• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.1
• /
• pp.151-157
• /
• 2009

This project would discuss how to improve the limit and enhance the accuracy and confidence and the improved algorithm path searching engine module shelter's interference limit on spot searching and analysing by using real time path finding technology and USB memo교 RF which is fused to a Tag(u-Card).

• Journal of Advanced Marine Engineering and Technology
• /
• v.31 no.4
• /
• pp.425-432
• /
• 2007

This paper describes a development of ship's refer-container remote monitoring system(RRMS). This system consists of Master, repeater with a switched mode power supply(SMPS) and slave terminal. Slave terminal is composed of wireless MODEM and microprocessor part, checks its conditions like temperature. humidity & etc through the interrogate port(IP) of refer-container. and transmits their data to master. Repeater's role is that connect so that signal which is transmitted from Slave Terminal by Master may not receive electric wave interference by container boxes. We verify the effectiveness of proposed system through the experimental works in container yard and ship.

• 한국정보통신설비학회:학술대회논문집
• /
• 2005.08a
• /
• pp.436-442
• /
• 2005

컨버전스시대의 도래에 따라 다양한 유무선통합서비스를 지원하기 위한 embedded WiFi 기술이 모바일 PC, PDA, 핸드폰, TV, PMP, 카메라, 비디오 게임기 및 로봇 장남감에 이르기 까지 다양하게 적용되고 있다. 이에 다양한 단말의 형태를 고려한 무선구간의 성능확보가 요구되고 있는 실정으로 본 논문에서는 DBDM (Dual Band Dual Mode) 단말인 NESPOT Swing 단말을 근간으로 안테나 위치 최적화에 대한 기술과 단말 RF 및 기지국 안테나의 특성을 고려한 필드 성능 측정 방법에 대하여 기술하고, 이론적 분석과 실측정치를 제시하고자 한다. 본 연구의 결과는 앞으로 다양한 환경에서 사용이 예상되는 WiFi 기지국의 설치 및 embedded WiFi 단말의 안테나 구성과 RE모듈 성능 확보에 활용될 수 있을 것으로 기대된다.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.9 no.2
• /
• pp.48-55
• /
• 2010

This paper proposes a realtime tracking algorithm of mobile object in indoor or outdoor environment. For this purpose the proposed system selects location data closer to mobile objects in real time using Triangulation method and DCM (Database Correlation Method). Also, this system utilizes the adjusted location data selected by using Kalman filter to improve the location accuracy of transfer object. Be studied in existing the Kalman filter have unstable location data until its settlement because of it extracts current values by using the past the information. However, proposed location tracking system don't apply existent Kalman filter to this system and it permits precisional tracking location by using more effective methods.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.2
• /
• pp.259-268
• /
• 2023

In this paper, it is said that the quality of wireless service has been improved by providing wireless service that can eventually overcome wired wires by using 2.4GHz band wireless access technology that supports 2.4/5GHz dual band. Increasing the maintenance cost incurred when building wireless CCTV, makes it possible to connect with existing CCTV, and study about expanding the service area of A/V surveillance system using CCTV.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2020.07a
• /
• pp.58-61
• /
• 2020

본 논문은 UHD 모바일 환경에서 서비스 핸드오프를 위한 관련 파라미터를 DNS 프로토콜을 적용하여 통신망을 통해 제공하기 위한 서비스 핸드오프 제공 방법에 관한 것이다. 이를 위해 본 논문에서는 DNS 기반 서비스 핸드오프 프레임워크를 기술하고, 관련 기능을 검증하기 위한 서비스 핸드오프 송신 플랫폼과 RF 간 또는 RF 와 브로드밴드 간 핸드오프를 처리하기 위한 수신 플랫폼을 소개하고자 한다. 제안한 방법을 적용할 경우 지상파 UHD 모바일 수신기에 브로드밴드 모듈이 탑재될 경우, 사용자의 이동 동선에 최적으로 서비스 핸드오프 정보를 적응적으로 제공할 수 있어 핸드오프 성능을 향상시킬 수 있다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.8
• /
• pp.632-639
• /
• 2018

This paper presents a single antenna radar sensor with a Ku-band radar transceiver IC realized by 130 nm CMOS processes. In this radar receiver, sensitivity time control using a DC offset cancellation feedback loop is employed to achieve a constant SNR, irrespective of distance. In addition, the receiver RF block has gain control to adjust high dynamic range. The RF output power is 9 dBm and the full chain gain of the Rx is 82 dB. To reduce the direct-coupled Tx signal to the Rx in a single antenna radar, a stub-tuned hybrid coupler is adopted instead of a bulky circulator. The maximum measured distance between the horn antenna and a metal plate target is 6 m.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.4
• /
• pp.32-38
• /
• 2011

This paper describes implementation of the 5.0GHz RF frequency synthesizer with 0.18${\mu}m$ silicon CMOS technology being used as an application of the IEEE802.15.4 USN sensor node transceiver modules. To get good performance of speed and noise, design of the each module like VCO, prescaler, 1/N divider, fractional divider with ${\Sigma}-{\Delta}$ modulator, and common circuits of the PLL has been optimized. Especially to get excellent performance of high speed and wide tuning range, N-P MOS core structure and 12 step cap banks have been used in design of the VCO. The chip area including pads for testing is $1.1{\times}0.7mm^2$, and the chip area only core for IP in SoC is $1.0{\times}0.4mm^2$. Through analysing of the fabricated frequency synthesizer, we can see that it has wide operation range and excellent frequency characteristics.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.44 no.3
• /
• pp.37-42
• /
• 2007

This paper reconsiders established power conservation models for ubiquitous sensor networks that use relay nodes instead of direct communication and proposes novel network power consumption model with consideration of the channel level and radio chip level simultaneously. We estimate the effect of minimum hop-count policy in terms of network power consumption through simulation of various situations for low power RF module CC2420. It is observed that maximum RF power and minimum hop-count results in lower energy consumption relatively. Also, in total network energy consumption, which is included re-transmission, minimum hop count policy presents decrease by 33.1% of energy consumption in compare with the conventional model.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.5
• /
• pp.49-54
• /
• 2009

This paper describes implementation of the 1.9GHz RF frequency synthesizer with $0.18{\mu}m$ silicon CMOS technology being used as an application of the USN sensor node transceiver modules. To get good performance of speed and noise, design of the each module like VCO, prescaler, 1/N divider, fractional divider with ${\Sigma }-{\Delta}$ modulator, and common circuits of the PLL has been optimized. Especially to get good performance of speed, power consumption, and wide tuning range, N-P MOS core structure has been used in design of the VCO. The chip area including pads for testing is $1.2{\times}0.7mm^2$, and the chip area only core for IP in SoC is $1.1{\times}0.4mm^2$. The test results show that there is no special spurs except -63.06dB of the 6MHz reference spurs in the PLL circuitry. There is good phase noise performance like -116.17dBc/Hz in 1MHz offset frequency.