• 제목/요약/키워드: RF/V

검색결과 1,388건 처리시간 0.029초

정전 용량형 SP4T RF MEMS 스위치 구동용 4채널 승압 DC-DC 컨버터 (Four Channel Step Up DC-DC Converter for Capacitive SP4T RF MEMS Switch Application)

  • 장연수;김현철;김수환;전국진
    • 대한전자공학회논문지SD
    • /
    • 제46권2호
    • /
    • pp.93-100
    • /
    • 2009
  • 본 논문에서는 전하 펌프(charge pimp) 방식의 전압 더블러(voltage doubler) 구조를 이용한 4채널 DC-DC 컨버터 개발을 소개한다. 무선 통신 트랜시버 내부에 위치하는 FEM(Front End Module)에서의 사용을 목표로 연구 개발 중인 정전 용량형 SP4T RF MEMS 스위치 구동용 DC-DC 컨버터를 개발하였다. 소비 전력이 적으며 작은 면적을 차지하는 전하 펌프 구조와 10MHz 스위칭 주파수를 이용하여 3.3V에서 $11.3{\pm}0.1V$, $12.4{\pm}0.1V$, $14.1{\pm}0.2V$로 승압한다. 전압 레벨 변환기(Voltage level shifter)를 이용하여 DC-DC 컨버터의 출력을 3.3V 신호로 선택적으로 온오프(on/off) 할 수 있으며 정전 용량형 MEMS 기기에 선택적으로 전달할 수 있도록 구현하였다. 칩 외부에 수동 소자를 추가하지 않고 칩 내부에 CMOS 공정 중에 제작된 저항과 커패시터만으로 원하는 출력을 낼 수 있도록 설계하였다. 전체 칩의 크기는 패드를 포함하여 $2.8{\times}2.1mm^2$이며 소비 전력은 7.52mW, 7.82mW, 8.61mW이다.

The HPRF system for PEFP 20MeV proton linac

  • Seol, K.T.;Kwon, H.J.;Song, Y.G.;Park, M.Y.;Cho, Y.S.
    • 한국원자력학회:학술대회논문집
    • /
    • 한국원자력학회 2004년도 추계학술발표회 발표논문집
    • /
    • pp.683-684
    • /
    • 2004
  • The RF system for PEFP 20MeV proton linear accelerator is described. The RF system for 3MeV RFQ was already installed and operated to drive the RFQ. The klystron was tested up to 600kW itself and operated up to 350kW routinely. The HPRF dummy load was stabilized with the change of the coolant. Preparation of 20MeV DTL HPRF test has been completed. LCP and PLC system for klystron power supply was already prepared. Voltage fluctuation was measured during klystron test. Voltage control feedback loop seems to be re-adjusted.

  • PDF

Ka-band high-$T_c$ superconductor and III-V semiconductor hybrid balanced mixer

  • Kwak, M.H.;Suh, J.D.;Kang, Kwang-Yong;Han, S.K.
    • 한국초전도학회:학술대회논문집
    • /
    • 한국초전도학회 2000년도 High Temperature Superconductivity Vol.X
    • /
    • pp.15-20
    • /
    • 2000
  • We demonstrated a single balanced mixer of the combination of high-T. superconductor (HTS) and III-V GaAs beam lead Schottky diodes operating in the mini-cryogenic chamber. The HTS hybrid mixer was designed with a center frequency of 27.5 GHz and a bandwidth of 1 GHz, and consisted of a rat-race coupler circuit with beam-lead diodes attached to its balanced ports. The HTS hybrid mixer with 1 GHz RF bandwidths exhibits a conversion loss of 6 dB. A LO-to-RF isolation was greater than 40 dB in the range of operating frequencies. Since the HTS/III-V hybrid mixer devices have lower noise and conversion loss, this technique provide us with new capabilities that can be effectively utilized in the field of local-point distribution service (LMDS) systems.

  • PDF

최대추파 10 GHz GaN MESFET의 소자특성 (Device Characteristics of GaN MESFET with the maximum frequency of 10 GHz)

  • 이원상;정기웅;문동찬;신무환
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 1999년도 춘계학술대회 논문집
    • /
    • pp.497-500
    • /
    • 1999
  • This paper reports on the fabrication and characteristics of recessed gate GaN MESFETs fabricated using a photoelectrochemical wet etching method. The unique etching process utilizes photo-resistive mask and KOH based etchant. GaN MESFETs with successfully recessed gate structure was characterized in terms of dc and RF performance. The fabricated GaN MESFET exhibits a current saturation at $V_{DS}$ = 4 V and a pinch-off at $V_{GS}$ =-3V The peak drain current of the device is about 230mA/mm at 300 K and the value is remained almost same for 500K operation. The $f_{T}$ and $f_{max}$ from the device are 6.357Hz and 10.25 GHz, respectively.y.y.

  • PDF

2.4/5GHz 이중대역 RF 설계 기술에 대한 연구 (A Study on 2.4/5GHz Dual-Band RF Design Technology)

  • 정병익;석경휴
    • 한국전자통신학회논문지
    • /
    • 제18권2호
    • /
    • pp.259-268
    • /
    • 2023
  • 본 논문에서는 2.4GHz 밴드 무선 접속 기술을 2.4/5GHz 이중대역을 지원하는 기술을 이용하여 유선의 한계성을 극복할 수 있는 무선 서비스 제공으로 무선 공공서비스의 품질을 향상시키고자 한다. 무선 CCTV 구축시 발생되는 유지 보수 비용을 절감 시키고, 기존 유선 CCTV와 연동 가능해져 CCTV를 이용한 A/V 감시시스템 서비스 영역을 확대에 대해 연구한다.

간흡충에 대한 살충성 물질에 관한 연구 V. 잉어 체표점액내 살충성물질의 화학적 성상 (The Wormicidal Substance of Fresh Water Fishes on Clonorehis sinensis V. Purification and Chemical Charaeterization of Clonorehicidal Substance from Epidermal Mucus of Cyprinus carpio)

  • 이재구;안병준
    • Parasites, Hosts and Diseases
    • /
    • 제22권1호
    • /
    • pp.127-134
    • /
    • 1984
  • As a series of studies to clarify clonorchicidal substances in body surface mucus of some freshwater fishes, the substance in the epidermal mucus of Cyprinus carpio was isolated by silica gel column and thin layer chromatography and analysed for its chemical nature. Wormicidal trial was done in vitro, and the results obtained are summarized as follows: The mucus was extracted by ethyl ether and separated into 4 fractions by column chromatography using benzene as solvent. The second fraction with yellowish red colour among them showed the strongest clonorchicidal effect. The yellowish red fraction obtained by column chromatography was then fractionated into 6 spots by thin layer chromatography with petrol/ etherjchloroform (30/70, v/v), and the Rf. 0.714 spot among the 6 spots showed the strongest effect. The Rf. 0.714 spot was further fractionated into 6 spots by thin layer chromatography with benzene/acetone (90/10, vlv), and the Rf. 0.800 spot among the later 6 spots revealed the strongest effect. The Rf. 0.800 spot was chromatographed on column with benzene and 2 fractions were obtained. The second fraction of light brown colour represented the final purified fraction. By these Purification Procedures, clonorchicidal substance was Purified 15-fold with 0.035 yield from the mucus of C. carpio, and 10mg of the final fraction killed the cercaria in 26 min, the metacercaria in 115 min, and the adult in 443 min. Infra red and nuclear magnetic resonance spectrometric analysis of the purified substance revealed that the substance belongs to an ethyl ester of unsaturated fatty acid with 2 double bonds, 15 methylene groups and 1 methyl group.

  • PDF

RF 마그네트론 스퍼터링법으로 제조한 SnS 박막의 구조적 및 광학적 특성 (Structural and Optical Properties of SnS Thin Films Deposited by RF Magnetron Sputtering)

  • 황동현
    • 한국표면공학회지
    • /
    • 제51권2호
    • /
    • pp.126-132
    • /
    • 2018
  • SnS thin films with different substrate temperatures ($150 {\sim}300^{\circ}C$) as process parameters were grown on soda-lime glass substrates by RF magnetron sputtering. The effects of substrate temperature on the structural and optical properties of SnS thin films were investigated by X-ray diffraction (XRD), Raman spectroscopy (Raman), field-emission scanning electron microscopy (FESEM), energy dispersive X-ray spectroscopy (EDS), and Ultraviolet-visible-near infrared spectrophotometer (UV-Vis-NIR). All of the SnS thin films prepared at various substrate temperatures were polycrystalline orthorhombic structures with (111) planes preferentially oriented. The diffraction intensity of the (111) plane and the crystallite size were improved with increasing substrate temperature. The three major peaks (189, 222, $289cm^{-1}$) identified in Raman were exactly the same as the Raman spectra of monocrystalline SnS. From the XRD and Raman results, it was confirmed that all of the SnS thin films were formed into a single SnS phase without impurity phases such as $SnS_2$ and $Sn_2S_3$. In the optical transmittance spectrum, the critical wavelength of the absorption edge shifted to the long wavelength region as the substrate temperature increased. The optical bandgap was 1.67 eV at the substrate temperature of $150^{\circ}C$, 1.57 eV at $200^{\circ}C$, 1.50 eV at $250^{\circ}C$, and 1.44 eV at $300^{\circ}C$.

mm-wave용 전력 PHEMT제작 및 특성 연구 (Studies on the Fabrication and Characteristics of PHEMT for mm-wave)

  • 이성대;채연식;윤관기;이응호;이진구
    • 대한전자공학회논문지SD
    • /
    • 제38권6호
    • /
    • pp.383-389
    • /
    • 2001
  • 본 논문에서는 밀리미터파 대역에서 응용 가능한 AIGaAs/InGaAs PHEMT를 제작하고 특성을 분석하였다. 제작에 사용된 PHEMT 웨이퍼는 ATLAS 시뮬레이터를 이용하여 DC 및 RF 특성을 최적화 하였다. 게이트 길이가 0.35 ㎛이고 서로 다른 게이트 폭과 게이트 핑거 수를 갖는 PHEMT를 전자빔 노광장치를 이용하여 제작하였다. 제작된 소자의 게이트 길이와 핑거수에 따른 RF 특성변화를 측정 분석하였다. 게이트 핑거 수가 2개인 PHEMT의 DC 특성으로 1.2 V의 무릎 전압, -1.5 V의 핀치-오프 전압, 275 ㎃/㎜의 드레인 전류 밀도 및 260.17 ㎳/㎜의 최대 전달컨덕턴스를 얻었다. 또한 RF 특성으로 35 ㎓에서 3.6 ㏈의 S/sub 21/ 이득, 11.15 ㏈의 MAG와 약 45 ㎓의 전류 이득 차단 주파수 그리고 약 100 ㎓의 최대 공진주파수를 얻었다.

  • PDF

산소 혼합 비율에 따른 RF 스퍼터링 ZnO 박막과 n-ZnO/p-Si 이종접합 다이오드의 특성 (Effect of Oxygen Mixture Ratio on the Properties of ZnO Thin-Films and n-ZnO/p-Si Heterojunction Diode Prepared by RF Sputtering)

  • 권익선;김단비;김예원;연응범;김선태
    • 한국재료학회지
    • /
    • 제29권7호
    • /
    • pp.456-462
    • /
    • 2019
  • ZnO thin-films are grown on a p-Si(111) substrate by RF sputtering. The effects of growth temperature and $O_2$ mixture ratio on the ZnO films are investigated by scanning electron microscopy (SEM), X-ray diffraction (XRD), and room-temperature photoluminescence (PL) measurements. All the grown ZnO thin films show a strong preferred orientation along the c-axis, with an intense ultraviolet emission centered at 377 nm. However, when $O_2$ is mixed with the sputtering gas, the half width at half maximum (FWHM) of the XRD peak increases and the deep-level defect-related emission PL band becomes pronounced. In addition, an n-ZnO/p-Si heterojunction diode is fabricated by photolithographic processes and characterized using its current-voltage (I-V) characteristic curve and photoresponsivity. The fabricated n-ZnO/p-Si heterojunction diode exhibits typical rectifying I-V characteristics, with turn-on voltage of about 1.1 V and ideality factor of 1.7. The ratio of current density at ${\pm}3V$ of the reverse and forward bias voltage is about $5.8{\times}10^3$, which demonstrates the switching performance of the fabricated diode. The photoresponse of the diode under illumination of chopped with 40 Hz white light source shows fast response time and recovery time of 0.5 msec and 0.4 msec, respectively.