• 농업과학연구
• /
• 제50권3호
• /
• pp.513-525
• /
• 2023

This study was conducted to compare the level of vegetation recovery based on the forest restoration techniques (natural restoration and artificial restoration) determined using the satellite imagery that targeted forest fire damaged areas in Goseong-gun, Gangwon-do. The study site included the area affected by the Goseong forest fire (1996) and the East Coast forest fire (2000). We conducted a time-series analysis of satellite imagery on the natural restoration sites (19 sites) and artificial restoration sites (12 sites) that were created after the forest fire in 1996. In the analysis of satellite imagery, the difference normalized burn ratio (dNBR) and normalized difference vegetation index (NDVI) were calculated to compare the level of vegetation recovery between the two groups. We discovered that vegetation was restored at all of the study sites (31 locations). The satellite image-based analysis showed that the artificial restoration sites were relatively better than the natural restoration sites, but there was no statistically significant difference between the two groups (p > 0.05). Therefore, it is necessary to select a restoration technique that can achieve the goal of forest restoration, taking the topography and environment of the target site into account. We also believe that in the future, accurate diagnosis and analysis of the vegetation will be necessary through a field survey of the forest fire-damaged sites.

• 한국환경복원기술학회지
• /
• 제8권2호
• /
• pp.83-89
• /
• 2005

The historical changes of seeding work in Japan, the typical slope revegetation method, is possible to divide into five periods as follows; 1) The early period after creation(1927-1948) 2) The spreading period of modern revegetation work with manpower(1947-1958) 3) The spreading period of rapid revegetation technique using exotic grasses with machineries(1959-1985${\dots}$) 4) The spreading period of rapid reforestation technique by fast growing species mainly using leguminous shrub species(1986-1995${\dots}$) 5)The developing period of nature restoration technique using endemic arborous species(1996-) The evaluation basis of vegetated condition after slope seeding has been described to a official guide book, "The Standards of Slope Stabilizing Works" It was mainly revised three times after first edition in 1972, and also the point of evaluation basis changed from the vegetation coverage to the density of woody plant through the 3rd period and the 4th period Recently main purpose of slope seeding has been developing from the erosion protection to the nature restoration in the current of the 5th period, and "The tentative guidelines of slope nature restoration" was announced by The Slope Revegetation Section of Japanese Society of Revegetation Technology in 2004. It was proposed the planning techniques of using suitable seeds/plants based on the preservation level at the real each construction sites Consequently, at present the importance of advanced monitoring methods for vegetation maintenance and plant sociologic survey to evaluate the plant succession is increasing.

• 대한치과보철학회지
• /
• 제39권3호
• /
• pp.313-318
• /
• 2001

Masticatory function is more important than esthetics in posterior fixed restoration. The usual technique-mounting the casts on a semi-adjustable articulator, etc. -cannot make all patients satisfied with their restorations. For example, functionally generated path technique can be an easier and more satisfactory method in the restoration of group function. These clinical reports describe various approaches for occlusal restoration of relatively simple posterior fixed protheses according to patients occlusal patterns. The 3-unit bridge restoration is one of the most popular treatment options in prosthodontics. Because dentists have much experiences of it, they restore a missing span of one tooth mechanically, that is, without special consideration. While esthetics is important in making an anterior 3-unit fixed prostheses, mastication is more focused on in posterior 3-unit bridge restoration. Many dentists are concerned about various aspects in esthetics, such as morphology of the tooth, value, chroma, hue, translucency, surface texture, etc. But they do not usually consider various methods to restore occlusion. They treat one-tooth-missing area in a similar way in spite of patients having variety of occlusal patterns. Three cases are presented here in 3 or 4-unit bridge restoration. They show some methods to restore patients' occlusal patterns.

• Journal of Korean Dental Science
• /
• 제8권1호
• /
• pp.41-47
• /
• 2015

Even though a conventional metal ceramic restoration is widely in use, its laboratory procedure is still technique-sensitive, complex, and time-consuming. A ceramic-pressed-to-metal restoration (PTM) can be a reliable alternative. However, simplified laboratory procedure for a PTM is still necessary. The article is to propose a technique that reduces time and effort to fabricate a PTM with the aid of computer-aided design, computer-aided manufacturing and selective laser sintering technologies.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2008년도 정기총회 및 학술발표대회
• /
• pp.605-608
• /
• 2008

Storm and flood damage management systems in national disaster management system(NDMS) were organized into three operation systems. They are prevention, preparation, response, and recovery systems. Disaster resources in each system must be promptly and exactly applied to minimize casualties and loss of properties. However, the disaster resources in current management system can not be immediately used in calamity situation due to the lack of efficiency in statistical data. Therefore, it is necessary to classify the emergency restoration equipment for efficient management and mobilization of disaster resources in disaster situation. In this study, field survey was executed to appropriately classify the emergency restoration equipment. Problems and reformation points of the disaster resources system were also presented to improve the classification technique and to construct the data base.

• 전자공학회논문지S
• /
• 제35S권12호
• /
• pp.77-83
• /
• 1998

일반적으로 동영상은 물체의 움직임에 의해 움직임 열화를 겪는다. 본 논문의 목적은 이러한 움직임 열화의 해석을 위한 모델을 제시하고 정칙화된 반복 기법을 이용하여 이를 제거하기위한 복원방식을 제안하는 것이다. 제안된 모델에서는 기존의 공간 불변적인 모델의 한계를 극복하기 위하여 움직이는 물체와 정지된 배경과의 경계에서 일어나는 현상을 수학적으로 해석하게 된다. 그리고 복원 과정에서의 객체기반적 처리를 위하여 움직임을 기반으로 하는 영상 분할 기법을 소개하는데, 이 기법은 기존의 연구를 바탕으로 본 연구에 맞도록 응용하여 사용한다. 제안된 모델을 근거로 한 영상복원 기법은 제약조건을 이용한 반복적 방법으로서 사전에 추정된 열화정보를 이용하여 움직임 열화를 제거하개 된다. 제안된 방법의 성능은 실험결과로서 확인할 수 있다.

• 전기학회논문지
• /
• 제56권4호
• /
• pp.660-668
• /
• 2007

In order to improve the efficiency of service restoration function in the current Distribution Automation System (DAS), in this paper it is proposed a more advanced and efficient service restoration approach using Multi-Agent technique based on distributed networks. In the current DAS, communication networks or protocol structures are centralized with communications between the central station and FRTU through 1:1 connection. In order to maintain the current systems and enhance the proposed Multi-Agent based service restoration scheme, a device of communication and intelligence, named MASX, is newly developed to make a FRTU as an agent to cooperate each others. the proposed system applied in a demo system for an distribution automation system and shows 8 times reduction of restoration time in restoration of blackouts.

• 대한치과보존학회:학술대회논문집
• /
• 대한치과보존학회 2001년도 추계학술대회(제116회) 및 13회 Workshop 제3회 한ㆍ일 치과보존학회 공동학술대회 초록집
• /
• pp.595-595
• /
• 2001

As the interest for esthetic restoration is increasing, the usage of composite resin is increasing. The usage of composite resin is not limited to anterior teeth but is spreading to posterior area using direct ＆ indirect methods. Generally, dual or chemical cure resin cement has been used for setting composite or porcelain inlay restoration. However, chemical cure resin cement has limited working time and it's difficult to remove excess cement from the tooth and the restoration. The dual cured composite is also difficult to remove from the tooth surface.(omitted)

• 대한치과기공학회지
• /
• 제1권1호
• /
• pp.37-43
• /
• 1979

• Archives of Plastic Surgery
• /
• 제43권5호
• /
• pp.430-437
• /
• 2016

Background Accurate breast volume assessment is a prerequisite to preoperative planning, as well as intraoperative decision making in breast reconstruction surgery. The use of three-dimensional surface imaging (3D scanning) to assess breast volume has many advantages. However, before employing 3D scanning in the field, the tool's validity should be demonstrated. The purpose of this study was to confirm the validity of 3D-scanning technology for evaluating breast volume. Methods We reviewed the charts of 25 patients who underwent breast reconstruction surgery immediately after total mastectomy. Breast volumes using the Axis Three 3D scanner, water-displacement technique, and magnetic resonance imaging (MRI) were obtained bilaterally in the preoperative period. During the operation, the tissue removed during total mastectomy was weighed and the specimen volume was calculated from the weight. Then, we compared the volume obtained from 3D scanning with those obtained using the water-displacement technique, MRI, and the calculated volume of the tissue removed. Results The intraclass correlation coefficient (ICC) of breast volumes obtained from 3D scanning, as compared to the volumes obtained using the water-displacement technique and specimen weight, demonstrated excellent reliability. The ICC of breast volumes obtained using 3D scanning, as compared to those obtained by MRI, demonstrated substantial reliability. Passing-Bablok regression showed agreement between 3D scanning and the water-displacement technique, and showed a linear association of 3D scanning with MRI and specimen volume, respectively. Conclusions When compared with the classical water-displacement technique and MRI-based volumetry, 3D scanning showed significant reliability and a linear association with the other two methods.