• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.1533-1539
• /
• 2000

In this paper, we propose a design method using Taguchi method and a neural network. Using this method, we can design a dual-stage actuator having the required tracking/focusing properties in real time. Also, as an application of this method, a proposed dual-stage pick-up actuator having the required properties was designed. The seek time of this designed actuator is less than 13 msec by a time optimal technique. Simulation results show that this method can potentially be implemented in all the dual-stage actuators.

• Korean Journal of Veterinary Research
• /
• v.2 no.1
• /
• pp.37-50
• /
• 1962

Ten calves were subjected to general anesthesia with ten percent chlooral hydrate solution. The drug was administered by the method of slow intravenous injection so as to have a better control over the dosage and time until deep anesthesia was attained. Although one of ten calves failed to produce anesthesia, the remainder of nine responded satisfactorily with deep anesthesia. The dosage required averaged as great as 17.5gm per calf, and the time 23 minutes. In view of these advantages indicated in the results, further studies on the use of intravenous chloral hydrate for deep anesthesia in bovine species are to be justifiable.

• Journal of Chest Surgery
• /
• v.21 no.1
• /
• pp.101-108
• /
• 1988

Between July, 19S4. and July, 1987, 9 two-stage repair of symptomatic tetralogy of Fallot were carried out at the department of thoracic and cardiovascular surgery, Kyungpook national university hospital. Their age ranged from 5 years to 18 years [mean age 9.4 years] at the time of total correction, and there were improvement of systemic oxygen saturation values by 10% and decrease of hemoglobin by 1.6gm/dl after shunt procedures. The interval between the initial shunting procedure and total correction ranged for 7 to 101 months with a mean of 32.7 months. Four of these patients required patching of the infundibulum alone, three required patching of the right ventricular outflow tract across the pulmonary annulus, and valved conduit was used in one due to coronary artery anomaly. Aortic cross clamping time averaged 122.2minutes [range from 60minutes to 150minutes], and cardiopulmonary bypass time averaged 174.4 minutes [range from 80minutes to 300minutes]. The operative mortality rate was 22% [2/9].

• Proceedings of the Safety Management and Science Conference
• /
• 2002.11a
• /
• pp.233-238
• /
• 2002

The product process is sequence of all the required activities that a company must perform to develop, and manufacture a product. These activities include marketing, research, engineering design, quality assurance, manufacturing, and a whole chain of suppliers and vendors. The process also comprises all strategic planning, capital investments, management decisions, and tasks necessary to create a new product. manufacturing processes must be created so that the product can be produced in the product facility Purchasing new equipment and training workers may be required if new technology is to be used. Tools, fixtures, and the sequence of steps in the manufacturing processes must all be developed to allow rapid, high-quality, cost effective production. Also, it may be needed to be rearrange the production facility to adapt to the new manufacturing processes. Therefore, this study tries to proposed that Scheduling by customer needs group for minimizing the problem and reducing inventory, product development time, cycle time, and order lead time.

• Elastomers and Composites
• /
• v.9 no.1
• /
• pp.5-13
• /
• 1974

The characteristics of IR and IR blended elastomers, for footwear by means of blending with NR and SBR, have been studied. The results obtained were as follows: 1. The mastication of IR was almost not required, where as NR and SBR are necessary. Therefore mixing time was much reduced because of speedy filler feeding. 2. Disadvantage of low Mooney viscosity was covered by blending with NR and SBR, and by loading filler. Superior flow property in comparison to other polymers was worthy and valuable in providing formulas for mould flow, 3. The elongation property of green stocks and vulcanizates was shown smooth surface for extruded and calendered stocks, and facilitated fabrication processes. 4. Because of slow vulcanization, IR is required to control vulcanization time by adding proper accelerators. This property, in turn, made possible to improve the storing stability of green stocks by controlling scorch time.

• Proceedings of the IEEK Conference
• /
• 2002.06d
• /
• pp.351-354
• /
• 2002

DVR(Digital Video Recorder), a recently popular visual monitoring system, is required to support multi camera channel display(upto 16 channels) with various display modes in real-time. For such a multichannel display system, it is well known that tearing artifacts become more serious. Thus, one needs to design a display system for DVR so that it does not show tearing artifacts as much as possible, but keeps real-time display speed. In this paper, we present our efforts in designing and implementing a display system which rarely ever shows tearing artifacts, but without degradation of required real-time display speed, and which displays character information stably without blinking.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.11a
• /
• pp.92-93
• /
• 2014

Green Frame is a method for Rahmen structure construction composed of composite PC members. The composite PC members of Green Frame which are based on in-situ production can reduce the construction cost and are more likely to secure quality when compared to production in factories. Previous studies developed forms for in-situ production of Green Frame composite PC members and proposed algorithms to arrange them on site. However, it requires not only their arrangement, but also calculation of an accurate production period to produce the required PC members in a limited space and supply them in a timely manner. In particular, it is necessary to clearly define the properties of detailed processes for in-situ production of PC members and to calculate the time required for respective process. To do so, this study is a basic research on calculating the time for in-situ production using a linear scheduling method.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2000.10a
• /
• pp.257-264
• /
• 2000

Nonlinear dynamic time history analysis of a structure with energy dissipation devices is complicated and time consuming. In this regard the nonlinear static analysis is a practical alternative for evaluating the earthquake resisting capacity of a structure. In this study the nonlinear static response of a structure was obtained first, and the equivalent viscous modal damping ratio required to satisfy the performance objective was computed in the capacity spectrum format. Then proper amount of viscous dampers were installed to provide the required damping. Parametric study has been performed for the period of the structure, yield strength, and the stiffness after the first yield. According to the earthquake time history analysis results, the maximum displacement of the model structure with viscous dampers designed in accordance with the proposed method corresponds well with the target displacements that was used in the beginning of the design process.

• Journal of the Semiconductor & Display Technology
• /
• v.22 no.1
• /
• pp.59-63
• /
• 2023

Various devices have been emerging as a means of measuring indoor air quality, and among them, there are devices that support real-time remote monitoring through IoT technology and a cloud environment. To improve indoor air quality, based on the results determined by measuring devices, air purifiers or ventilation systems may need to be operated, and temperature and humidity control may be required. In this paper, we propose a design of indoor air quality measuring devices required for indoor air quality evaluation, and of the system needed to control relevant devices to improve indoor air quality through the interaction with the measuring devices. Currently, the servers for the interaction of indoor air quality devices and IoT devices are divided into conventional server type and serverless type, comparing the differences in response time of IoT devices to changes of indoor air quality.

• The KIPS Transactions:PartC
• /
• v.11C no.5
• /
• pp.697-702
• /
• 2004

As for the digital content, a reproduction is easy and manuscript is identical with original copy. Because of these characteristics, there are difficulties on prevention of an illegal reproduction and an illegal currency. In recent days various digital content service systems based on a web are commercialized. An appropriate copyright protection technology is required so that these systems develop as a profit model. Generally we use encrypted digital content transmission method for the copyright protection on a web base system. At the time of this, it is increased sire of encrypted digital content. As for this, it be increased time required on an execution process. Therefore, a design of the system that considered a execution time and a security is required. In this study, we designed the digital content transmission system that considered execution time and a security through a partial encryption based on a digital content copyright management technique. Also we evaluated performance of a proposed system through analysis.