• Korean Journal of Animal Reproduction
• /
• v.10 no.1
• /
• pp.100-108
• /
• 1986

Eik-Nes (1966) reported that the mechanism of spermatogenesis is controlled by FSH and LH and maintaned normally in scrotum terperautre which is 3-5$^{\circ}C$ lower than body termperature. But Ojeda and Ramirez (1972) have described that the abdominal testis was shrinked severely and lost its normal function in congenital cryptorchidism or surgically induced cryptorchidism. Ramirez and Sawyer (1974) reported that the compensatory hypertorphy occured in the remaining testis of unilateral castration and the scrotal testis of unilateral cryptorchidism. Cunninham et al. (1978) reported that the serum FSH levle increased after unilateral castration. Frankel and Wright (1982) reported that the serum LH level was unchanged greatly after unilateral castration. Gomes and Jain (1976) reported that the serum testosterone level increased temporarily but not varied after unilateral castration. On the other hand, Kormano et al. (1964) reported that the serum FSH level in unilateral cryptorchidism rat was unchanged in contrast with the control and Risbirdger et al. (1981) reported that the serum LH level was unchanged till 2 weeks after operation and after then increased to 77%. Kim (1984) reported that the serum testosterone level was somewhat lower than that fo control group but there was't significant different. There were many different reports on hormone levels among different investigators when the immarue rats were castrated unilaterally or induced cryptorchidism unilaterally. Liang and Liang (1970) and Cunningham et al. (1978) described that there were no true compenastory hypertrophy in the remaining testis of unilateral castration and scrotal testis of unilateral testis of unilateral cryptorchidism in rat but they grew faster than that of control. Kormano et al.(1964), Damber et al.(1976), Cunningham et al.(1978) and Karpe et al.(1981) reported that the testis weight, germinal epithelia height and seminiferous tubules diameter developed continuously and similarily in the control, the remaining testis of unilateral castration and scrotal testis of unilateral cryptorchidism increased, however, in the abdominal testis of the unilateral cryptorchidism, they were much smaller than those of other groups. In observation of the histological changes in the seminiferous epithelium of control, remaining tesis of unilateral castration and scrotal testis of unilateral cryptorchidism differentiated and developed fully(Cunningham et al., 1978). However, the abdominal testis of unilateral crytorchidism degenerated severely and only the germ cells in early stage and Sertoli cells were found in the seminiferous tubules. (Damber et al., 1976, Gomes and Jain, 1976 and Karpe et al., 1981). By electron microscopic observation, Nagano (1963) and Leason and Leeson (1970) found that the abdominal testis of unilateral cryptorchidism was thicked in boundary tissue, increased lipid droplet in the Sertoli cell, disarranged axial filament complex and increased lipid inclusions in the Sertoli cell.

• Journal of Korean Academy of Nursing
• /
• v.4 no.1
• /
• pp.95-106
• /
• 1974

The Purpose of this study was to observe the body temperature changes of newborn infants in general crib and electric heat crib after birth for the period required to reach the optimum body temperature. Forty-seven newborn infants who were delivered at Seoul National University Hospital during the period from June 12 to September 13, 1973 were chosen as Subjects for this study. The criteria for the choice of subjects were the babies with normal spontaneous delivery; body weight 2.5kg and over at birth; Apgar so ore seven and over and gestation period over thirty-six weeks. Of these subjects, by random sampling thirty-one newborn infants were placed in the general crib and sixteen in the electric-heat crib. The rectal body temperature of these newborn infants were taken and recorded at fifteen-minute interval for the first one hour period after birth, at thirty minute interval for the next two hours and at one hour interval for the remaining period up to eight hours. The results of the study were as follows: 1. The mean body temperature of the newborn infants on admission to nursery ranged from 98.7℉. to 99℉. irrespective of the body weight and the room temperature. 2. There was a significant difference in the body temperature changes of the newborn infants as a total between the general crib and the electric-heat crib from three to eight hours after birth. It was found that the body temperature of the newborn infants in the electric-heat crib was significantly higher than that of the newborn infants in the general crib. 3. In comparison with the body temperature changes of the newborn infants in the general crib, the newborn infants in the electric- heat crib exhibited significantly higher body temperatures in all three body weight groups; from four to eight hours after birth in the 2.5-2.9kg body weight group; from three to seven hours after birth in the 3.0-3.4kg body weight group; from two and half to six hours after birth in the group with body weight over 3.5kg. 4. Time required to reach 98℉. of body temperature was four hours in the 3.5-2.9kg body weight group, three hours in the 3.0-3.4kg. body weight group and two and half hours in the group with body weight over 3.5kg in the electric- heat crib. In the general crib, it took over eight hours in the 2.5-2.9kg body weight group and five hors in both the 3.0-3.4kg and over 3.5kg body weight group to reach 98℉ of body temperature. 5. The lowest mean body temperature of newborn infants in both general and electric- heat crib appeared in forty-five minute after birth and the temperature ranged from 96.4℉ to 96.5℉. 6. The mean body temperature of the newborn infants in the general crib was increased as the room temperature. 7. The body weight, the room temperature and the time elapsed after birth fore proved to be significant factors influencing the body temperature changes of newborn infants. From tile above results, the three hypotheses were positively accepted.

• The Korean Journal of Ecology
• /
• v.27 no.3
• /
• pp.165-171
• /
• 2004

Weight loss and nutrients dynamics during decomposition of oak roots (diameter classes: R₁〈0.2㎝, 0.5㎝〈R₂〈1㎝, 1㎝〈R₃〈2㎝, 2㎝.〈R₄〈4㎝) (Quercus acutissima) were studied for 33-months in Kongiu, Korea. After 33-months, decomposition rate of R₁, R₂, R₃ and R₄ was 49.6%, 47.5%, 66.4% and 66.1%, respectively. The decomposition constant(k) for R₁, R₂, R₃, and R₄ was 0.249/yr, 0.234/yr, 0.397/yr and 0.393/yr, respectively. Larger diameter class of the root lost more weight than smaller diameter class. N concentration in decomposing oak roots increased in all diameter classes. After 33-months, remaining N in R₁, R₂, R₃ and R₄ was 66.5%, 80.7%, 84.4% and 44.4%, respectively. K concentration in decomposing oak roots decreased in early part of decomposition and then increased in later stage of decomposition. After 33-months, remaining P in R₁, R₂, R₃ and R₄ was 64.7%, 62.4%, 93.1% and 30.7%, respectively. K concentration in decomposing oak roots decreased rapidly in early stage of decomposition. Remaining K in R₁, R₂, R₃ and R₄ was 11.6%, 10.6%, 5.9% and 7.7%, respectively. Ca concentration in decomposing oak roots showed different among diameter classes. After 33-months, remaining Ca in R₁, R₂, R₃ and R₄ was 66.2%, 51.0%, 39.1% and 48.3%, respectively. Initial concentration of Mg in oak root was higher in smaller diameter class. After 33-months, remaining Mg in R₁, R₂, R₃ and R₄ was 15.3%, 29.9%, 24.5% and 69.4%, respectively.

• Journal of Plant Biology
• /
• v.11 no.1
• /
• pp.7-14
• /
• 1968

Buckwheat seeds produced in previous year (1965) in an experimental pot culture in which nine levels of P-32 ranging from $1.4{\times}10-4 to 3.3{\times}104$\mu$c/pot(as of 27 July 1965)$, with the same specific activity, had been applied to the corresponding pots respectively, were used this year(1996) in water and soil culture as well as in germination test to investigate the feature and extent of possible residual effects of P-32 incorporated upon germination and plant growth, and the following results were obtained: 1. Under the given experimental conditions both stimulative and inhibitory effects of radiation were observed. 2. The germination rate of the seeds was lower at the higher level of P-32 aplication ranging from $3.0{\times}103 to 3.3{\times}104$\mu$c/pot$ and higher at 0.2 $\mu$c P/pot than the control. 3. Among the seeds produced at the higher level of application about 80% was failed to germinate, owing to the radiation injury. The remaining 80% was failed to germinate, owing to the radiation injury. The remaining 80% survived the damaging effect and showed vigorous growth and increased yield. The latter group of seeds thus proved themselves to be more radioresistant than the former. 4. The survived seeds produced later more straw and root on dry weight basis. The higher the level of P-32 applied, the stronger the stimulative effect showed in vegetative growth. 5. No radiation effect on linear growth of the plants was observed in the soil culture. 6. The dry weight of straw produced showed little difference at the moderate range compared with that of control in the soil culture. At high level of application, i.e. over $\mu$c P32/pot, however, the production was increased by 12-37% of control. 7. As for the dry weight of root harvested, the P-32 treatment over 24$\mu$c P32/pot produced 82-155% more than the control, whereas little difference was observed under 2.2$\mu$c P32/pot. 8. The seed production increased in general by the P-32 treatments. Particularly at the moderate level of application the rate of increase amounted to 70% of the control. 9. Those individual plants which survived damaging effects of radiation at the germinating stage shwoed remarkable stimulative effects both in vegetative and in reproductive stage of growth.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.20 no.4
• /
• pp.357-365
• /
• 2018

This study was carried out to evaluate the weight loss rates, carbon and nitrogen dynamics of wood stakes following soil amendment treatments (CLB: compound fertilizer + lime + biochar; LB: lime + biochar) in a post-fire restoration area, Ulsan Metropolitan city, southern Korea. Soil amendments in the fire-disturbed area were applied to two-times (Mar. and Jun. 2015, 2016) during the study period. Wood stakes on Mar. 2015 were buried at a top 15cm of mineral soil in two soil amendment and control treatments of Liriodendron tulipifera, Prunus yedoensis, Quercus acutissima, Pinus thunbergii plantations and an unplanted area in the post-fire restoration area. Wood stakes were collected at Oct. 2015, Mar. 2016 and Oct. 2016 to measure weight loss rates, organic carbon and nitrogen concentrations. Weight loss rates of wood stakes were not significantly affected by soil amendment treatments. However, remaining carbon of wood stakes were lowest in the control treatment (43.7%), followed by the CLB (71.3%) and the LB (71.6%) treatments. Remaining nitrogen of wood stakes was less in the control treatment (29.7%) compared with the LB treatment (52.6%). The results indicate that carbon and nitrogen mineralization of wood stakes in post-fire restoration area were delayed by soil amendment treatments.

• Journal of Microbiology and Biotechnology
• /
• v.25 no.3
• /
• pp.399-406
• /
• 2015

In this study, we developed a composite filler comprising cross-linked hyaluronic acid (HA) and human collagen (COL) derived from the human umbilical cord with the aim of improving its biocompatibility and longevity compared with commercially available fillers. After HA/COL composite fillers were made in two different ratios (10:1 and 5:1), the physical properties of the fillers were evaluated. The interior morphologies and in vivo weight change of these hydrogels were also characterized at 1-16 weeks after injection into mice. To evaluate their biocompatibility and durability in vivo, we injected the composite fillers into nude mice subcutaneously. The variations of injected gel weight were measured and compared with the commercial dermal fillers (Restylane and TheraFill). The composites showed improved or similar physical properties (complex viscosity of 19-22 × 10⁵ cP, and injection force of 10-12 N) over the commercial dermal fillers. Sixteen weeks following the injection, the ratio of remaining composite filler weight to initial weight (75.5 ± 16.9%; 10:1) was shown to be greater than that of the commercial fillers (43.2 ± 8.1%, Restylane; 12.3 ± 5.3%, TheraFill). In addition, immunohistochemical analysis with angiogenesis-related markers such as isolectin and vWF revealed newly formed blood vessels and cellular influx into the composite filler, which were not observed in the other fillers. These results clearly suggest that the HA/COL composite filler is a superior candidate for soft tissue reconstruction. The filler we developed may be a suitable candidate as an injectable dermal filler for tissue augmentation in humans.

• KSBB Journal
• /
• v.14 no.6
• /
• pp.655-660
• /
• 1999

Supercritical fractional extraction of DHA and EPA from the mixture of fatty acids composing the fish oil was performed. The compositions, extracted quantities, and cumulative extracted quantities of fatty acids in the extract and the raffinate were investigated according to the fractional steps. The temperature and pressure for the miximum concentration of DHA and EPA in the extract or the raffinate were 60$^{\circ}C$ and 101 bar respectively among the extraction conditions considered in this study. In this case, the weight percent of EPA in the extract was 50% and that of DHA in the raffinate was 40%. These values were two times higher than those in fish oil. THe same temperature and pressure were used to extract DHA and EPA from the mixture of fatty acids whose the initial weight percent of DHA was 34%. The weight percent of DHA in the raffinate after the fourth fractionation was 7-%. And the remaining weight of DHA in the raffinate was 80% of DHA initially loaded in the extraction vessel.

• 한국태양에너지학회:학술대회논문집
• /
• 2012.03a
• /
• pp.211-216
• /
• 2012

Proton Exchange Membrane Fuel Cells (PEMFC) are the most appropriate for energy source of small robot applications. PEMFC has superior in power density and thermodynamic efficiency as compared with the Direct Methaol Fuel Cell (DMFC). Furthermore, PEMFC has lighter weight and smaller size than DMFC which are very important factors as small robot power system. The most significant factor of mobile robots is weight which relates closely with energy consumption and robot operation. This research tried to find optimum specifications in terms of type, number of cell, active area, cooling method, weight, and size. In order to find optimum 500W PEMFC, six options are designed in this paper and studied to reduce total stack weight by applying new materials and design innovations. However, still remaining problems are thermal management, robot space for energy sources, and so on. For a thermal management, design options need to analysis of Computational Fluid Dynamics (CFD) for determining which option has the improved performance and durability.

• Asian-Australasian Journal of Animal Sciences
• /
• v.28 no.1
• /
• pp.135-142
• /
• 2015

This study was conducted to evaluate the effect of inclusion of propolis extraction residue in the feed of broilers from 1 to 21 d of age on phagocytic activity of macrophages, cutaneous basophil hypersensitivity response to phytohemagglutinin, antibody production against Newcastle disease, lymphoid organ weight and hematological profile and to determine the optimal level of inclusion. 120 chicks, reared in metabolism cages until 21 days of age, were distributed in a completely randomized design, with five treatments (0%, 1%, 2%, 3%, and 4% of propolis residue) and six replications. The relative weight of thymus and monocyte percentage were affected by propolis residue, with a quadratic response (p<0.05) and lowest values estimated at 2.38% and 2.49%, respectively. Changes in relative weight of cloacal bursa and spleen, percentage of lymphocyte, heterophil, basophil, eosinophil, and heterophil:lymphocyte ratio, antibody production against Newcastle disease, phagocytic activity of macrophages and the average number of phagocytosed erythrocytes were not observed. The nitric oxide production with regard to positive control (macrophages+erythrocytes) decreased linearly (p<0.05) with increased doses of propolis residue. The remaining variables of nitric oxide production (negative control - macrophages, and difference between the controls) were not affected by propolis residue. The cutaneous basophil hypersensitivity response to phytohemagglutinin as determined by the increase in interdigital skin thickness exhibited a quadratic response (p<0.05), which predicted a lower reaction response at a dose of 2.60% of propolis residue and highest reaction response after 43.05 hours of phytohemagglutinin injection. The inclusion of 1% to 4% of propolis extraction residue in broiler diets from 1 to 21 days of age was not able to improve the immune parameters, despite the modest changes in the relative weight in thymus, blood monocyte percentage, nitric oxide concentration, and interdigital reaction to phytohemagglutinin.

• Smart Structures and Systems
• /
• v.23 no.3
• /
• pp.263-278
• /
• 2019

Moving train load parameters, including train speed, axle spacing, gross train weight and axle weights, are identified based on strain-monitoring data. In this paper, according to influence line theory, the classic moving force identification method is enhanced to handle time-varying velocity of the train. First, the moments that the axles move through a set of fixed points are identified from a series of pulses extracted from the second derivative of the structural strain response. Subsequently, the train speed and axle spacing are identified. In addition, based on the fact that the integral area of the structural strain response is a constant under a unit force at a unit speed, the gross train weight can be obtained from the integral area of the measured strain response. Meanwhile, the corrected second derivative peak values, in which the effect of time-varying velocity is eliminated, are selected to distribute the gross train weight. Hence the axle weights could be identified. Afterwards, numerical simulations are employed to verify the proposed method and investigate the effect of the sampling frequency on the identification accuracy. Eventually, the method is verified using the real-time strain data of a continuous steel truss railway bridge. Results show that train speed, axle spacing and gross train weight can be accurately identified in the time domain. However, only the approximate values of the axle weights could be obtained with the updated method. The identified results can provide reliable reference for determining fatigue deterioration and predicting the remaining service life of railway bridges.