• 한국항공우주학회지
• /
• 제31권4호
• /
• pp.82-91
• /
• 2003

이중 충돌형(unlike doublet impinging) 분사기의 직경변화에 따른 혼합특성을 모사 추진제에 의한 실험적인 방법으로 연구하였다. 분사유동은 레이놀즈수 2,500부터 12,000 사이의 난류제트를 사용하였으며, 분사공 직경 비를 1부터 1.5까지 확대시켜 직경변화에 따른 혼합특성을 고찰하였다. 분사공의 형상변수는 최적의 혼합특성을 갖는 설계치로 고정하였으며, 대기압 하의 분사유동장의 공기역학적 영향은 배제하였다. 매개변수로서 운동량비를 사용하여 혼합효율의 변화(mixing doublet impinging)를 고찰하였으며, 패터네이터(patternater)를 사용하여, 연료와 산화제의 국소 질량분포 측정 및 혼합비 분포를 측정하였다. 운동량비와 혼합효율의 상관성을 침투정도로 고려하여 연료와 산화제의 속도비와 혼합효율의 상관성을 고찰하였다. 분사공 직경이 증가됨에 따라 최대 혼합효율점이 운동량비가 증가되는 방향으로 이동함을 보였으며, 연료와 산화제의 속도 비 0.65~0.7영역에서 분사공 직경변화와 무관하게 혼합효율이 최대가 되었다. 또한 혼합효율은 추진제의 분사 충돌 시 상대제트의 침투 깊이 정도에 따라 큰 영향을 받는 것으로 나타났다.

• 대기
• /
• 제26권3호
• /
• pp.473-482
• /
• 2016

An accurate determination of turbulent fluxes over an urban area is a challenging task due to its morphological diversity and associated flow complexity. In this study, an eddy covariance (EC) method is applied over a highly heterogeneous urban area in a small city (Gongju), South Korea to investigate the quantitative influence of 'coordinate tilt' in determining the turbulent fluxes of sensible heat, latent heat, momentum, and carbon dioxide mass. Two widely-used coordinate transform methods are adopted and applied to eight directional sections centered on the site to analyze a 1-year period EC measurement obtained from the urban site: double rotation (DR) and planar fit (PF) transform. The results show that mean streamline planes determined by the PF method are distinguished from the sections, representing morphological heterogeneity of the site. The sectional pitch angles determined by the DR method also compare well with those in the PF method. Both the PF and DR methods show large variabilities in the determined streamline planes at each directional section, implying that flow patterns may form in a complicate way due to the surface heterogeneity. Resulting relative differences of the turbulent fluxes, defined by $(F_{DR}-F_{PF})/F_{DR}$, are found on average +13% in sensible heat flux, +21% in latent heat flux, +37% in momentum flux, and +26% in carbon dioxide mass flux, which are larger values than those reported previously for fairly homogeneous natural sites. The fractional differences depend significantly on wind direction, showing larger differences in northerly winds at the measurement site. It is also found that the relative fractional differences are negatively correlated with the mean wind speed at both stable/unstable atmospheric conditions. These results imply that EC turbulent fluxes determined over heterogeneous urban areas should be carefully interpreted with considering the uncertainty due to 'coordinate tilt' effect in their applications.

• 대한기계학회논문집
• /
• 제17권5호
• /
• pp.1294-1303
• /
• 1993

본 논문은 Lee의 평행평판 채널내의 난류유동 모델을 사용하여 비대칭적 경계 를 갖는 이중관내 거칠기 표면위에서의 흐름을 취급하였다. 해석에서 표면거칠기는 속도 형상에 단지 국부적으로 영향을 미친다고 가정하여 한쪽 면에서만 사각형 거칠기 요소를 가진 평행관 사이의 유동에 관해 이미 얻은 실험 관계식을 이용하였다. 거칠 기의 합성효과는 압력손실 증가에 대한 열전달 증가에 대해 거친관과 매끈한 관의 경우를 비교한 값에 의하여 알수 있었다.그러므로, 전체적 효율측면에서 유리하게 열전달률을 증가시킬수 있는 이중관내의 바람직한 인공의 거칠기형태(P/.epsilon., S/.epsilon.,.alpha., etc.)를 얻을 수 있었다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2005년도 제24회 춘계학술대회논문집
• /
• pp.155-158
• /
• 2005

The spray characteristics of liquid jet minted in subsonic cross-flow were investigated numerically and experimentally. The behaviors of column, penetration and breakup of plain liquid jet in non-swirling cross-flow of air have been studied. Numerical and physical models are based on a modified KIVAII code. The primary atomization is represented by a wave model based on the KH(Kelvin-Helmholtz) instability that is generated by a high interface relative velocity between the liquid and gas flows. CCD camera has been utilized in oder to capture the spray trajectory. The nozzle diameter was 0.5 mm and its L/D ratios were between 1 and 5. Numerical and experimental results indicate that the breakup point is delayed by increasing gas momentum ratio, the penetration decreases by increasing Weber number and the turbulent or nonturbulent liquid jet is obtained at different L/D ratio.

• 대한기계학회논문집B
• /
• 제20권5호
• /
• pp.1700-1716
• /
• 1996

The two-dimensional, unsteady, laminar conservation equations for mass, momentum, energy and species transport in the gas phase and mass, momentum and energy in the liquid phase are solved simultaneously in spherical coordinates in order to study heating and vaporization of a droplet entrained in the oscillating flow. The numerical solution gives the velocity and temperature distribution in both gas and liquid phase as a function of time. When the gas flow oscillates around an vaporizing droplet, the liquid flow circulates in the clockwise or counterclockwise direction and the temperature distribution in the liquid phase changes its shapes, depending on the gas fow direction. When the gas flow changes its direction of circulating liquid flow is opposite to the gas flow, forming two vortex circulating in the opposite direction. During the heating period, the difference in the maximum and minimum temperature is large, followed by the almost uniform temperature slightly below the boiling temperature. The mass and heat transfer from the droplet depend on the droplet temperature, droplet diameter and the magnitude of relative velocity, giving the droplet lifetime different from the d$^{2}$-law.

• 한국방재학회 논문집
• /
• 제8권4호
• /
• pp.47-52
• /
• 2008

Breakaway 단부장치 설계에 중요한 요소가 충돌 차량의 속도변화이다. 이는 충돌실험이나 3차원 유한요소 해석을 통해서 구할 수 있으나 에너지와 운동량 보존의 법칙을 이용하여 비교적 간단하게 계산할 수도 있다. 본 논문에서는 에너지와 운동량 보존의 법칙에 기초한 지주와 소형차 충돌 시 속도변화를 계산하는 식을 유도하였다. 이를 이용한 민감도 분석을 통하여 지주 단부의 분리하중, 파괴에너지, 차량의 강도 와 충돌속도가 소형지주에 충돌하는 차량의 속도변화에 미치는 영향을 파악하였다. 지주 단부가 기초에 고정된 정도를 나타내는 분리력 및 분리파괴에너지(Breakaway Fracture Energy)가 클수록 속도변화가 크고 충돌속도의 크기가 작을수록 속도변화가 크게 나타났다.

• 한국유체기계학회 논문집
• /
• 제16권2호
• /
• pp.15-20
• /
• 2013

An aero-acoustic performance analysis method of regenerative blower is developed as one of the FANDAS codes. The aerodynamic performance of regenerative blower is predicted by using momentum exchange theory coupled with pressure loss and leakage flow models. Based on the performance prediction results, the noise level and spectrum of regenerative blower are predicted by discrete frequency and broadband noise models. The combination of the performance and the noise prediction methods gives aero-acoustic performance map and noise spectrum analysis results, which are well-agreed with the actual measurement results within a few percent relative error.

• 한국군사과학기술학회지
• /
• 제7권4호
• /
• pp.138-145
• /
• 2004

Experimental study was conducted on cylindrical supersonic diffuser in order to investigate the effects of the ratios of diffuser area to nozzle throat area (Ad/At), diffuser area to nozzle exit area (Ad/Ae), nozzle exit area to its throat area (Ae/At), and diffuser length to its diameter (L/D), the free volume of vacuum chamber, and the relative distance between nozzle exit and diffuser inlet on the diffuser performance. The study showed that the minimum diffuser starting pressure (Po/Pa)st increased monotonically with increase in (Ad/At) as predicted by the normal shock and momentum theory models and the volume of vacuum chamber affected vacuum pressure level during diffuser operation at lower value of (Ad/Ae). The results of this investigation will be utilized in the design of real-scale high-altitude simulation test facility.

• 한국분무공학회지
• /
• 제15권4호
• /
• pp.170-176
• /
• 2010

This paper describes the grid-size dependency of the conventional Eulerian-Lagrangian method to spray characteristics such as spray penetration and SMD in modeling DME sprays. In addition, the reduction of the grid-size dependency of the present Gas-jet model was investigated. The calculations were performed using the KIVA code and the calculated results were compared to those of experimental result. The results showed that the conventional Eulerian-Laglangian model predicts shorter spray penetration for large cell because of inaccurate calculation of momentum exchange between liquid and gas phase. However, it was shown that the gas-jet model reduced grid-size dependency to spray penetration by calculating relative velocity between liquid and ambient gas based on gas jet velocity.

• Nuclear Engineering and Technology
• /
• 제56권2호
• /
• pp.444-450
• /
• 2024

Based on multiple measurements of ionization loss, the Time Projection Chamber (TPC) combines strong tracking ability with particle identification ability in a large momentum range, which is an important advantage of TPC detection technology over traditional ionization measurement technology. According to these two characteristics of TPC, applying it to the measurement of fission cross-section can greatly improve the measurement accuracy. During the measurement of the fission cross-section, the number of target nuclei is required to be accurately measured. So this paper introduces a method for measuring the number of ²³⁵U target nuclei using a fission TPC system. The measurement result agrees with the reference value, and relative error is around 1 %.