• International Journal of Highway Engineering
• /
• v.12 no.4
• /
• pp.203-209
• /
• 2010

The base asphalt mixtures that used the waste recycle asphalt correcting from the four different overlay construction sites in Seoul city were made using the foamed asphalt method. The sample mixtures were made in different ratio of the recycle asphalt and new asphalt material and the performance of the mixtures of the different ratio was investigated in the laboratory. The laboratory tests includes the Marshall test, the indirect tensile test, the resilient modulus test, the creep test and the wheel tracking test. The test of the recycle foamed asphalt mixtures(RFA) were compared with the those of the recycle hot mix asphalt(RHA) mixtures. The performance of the RFA is comparable to that of the RHA. On the other hand, the indirect tensile strength of the RFA in dry condition is lower than that of RHA and the indirect tensile strength of the RFA in wet condition is much lower than that of the RHA.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.15 no.1
• /
• pp.45-63
• /
• 2017

The oldest commercial reactor in South Korea, Kori-1 Nuclear Power Plant (NPP), will be shut down in 2017. Proper treatment for decommissioning wastes is one of the key factors to decommission a plant successfully. Particularly important is the recycling of clearance level or very low level radioactively contaminated metallic wastes, which contributes to waste minimization and the reduction of disposal volume. The aim of this study is to introduce a conceptual design of a recycle system and to evaluate the doses incurred through defined work flows. The various architecture diagrams were organized to define operational procedures and tasks. Potential exposure scenarios were selected in accordance with the recycle system, and the doses were evaluated with the RESRAD-RECYCLE computer code. By using this tool, the important scenarios and radionuclides as well as impacts of radionuclide characteristics and partitioning factors are analyzed. Moreover, dose analysis can be used to provide information on the necessary decontamination, radiation protection process, and allowable concentration limits for exposure scenarios.

• Journal of Korean Society on Water Environment
• /
• v.20 no.1
• /
• pp.42-47
• /
• 2004

This study was accomplished to develope an advanced wastewater treatment process using high MLSS in anoxic tank aimed to improve nutrient removal and to reduce wasting sludge. It was operated with 4 Modes with varing solid concentration and internal recycle ratios. Mode I, II, III was operated 1.0~1.5% MLSS concentration at anoxic tank with 50% sludge recycle rate, however, each internal recycle rate were 100%, 200%, 300% and Mode IV was operated 1.5~2.0% MLSS concentration at anoxic tank with 50% sludge recycle rate and 100% internal recycle rate. The COD removal efficiency didn't show any big difference from Mode I to IV. The average COD removal rate was over than 90%. The T-N removal rate was 73%, the highest rate in all mode. The 36% of SCOD is used for the denitrification and phosphorus release in the anoxic tank. Specific denitrification rate was 3.5mg $NO_3{^-}-N/g$ Mv/hr and denitrification time was 0.7hr. As MLSS concentration is higher in anoxic tank as denitrification time would be shorter. The T-P removal rate was average 70%. The phosphorus release accomplished from the anoxic tank because the anaerobic condition was prevalent in the anoxic due to the prompt completion of denitrification. Sludge production was 0.28 kgVSS/kg $BOD_{removed}$ under the 1.5% MLSS and 17 day SRT. It is prominent result which has 40% sludge reduce comparing with traditional activate sludge system.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.10a
• /
• pp.269-274
• /
• 2002

Recently, Recycling aggregates could be gained from the reconstruction works using recycle process and the study and research of recycle concretes developed concrete application methods. It could put some outcome of studies to practical use for concrete products. The methods of crushing waste concrete are going diverse. In this study, the fundamental experiments and recycling application is investigated and analyzed with use of recycling aggregate which made of mechanical crush and underwater electrical impact crush, and the difference between underwater electrical impact crush, mechanical crush and natural aggregates is studied.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.2319-2324
• /
• 2003

This paper addresses the optimal design of dividing wall distillation column which is rapidly applied in a variety of chemical processes over recent several years because of its high energy saving efficiency. A general dividing wall column model which can cope with the heat transfer through the dividing wall is developed using rigorous computer simulation. Based on the simulation model, the effects of the internal recycle flow distribution around the dividing wall and the heat transfer across the dividing wall on overall system performance are investigated. An improved method is suggested to utilize the heat transfer through the wall to optimal column design. The suggested method is compared with the existing method via. simulation study and shows more improved energy saving result. Several control strategies for the divided wall column are tested and the optimal control strategy is propose

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2001.11a
• /
• pp.235-239
• /
• 2001

In recent years, as Chemical Mechanical Planarization(CMP) has been routinely utilized in integrated circuit(IC) fabrication, the consumption of slurry, main consumable in a CMP process, is greatly increased. Thus the reprocess of CMP slurries has been actively considered in the industry to reduce cost-of-consumable (COC). The main purpose of this study was to recycle the used oxide slurry using filters as a new method. As a result, Ultra Fine(UF) Filter could distinguish silica from the used oxide slurry and Reverse Osmosis(RO) Filter could distinguish Deionized(DI) Water and chemistry from chemistry solution. The tetraethylorthosilicate removal rate was almost the same as the number of recycle polishing was increased, when it was modified by slightly adding new SS-12 slurry. The microscratch didnt found as the number of recycle polishing was increased.

• Journal of the Korean Society of Costume
• /
• v.39
• /
• pp.271-281
• /
• 1998

The purposes of this study were to deter-mine the dimensions of the housewives' cloth-ing behavior for the environmental protection and the identify the effective variables. The results of this study was intended to provide fundamental material for the establishment of clothing behavior guidelines for the environmental protection. This study was conducted by reference analysis and empirical study. To develop theoreti-cal framework study. To develop theoreti-cal framework of dimensions of environmental protection behavior, references concerned were analyzed. The results of reference analy-sis showed that the dimensions of environmental protection bahavior were resource and energy saving, sold waste reduction, resource reuse or recycle, and green product purchase. The dimensions of housewives' clothing behavior for environmental protection were identified by use of self-administered questionnaires. The results of enpirical study showed that the dimensions of clothing behavior for the environmental protection wre clothing resource reuse or recycle, clothing management resource saving, clothing consumption resource saving, green product purchase, and clothing management resource saving was the highest and that of resource reuse or recycle was the lowest. Environmental consciousness, taking environmental education or not, residing place, clothing seperate-collectiong at residing place were effective variables on clothing behavior for environmental protection.

• Journal of Environmental Science International
• /
• v.2 no.4
• /
• pp.299-310
• /
• 1993

This study was aimed to evaluate the effects of effluent recycling on the UASB reactor performances at the various organic loading rates and influent substrate concentrations. The organic removal efficiency of the reactors operated with effluent recycle were above 85%. However, the efficiencies of the reactors operated without the recycle were below 40% even though the effort to increase the efficiencies was made by changing the influent substrate concentrations and the organic loading rates, and introducing the effluent recycle at the final stage of the experiment. It was realized that the certain amount of effluent recycling from the start-up stage in UASB reactors seemed to be necessary to provide the effective contact chances between the substrate and granular sludge for better performances of the UASB process.

• Journal of Energy Engineering
• /
• v.8 no.1
• /
• pp.85-94
• /
• 1999

전력연구원에서 수행 중인 7 kW 용융탄산염형 연료전지 시스템의 운전 조건과 일치하는 모델을 in-Line FORTRAN 블록을 이용하여 상용 소프트웨어인 ASPEN PLUS로 전산 모사한 결과와 가스 크로마토그래피를 이용하여 분석한 실험적인 값을 비교 분석한 결과 실험치와 거의 일치함을 보였다. 향후 대형 시스템에서 사용하게될 가스 recycle을 위해서 연료극, 공기극의 가스를 recycle할 때와 연료극 가스를 catalytic burner를 이용하여 recycle하였을 때 연료의 전체적인 시스템의 효율 변화를 살펴보았다. 이러한 결과는 용융탄산염 연료전지 대형 시스템의 설계에 중요한 자료가 될 것이다.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.05a
• /
• pp.693-698
• /
• 2002

The production accounts of domestic by-product is increased after 1990's. It is worried about the life reduction of dump land, as dump land's capacity have reached to limitation and the amount of construction industrial wastes is going higher. Recently, recycling aggregates could be gained from the reconstruction works using recycle process. And the study and research of recycle concretes developed concrete application methods. It could put some outcome of studies to practical use for concrete products. The methods of crushing waste concrete are going diverse. In this study, the fundamental experiments and recycling application is investigated and analyzed with use of recycling aggregate which made of mechanical crush and underwater electrical impact crush. and the difference between underwater electrical impact crush, mechanical crush and natural aggregates is studied.