• Journal of Korea Multimedia Society
• /
• v.12 no.11
• /
• pp.1581-1592
• /
• 2009

Recently, we can hear various kinds of music in everywhere and anytime. If a user wants to find the music which was heard before in a street or cafe, but he does not know the title of the music, it is difficult to find it. That is the limitation of previous retrieval system of music data. To overcome these problems, we research a method of content-based retrieval of music data based on the recorded humming, the part of recorded music and the played musical instrument. In this paper, we investigated previous content-based retrieval methods of papers, systems and patents. Based on that, we research a method of content-based retrieval of music data. That is, in case of using the recorded humming and music for query, we extract the frequency information from the recorded humming/music and the stored music data by using FFT. We use a MIDI file in case of query by the played musical instrument. And by using dynamic programming matching, the error caused by the disparity of length between the input source with the stored music data could be reduced.

• Journal of the Korean Geophysical Society
• /
• v.8 no.2
• /
• pp.81-87
• /
• 2005

Acquisition and processing of vector seismic waves were conducted through simultaneous generation of P, SH, and SV waves and receiving those waves using three-component geophones. Test data were received by 24 8-Hz geophones at an interval of 2 m along a 94-m profile. The data were recorded for 512 ms with sampling intervals of 0.2 ms. Raw data indicate that both reflected and refracted P waves are strongly recorded on the vertical component while SH waves are significant on the transverse horizontal component. On the inline horizontal component, both direct P and converted PS waves are recorded. First arrivals of P and SH waves were detected simultaneously on the vertical and transverse horizontal axes, respectively. The recorded vector data were separately inverted using traveltime tomography to yield P- and SH-wave sections. Using those two velocity sections, Poisson's ratios were able to be obtained effectively.

• Journal of the military operations research society of Korea
• /
• v.9 no.2
• /
• pp.45-55
• /
• 1983

Film data photographed by Motor Drive Camera were gathered and recorded in the FM Tape Recorder via computer-aided Location Analyzer and Voltage Generator. The recorded analogue data are converted into digital voltage values corresponding to the location of 14 landmarks by Analog-to-Digital Converter attached to digital computer. Using these converted values, the human motions were reproduced by CalComp Plotter and computer screen. This author concludes that any human motions can be analyzed by computer and we can find some methods of improvements of motions in work places, sports science, or operations of military equipments.

• Journal of Korea Water Resources Association
• /
• v.45 no.1
• /
• pp.91-99
• /
• 2012

In this study, it was proposed that extension techniques of 8 day interval recorded stream-flow data which has been produced at the mouth of unit watersheds for TMDLs to daily one. The concept of this method was that the missing data at partial recording station was filled by using the daily data at a nearby, hydrologically similar streamgaging station. First, same day stream-flow was extracted from the daily stream-flow. Then, the extension equation was developed based on the sample data when the same day stream-flow from daily data and the partially recorded stream-flow was deeply related each other. The missing data was interpolated or extrapolated by the equation. Especially the maintenance of variance extension (MOVE) technique was used to derive the equation and was validated. Finally the 8-day interval recorded stream-flow at the mouth of unit watersheds in Han River Basin for TMDLs was extended to continuously daily data by using the method proposed in this study. And the low flow at each unit watershed was evaluated according to the flow-duration curve.

• 정보저장시스템학회:학술대회논문집
• /
• 2005.10a
• /
• pp.139-144
• /
• 2005

Because of the photorefractive recording dynamics, each newly recorded hologram partially erases all previously stored image. Thus achieving the desired diffraction efficiency profile for the entire sequence after all images have been recorded requires exposure time schedule. The often cited classical exposure-schedule model predicts a rising-exponential build-up and an exponential decay in An with an exposure time. However because we cannot directly measure the An, it's difficult to establish the relation of both. In this paper, we deduce the relation of diffraction efficiency and exposure time from experiment data and suggest an algorithm to make time schedule profile in angle/fractal multiplexing of holographic data storage. After that, we present simulated result with equal hologram diffraction efficiency for a sequence of 250 holograms recorded by angle/fractal multiplexing.

• Proceedings of the KIEE Conference
• /
• 2000.11a
• /
• pp.152-155
• /
• 2000

This paper deals with the PSS modelling of Ulchin N/P Unit #1 by utilizing the recorded data from AVR step test. In addition to it, the recorded results obtained from the AVR step test with PSS running and without PSS running are not only compared each other on the time domain but they are also analyzed with FFT on the frequency domain; the desirable effect of running PSS in Ulchin N/P Unit #1 is examined. Finally, the derived PSS model parameters lead to good matches between simulation results and recorded data.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.50 no.8
• /
• pp.351-358
• /
• 2001

This paper deals with the PSS modeling of Ulchin N/P #1 as well as the generator and excitation system modeling by utilizing the recorded data from AVR step test, which has been performed by entering small voltage signal into the AVR summing point. In addition to it. two recorded results obtained from the AVR step test with PSS sunning and without PSS running have not only been compared each other on the time domain, but also they heve been analyzed with FFT analysis on the frequency domain; thus, the desirable effects of running PSS in Ulchin N/P #1 on power system have been explicitly confirmed. Finally, the derived PSS model parameters lead to good matches between simulation results and recorded data.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.353-362
• /
• 2008

Operation data and fault data are recorded at the TCMS(Train Control and Monitoring System) of train are very important record for repairs and inspection of train. there are two ways to transfer the data today. one is using memory card and the other is using wireless communications. This paper is proposed about TCMS wireless depot analytical equipment that transfers data recorded in train to depot equipment via wireless method. The TCMS wireless depot equipment configuration is an AP(Access Point) and a central server PC at depot equipment. This method has the advantage of decrease of personnel expenses, collection time and convenience of staffs. This paper is verified about the utility of use, efficient establishment position of an AP at depot, the safety of data receiving, the exactitude of data and the shortening of transmission time. and this equipment is now operating at shin-jeong depot of SeoulMetro.

• Journal of the Optical Society of Korea
• /
• v.13 no.4
• /
• pp.456-463
• /
• 2009

We introduce a holographic data storage system for intermediating between small data sets and mass holographic data recording. It employs a holographic sequentially superimposed recording technique. We discuss a time scheduling technique for making uniform reconstruction of sequentially recorded holograms and we show experimental results. We also discuss the Bragg selectivity of sequentially recorded holograms. The maximum storage density of our system is estimated to be 224kbit/$mm^2$. Our system is useful as an intermediate recording system before recording mass holographic data in a larger system.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.25 no.1
• /
• pp.27-38
• /
• 1995

The organ or tissue doses were determined with head and neck phantom measurement for multiple axial scans (36 slices), multiple coronal scans (13 slices), 3 types of single axial scans(orbit, maxillary sinus and mandibular canal) and single coronal scan (maxillary sinus). For each scan sequence 30 TLDs were placed in selected sites(16 internal sites and 14 external sites) in a tissue-equivalent phantom. The exposure was made at 120kVp, 500mAs with 5 mm slice width. The results were as follows : 1. In multiple axial scans, the greatest effective dose recorded was that delivered to the thyroid glands(2.77 mSv) and the least was that received by the skin(0.05 mSv). From these data, stochastic effects were 202.2x10/sup -6/ and 3.7×10/sup -6/, respectively. 2. In multiple coronal scans, the greatest effective dose recorded was that delivered to the salivary glands(0.58 mSv) and the least was that received by the skin(0.01 mSv). From these data, stochastic effects were 42.2×10/sup -6/ and 0.7×10/sup -6/, repectively. 3. Among single axial scans, the greatest effective dose recorded was that delivered to the salivary gland(0.38 mSv) in maxillary sinus scan. From this data, stochastic effect was 27.7×10/sup -6/. 4. In single coronal scan, the greatest effective dose recorded was that delivered to the salivary gland(0.01 mSv). From this data, stochastic effect was 1.0×10/sup -6/. 5. The equivalent dose measured that delivered to the lens of the eyes was 69.64 mSv in multiple axial scan, 39.32 mSv in multiple coronal scan and 36.77 mSv in single axial scan(orbit).