• 정보저장시스템학회논문집
• /
• 제3권4호
• /
• pp.183-190
• /
• 2007

In most hard disk drives that apply the ramp load/unload technology, the head is unloaded at the outer edge of the disk while the disk is rotating. During the unloading process, slider-disk contacts may occur by lift-off force and rebound of the slider. The main issue of this paper is to prevent the slider-disk contact by rebound, and we apply a disk bump to the unloading process. To do so, first, the ranges of bump dimension are determined. Second, the stability of each bump is checked by dynamic simulation. Finally, unload simulations are performed for stable bump designs. As a result of these steps, the effect of the bump design and the position for the unloading performance were investigated. As a consequence, we propose the optimal bump design to improve the unloading performance. Furthermore, we can identify to remove rebound contact by applying a bump on disk during the unloading process.

• 한국운동역학회지
• /
• 제17권3호
• /
• pp.23-29
• /
• 2007

The purpose of this study were to investigate the differences between female and male basketball players in knee neuromuscular biomechanical factors during basketball rebound jump. Twelve high school female ($17.9{\pm}0.8years$) and twelve male ($19.0{\pm}1.6years$) basketball players rebound jumped for maximal vertical height to sufficiently stress the anterior cruciate ligament. Kinematic and ground reaction data were collected and combined with inverse dynamics to estimate the knee extensor and abductor torque. The EMG data from the biceps femoris and rectus femoris was used to estimate the ratio of quadriceps muscle activity. Female athletes showed more reduced knee flexion at foot contact, more increased knee abduction, extensor and abductor knee joint torque at foot contact, and quadriceps ratio at stance phase than those of male athletes. In conclusion, Female athletes showed differences in knee neuromuscular biomechanical factors than male athletes during basketball rebound jump.

• Architectural research
• /
• 제20권4호
• /
• pp.137-145
• /
• 2018

The nondestructive test is widely used in the field of diagnosis and maintenance to evaluate the degree of damaging of structures caused by aging, and the demand for this test method is expected to continue increasing. However, there is a lack of standards related to the nondestructive test, and South Korea is relying heavily on developed nations for original technologies related to diagnosis. It is an urgent task to establish a nondestructive test method appropriate for the circumstance of South Korea. The purpose of this study is to compare and analyze estimated error of compressive strength in single-story structures comprised of vertical and horizontal reinforced concrete members using the impact testing method and rebound hardness method, which are nondestructive test methods, and to review on-site applicability of these methods. Based on compressive strength of the structures estimated, overall mean error was 21.2% for the impact testing method and 15.6% for the rebound hardness method. The necessity of a reliable diagnostic method based on compound nondestructive test methods to increase accuracy of estimation was confirmed.

• 한방안이비인후피부과학회지
• /
• 제34권1호
• /
• pp.101-111
• /
• 2021

Objectives : Steroids are often administered to atopic patients as hormone preparations, often causing side effects. This study is intended to present the possibility of Korean medicine treatment for patients who have had side effects due to steroids in atopic dermatitis by relieving side effects and improving symptoms through Korean medicine such as Hwangryounhaedok-tang and Siryeong-tang. Methods : 2 patients who had atopic dermatitis and rebound phenomenon after steroids treatment were treated by herbal medicine, herbal acupuncture, acupuncture and external preparations. Photographs of the lesions, SCORAD(Scoring atopic dermatitis) index were used to evaluate the changes in symptoms. Results : The SCORAD index of the first patient improved from 55.6 to 24.3 in 4 months. The SCORAD index of the second patient improved from 44.7 to 21.3 in 3 months. Conclusions : In the situation where symptoms of atopic dermatitis patients due to steroid rebound phenomenon have worsened, Korean medicine treatments played a important role in alleviating symptoms and improving SCORAD index scores.

• 대한토목학회논문집
• /
• 제32권6D호
• /
• pp.615-622
• /
• 2012

숏크리트는 현장에서 빠른 시공을 실시하여 굴착면을 침식으로부터 보호하고 암괴의 전단이동방지, 암괴의 붕괴방지, 개구절리의 봉합, 응력의 집중완화, 응력전달효과 등에 의하여 후속작업의 원활한 진행이 될 수 있도록 굴착면을 방지하여 지내력을 증대시키는 것이 주목적이다. 숏크리트공법으로는 건식과 습식의 두 가지방법이 있으며, 1997년 이후부터는 건식보다 습식 숏크리트가 많이 이용되고 있다. 그러나 작업 중 목적물에 부착되지 않고 반발되는 현상, 즉 리바운드가 많이 발생하며 이러한 많은 양의 리바운드는 숏크리트와 전체 공사비 원가에 중대한 영향을 미치게 된다. 특히 숏크리트는 재료비, 배합, 타설시간 증가, 재료의 취급과 계량장치에 소요되는 인력 및 버력제거를 위한 비용 증가 발생원인이 되고 있다. 이 연구에서는 국내현장에서 시행한 급결제 함유량에 따른 일반 습식 숏크리트 및 강섬유 습식 숏크리트공법의 시공실적을 분석하여 반발 양 및 강도의 실험적인 분석을 실시하였다. 또한 국내 건설공사에 실제 사용할 수 있는 효과적이고 합리적인 방법을 제시하였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제12권1호
• /
• pp.193-202
• /
• 2008

본 논문은 분사식 FRP의 압축 구속효과와 휨 보강 효과 및 분사식 FRP의 반발률에 대한 실험적 연구이다. 분사식 FRP란 레진과 짧게 잘려진 섬유를 고압의 공기에 의해 적용면에 분사하여 보강하는 기법이다. 분사식 FRP의 구속 및 휨 보강 효과를 알아보기 위하여 원주형 공시체와 휨 공시체를 제작하여 FRP를 분사하여 보강하였고, 보강 재료로 유리섬유와 폴리에스테르 수지를 사용하였다. 최적의 보강 조건을 알기 위해 섬유 길이, 보강 두께, 섬유 혼입비, 콘크리트 강도에 따른 실험을 실시하였고, 분사식 FRP 보강법을 섬유 매트에 의한 보강법과 비교하였다. 또한, 분사식 FRP의 반발률 역시 평가하였다. 실험을 통하여 분사식 FRP의 최적 조건을 결정하였다. 본 연구의 분사식 FRP 보강은 유리 섬유 매트에 의한 보강법 이상의 성능을 발휘하였다.

• 한국가스학회지
• /
• 제21권3호
• /
• pp.26-32
• /
• 2017

LNG 저장탱크의 외조 콘크리트는 방호벽 기능을 하는 프리스트레스 콘크리트 구조물이다. 콘크리트 구조물이 열화가 되어 안전성이 확보되지 않는 경우 구조물 붕괴 등의 위험성이 존재하게 된다. 정밀안전진단시 비파괴검사로 반발경도 및 초음파 속도 측정을 통해 구조물의 안전성과 직접적으로 관련되어 있는 콘크리트 압축강도를 추정식으로 예측할 수 있다. 그러나, LNG 저장탱크는 비파괴검사 데이터와 실제 압축강도에 대한 추정식이 부재하다. 이 연구는 LNG 저장탱크에 대해 보다 정확한 실제 강도를 측정하기 위해 Pilot LNG 저장탱크벽체로부터 코어를 채취하였다. 코어를 채취하기 전 해당위치에 일반적인 비파괴시험 방법인 반발경도 검사를 4개의 다른 영역에 각 3군데 위치에서 이루어졌다. 채취한 콘크리트 코어에 대해 압축강도 시험결과의 실제 압축강도 데이터와 반발경도 데이터를 이용하여 LNG 저장탱크의 압축강도 추정식을 개발하였다.

• 한국지형학회지
• /
• 제26권1호
• /
• pp.41-57
• /
• 2019

The grain size characteristics of river sediments and the characteristics of bedrock were investigated for the 24km section of the Dong River upstream of the Han River. The bedrock of the study area is various limestone belonging to the Paleozoic Choseon limestone group, and Mesozoic sandstone and conglomerate occur in some areas. Most of the river channel is made of limestone, and most of the river bottom is covered with fluvial sediments. More than 70% of these sediments are sandstone and conglomerate, rather than limestone which forms the basis of the valley. Sediment particles seem to have been supplied upstream of the study area rather supplied from the slope near of the channel. It is difficult to find the statistically significant difference in the shape of the sediment particles of limestones and non-limestones. However, limestones has platy forms rather than block forms, it can be assumed that the limestone was supplied from the surrounding valley wall and transported over a short distance. The particle sizes of DG1~DG2(the upstream section) are decreasing in the downstream direction. However, at DG3, which is a tributary, Jijangcheon, confluence particle size increases and at DG4 particle size increases more. In the case of DG4, it may be influenced by the influx of tributaries, but it also can be supposed as the impact of the large flood in 2002. In the downstream parts(DG5~DG7), the particle size decreases exponentially with distance. The rebound strength of stream sediments and bedrock was measured by using Schmidt hammer. Limestone showed lower rebound strength than non-limestone. According to the results of the sediment and bedrock, it can be seen that the sandstone and conglomerate with high rebound values pass through valley with the relatively low strength limestone. The sediments of limestone were decreased in grain size more rapidly than those of limestone sediments.

• 중환자간호학회지
• /
• 제16권3호
• /
• pp.99-108
• /
• 2023

Purpose : This retrospective study aims to provide basic data for intervention to improve clinical outcomes and identify the characteristics of the rebound hyperthermia (RHG) and non-rebound hyperthermia (NRHG) groups by checking body temperature in patients with post-cardiac arrest syndrome. Method : The study involved 118 patients who completed target temperature management (TTM) in an acute-care unit. Data were analyzed for frequency, percentages, mean, standard deviation, median, and quartiles, and compared using the chi-squared test and Mann-Whitney U-test. Results : Rebound hyperthermia (RH) was observed in 74 (62.7%) patients, predominantly male (69.5%), with an average age of 64.54 ± 15.98, and a body mass index of 23.22 ± 4.75kg/m² (overweight). Hypertension (50%) was the most common co-morbidity, followed by diabetes and heart disease (33.1%). Neuron-specific enolase levels were higher in the NRHG 24, 48, and 72 hours after recovery of spontaneous circulation (p = .037, p < .001, p = .008). The APHCHE IV was also higher in the NRHG (p < .001). RH occurred 25.49 (7.28-52.96) hours after TTM completion, lasting for 2 (1-3) hours. Temperature reduction strategies included notifying doctors, administering antipyretics, and nursing intervention, with the latter being the most common at 94.6%. Half of the subjects in the RHG and 77.3% in the NRHG fell into cerebral performance categories 3, 4, and 5 (p = .003). Conclusion : RH is more likely a body mechanism related to CPR and TTM than a result of pathogenic infection. Therefore, we require an active intervention for hyperthermia, and a patient-specific nursing intervention protocol.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2067-2072
• /
• 2007

Understanding of the impinging behavior of an electrically charged spray is essential in determining appropriate operating conditions for electro-spraying of paints, surface coating materials and insecticides. In the present work, as an initial step, the wall impact of an electrically charged droplet has been experimentally investigated. The charged drops were directed on the surface of a paraffin wax, and the impinging behavior was visualized and recorded using a CCD camera to identify the impingement regime. The spread-rebound boundary for the charged drop turned out to be smaller compared to that for an electrically neutral droplet under the same surface condition. The shift of the transition criterion is considered to be due to the discrepancy between the maximum spread ratio of the electrically charged droplet and that of the neutral droplet.