• Proceedings of the KIEE Conference
• /
• 2002.11d
• /
• pp.106-108
• /
• 2002

Capacitive current switching test for circuit breaker and load breaker switch requires special attention because, after current interruption, the capacitive load contains an electrical charge and can cause dielectric restrike and re-ignition of the switching devices. therefore dielectric strength of capacitor load bank shall be able to withstand 4Vt (Vt : test voltage) and charging voltage discharged within 1 min. In this paper presents both characteristic of capacitive current switching tests and design of capacitor load bank.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.130-130
• /
• 2004

본 논문에서는 RF 스위치의 엑추에이터로 사용하기 위한 수평구동형 박막형 PZT 엑추에이터의 설계, 제작 및 시험에 관한 것이다 기존의 RF 스위치들은 대부분 수직 방향의 접촉 방식을 채택하고 있고, 대부분 구조체가 두껍지 않은 막으로 이루어져 있어서, 엑추에이터로부터 힘을 충분히 전달받지 못한다. 이로 인해, 접촉력이 상대적으로 작게 되어, 접촉저항을 줄이기 위한 접촉압력을 내기 위해 접촉 면적을 줄일 수밖에 없게 된다. 따라서, 본 연구에서는 효과적인 힘의 전달이 가능한 수평방향의 접촉 방식과 상대적으로 큰 힘을 낼 수 있는 PZT 엑추에이터를 사용하고자 한다.(중략)

• Proceedings of the KSR Conference
• /
• 2001.05a
• /
• pp.162-169
• /
• 2001

There are many EMU lines in korea. But only one type has been applied to passenger side door. This type is so called "Pocket sliding type". This type has some week points. To begin with, it is not good for decreasing the noisy form the outside of carbody. And the second time, if some obstacles are put between sliding door, only driver can operate re-open door switch manually ill driver's cab. This type is so dangerous for passengers. So many people want to the new door type that have no defect. KRRI joined forces with ANT corporation for pneumatic plug door system. This type will be good for decreasing the noisy, passenger′s safe. The project was started at the last year on November and will be finished on June, this year In this paper, we will deal with the role of cylinder, planetary gear, door control unit, dynamic mechanism, and the report of FEM, type test. This paper will contribute to tile electric motor control plug door system.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.1251-1256
• /
• 2008

Urban railway system has make rapid progress ever since Seoul metro line No.1 was opened in 1974. Now, it is time to prepare system maintenance scheme and procedure that can be available even after 30 years from now. Especially, signaling system must be chosen with considering its life cycle since the system is categorized into electronic equipments. As for current signaling system, mechanical components such as relays has decreased while communication and S/W has integrated in order to implement its correct function. Therefore, it is required to establish system review and switch-over scheme with considering operational environment, maintenance system and an operator. In this paper, therefore, we analyzed various factors - technical, operational and economic - that have effect on system improvement so as to prevent making any mistakes on system improvement.

• International Journal of Computer Science & Network Security
• /
• v.23 no.3
• /
• pp.81-93
• /
• 2023

The popularity of short-form video platforms like TikTok has increased recently. Short-form videos are significantly shorter than traditional videos, and viewers regularly switch between different types of content to watch. Therefore, a successful prefetching strategy is essential for this novel type of video. This study provides a resource-effective prefetching technique for streaming short-form videos. The suggested solution dynamically adjusts the quantity of prefetched video data based on user viewing habits and network traffic conditions. The results of the experiments demonstrate that, in comparison to baseline approaches, our method may reduce data waste by 21% to 83%, start-up latency by 50% to 99%, and the total time of Re-buffering by 90% to 99%.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.6
• /
• pp.553-559
• /
• 2015

The purpose of this research is to develop a gait assistive device to enhance the gait stability and training efficiency of stroke patients. The configuration of this device is mainly composed of a motored wheel and a single cane whose lower end is attached to a motored wheel frame. A patient can feel haptic information from continuous ground contact from the wheel while walking through the grip handle. In addition, the wheeled cane can avoid using excessive use of the patient's upper limb for weight support and motivate the patient to use a paralyzed lower limb more actively. Moreover, the proposed device can provide intuitive and safe user interaction by integrating a force sensor and a tilt sensor equipped to the cane frame, and a switch sensor at the cane's handle. The admittance control has been implemented for the patient to change the walking speed intuitively by using the interaction forces at the handle. A hemi-paretic stroke patient participated in the walking assistive experiments as a pilot study to verify the effectiveness of the proposed haptic cane system. The results showed that the patient could improve walking speed and muscle activations during walking with a constant speed mode of the haptic cane. Moreover, the patient could maintain the preferred walking speeds and gait stability regardless of the magnitude of resistance forces with the admittance control mode of the haptic cane. The proposed robotic gait assistive device with a simple and intuitive mechanism can provide efficient gait training modes to stroke patients with high possibilities of widespread utilizations.

• ETRI Journal
• /
• v.41 no.6
• /
• pp.715-730
• /
• 2019

We propose a switched beam-forming antenna that satisfies not only ultra-wideband characteristics but also beam-forming in the WLAN frequency band using an ultra-wideband antenna and passive parasitic elements applying a broadband optimal reactance load algorithm. We design a power and phase estimation function and an error correction function by re-analyzing and normalizing all the components of the parasitic array using control system engineering. The proposed antenna is compared with an antenna with a pin diode and reactance load value, respectively. The pin diode is located between the passive parasitic elements and ground plane. An antenna beam can be formed in eight directions according to the pin diode ON (reflector)/OFF (director) state. The antenna with a reactance load value achieves a better VSWR and gain than the antenna with a pin diode. We confirm that a beam is formed in eight directions owing to the RF switch operation, and the measured peak gain is 7 dBi at 2.45 GHz and 10 dBi at 5.8 GHz.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.1A
• /
• pp.7-16
• /
• 2003

Handover is very important to support the mobility of user because wireless ATM networks have smaller cell size such as micro/pico cell for broadband mobile multimedia service In this paper, we propose dynamic path reservation handover scheme for fast inter-MSC (Mobile Switching Center) handovers To reduce the handover delay for connection re-routing, the proposed scheme reserves virtual channels from nearest common node to neighbor MSC in advance Especially, our handover scheme predicts the number of inter-MSC handover calls at each period by the prediction algorithm and reserve virtual channels The simulation and analysis results show that our scheme reduce handover complexity and has higher reservation channel utilization, compared with DVCT scheme.

• Tribology and Lubricants
• /
• v.35 no.4
• /
• pp.244-266
• /
• 2019

The purpose of this study is to estimate the wear volumes of engine journal bearings operating at variable angular velocity of a shaft in the beginning of firing start-up cycle. To do this, first we find the potential region of wear scar on engine journal bearings where the applied bearing load and crank shaft velocity are variable. The potential wear regions are discovered by finding minimum oil film thickness at every crank angle existing below most oil film thickness scaring wear (MOFTSW) obtained based on the concept of the centerline average surface roughness. Then we calculate the wear volume from the wear depth and two wear angles decided by the magnitude of each film thickness lower than MOFTSW at every crank angle. The results show that the expected wear region is located at a few bearing angles after and/or behind the upper center of a big-end bearing and the lower center of a main bearing. And the real wear region is similar to the estimated wear region. Further we find that the wear scar on an engine journal bearing may occur at re-starting time after switch-off of a start motor especially under the condition of high oil temperature.

• The Journal of the Korea Contents Association
• /
• v.20 no.11
• /
• pp.204-215
• /
• 2020

We analyze changes of consumption behavior for bundle services for the latest three years focusing on comparing the detailed service types and service providers to understand competition structure in the market. Our major findings and implications are as follows. First, the mobile telecommunication service is certainly deemed to be a major selection criteria for bundling service provider, therefore the leading company in the mobile telecommunication has become more significant market power. Second, IPTV has an important influence for slection of bundling service provider, lately in some cases, rather than broadband Internet. Third, the individual services affecting the selection of bundling service providers clearly showed differentiation among three operators as a mobile telecommunication service of SK Group, a broadband Internet of KT, and an IPTV of LGU+. In addition, the importance of individual services in securing subscribers has been increased as the preference factors to switch a service provider were synchronized with the decision of major bundling service provider. Finally, although it is difficult to find customers' lock-In due to the latest change of their intentions to switch a provider, we find it is continuously necessary to monitor customers' lock-in as there are more long-term customers with re-contracts. Our results provide the policy implications based on the change of competition structure and usage behavior in the bundle market which is not evaluated the competiton situation.