• Journal of the Korea Institute of Military Science and Technology
• /
• v.24 no.5
• /
• pp.475-481
• /
• 2021

The on-board processor of satellite Synthetic Aperture Radar(SAR) digitizes the back-scattered echoes and transmits them to the ground. As satellite SAR image of various operating conditions including broadband and high resolution is required, an enormous amount of SAR data is generated. Decimation filter is used for data compression to improve the transmission efficiency of these data. Decimation filter is implemented with the FIR(Finite Impulse Response) filter and here, the decimation ratio and tap length are constrained by resource requirements of FPGA used for implementation. This paper suggests to use a non-integer ratio decimation filter in order to optimize the data transmission efficiency. Also, it proposes a filter design method that remarkably reduces the resource constraints of the FPGA in-use via applying a polyphase filter structure. The required resources for implementing the proposed filter is analysed in this paper.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2014.11a
• /
• pp.197-199
• /
• 2014

현재 MPEG에서 표준화 중인 IVC(Internet Video Coding)에서는 기존의 비디오 부호화 표준과 같이 Lagrange 계수 기반의 율-왜곡 최적화(RDO: Rate-Distortion Optimization)를 사용하여 최적의 부호화 모드를 결정하고 있다. RDO를 위하여 픽쳐 타입과 부호화 구조에 따라 미리 결정된 Lagrange 계수가 선택적으로 사용되고 있다. 한편 IVC에서는 저지연 모드 부호화 구조에서 비참조 P 프레임 부호화 기법을 선택적으로 사용하여 상당한 부호화 성능을 얻고 있다. 하지만 Lagrange 계수 선택에서 기존의 P 프레임과는 다른 비참조 P 프레임의 RD 특성이 반영되고 있지 않다. 본 논문에서는 비참조 P 프레임의 RD 특성을 고려하여 기존의 기법을 확장한 새로운 Lagrange 계수 선택 기법을 제안한다. 실험결과 제안기법은 IVC 시험모델 ITM 10.0에서 기존 기법 대비 0.4%의 비트율 감소를 얻을 수 있음을 확인하였다.

• Korean Journal of Optics and Photonics
• /
• v.6 no.1
• /
• pp.1-7
• /
• 1995

A IR zoom telescope system was designed for thermal imagery. The magnification is 4-14 and the focal length of eye piece is 25 mm. First, the frame was built up with first order optics and started design with 3rd order optics. There after, we can get the final design by optimization technique through finite ray tracing. The optical system was optimized with ray aberration or angular aberration including higer orders. Finally, The performance of the optical system was accessed by calculating the diffraction MTF from the design data. data.

• Journal of the Society of Naval Architects of Korea
• /
• v.51 no.5
• /
• pp.362-368
• /
• 2014

Container vessel sizes have constantly increased over the past two decades. With increasing ship sizes and higher container loading capacities, the adoption of lashing bridges has also increased. Today's lashing bridge designs range from 1st tier to 3rd tier lashing bridges. Container securing program of the past which is based on two lashing rods and 1st tier lashing bridge has to be improved to be suitable for the present time. The equilibrium equations in this study are established to cover the application of 3~4 lashing rods and 2nd~3rd tier lashing bridges. In addition developed program is improved to be able to calculate the reaction forces and optimum arrangement under the external lashing. An optimization algorithm which is suitable for the container securing problems involved the equality constraint has been also adopted in this study.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2021.06a
• /
• pp.81-84
• /
• 2021

In this paper, a rate-distortion optimization (RDO) model is proposed to find the joint bit allocation of geometry data and color data based on geometry-based point cloud compression (G-PCC) of Moving Picture Experts Group (MPEG). The mechanism of the method is to construct the RD models for geometry and color data through the training process. Afterward, two rate-distortion (RD) models are integrated as well as the decision of the parameter λ to obtain the final RDO model. The experimental results show that the proposed method can decrease 20% of the geometry Bjøntegaard delta bit rate and increase 37% of the color Bjøntegaard delta bit rate compared to the MPEG G-PCC TMC13v12.0 software.

• Journal of Korean Institute of Industrial Engineers
• /
• v.34 no.1
• /
• pp.49-56
• /
• 2008

Reliability has been considered as an important design measure in various industrial systems. We discuss a reliability optimization problem with component choices (ROP-CC) subject to a budget constraint. This problem has been known as a NP-hard problem in the reliability design fields. Several researchers have been working to find the optimal solution through different heuristic methods. In this paper, we describe our development of simulated annealing (SA) and tabu search (TS) algorithms and a reoptimization procedure of the two algorithms for solving the problem. Experimental results for some examples are shown to evaluate the performance of these methods. We compare the results with the solutions of a previous study which used ant system (AS) and the global optimal solution of each example obtained through an optimization package, CPLEX 9.1. The computational results indicate that the developed algorithms outperform the previous results.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.14 no.1
• /
• pp.153-158
• /
• 2006

To optimize the combustion system in a HSDI diesel engine, a new analysis technology was developed. The in-cylinder 3-D combustion analysis was carried out by the modified KIVA-3V, and the spray characteristics for the high pressure injection system were analyzed by HYDSIM. The combustion design parameters were optimized by coupling the KIVA-3V and the iSIGHT. The optimization procedure consists of 3 steps. The $1^{st}$ step is the sampling method by the Design of Experiment(DOE), the $2^{nd}$ step is the approximation using the Neural Network method, and the $3^{rd}$ step is the optimization using the Genetic Algorithm. The developed procedures have been approved as very effective and reliable, and the computational results agree well with the experimental data. The analysis results show that the optimized combustion system in a HSDI diesel engine is capable of reducing NOx and Soot emissions simultaneously keeping a same level of the fuel consumption(BSFC).

• Journal of Broadcast Engineering
• /
• v.9 no.1
• /
• pp.17-31
• /
• 2004

This paper proposes an algorithm for the robust transmission of video in error Prone environment using multiple description codingby optimal split of DCT coefficients and rate-distortionoptimization framework. In MDC, a source signal is split Into several coded streams, which is called descriptions, and each description is transmitted to the decoder through different channel. Between descriptions, structured correlations are introduced at the encoder, and the decoder exploits this correlation to reconstruct the original signal even if some descriptions are missing. It has been shown that the MDC is more resilient than the singe description coding(SDC) against severe packet loss ratecondition. But the excessive redundancy in MDC, i.e., the correlation between the descriptions, degrades the RD performance under low PLR condition. To overcome this Problem of MDC, we propose a hybrid MDC method that controls the SDC/MDC switching according to channel condition. For example, the SDC is used for coding efficiency at low PLR condition and the MDC is used for the error resilience at high PLR condition. To control the SDC/MDC switching in the optimal way, RD optimization framework are used. Lagrange optimization technique minimizes the RD-based cost function, D+M, where R is the actually coded bit rate and D is the estimated distortion. The recursive optimal pet-pixel estimatetechnique is adopted to estimate accurate the decoder distortion. Experimental results show that the proposed optimal split of DCT coefficients and SD/MD switching algorithm is more effective than the conventional MU algorithms in low PLR conditions as well as In high PLR condition.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.11
• /
• pp.7794-7800
• /
• 2015

Ginsenosides in ginseng berry has been known as functional materials showing physiological effect to the human. Specially, ginseng berry contains plenty of ginsenoside Re, but the study of extraction processes were not enough performed. Accordingly, the purpose of this study was to establish the optimized extraction process for obtaining ginsenoside Re from ginseng berry. The extraction process of ginsenosides was performed in 250 mL extraction flask containing 150 solvent and 10 g of dried ginseng berry. The extracted ginsenoside Re, Rg1 and Rd and total crude ginsenosides from ginseng berry were evaluated by TLC according to the treated conditions (the ratio of alcohol to water, extraction temperature, extraction period, and extraction times). Optimized conditions for extraction was 70% to 30% of the ratio of alcohol to water, $80^{\circ}C$ of extraction temperature, 4 h of extraction period, and 2 times of extraction frequency. The amount of total crude ginsenosides of the extract obtained from the optimized process was 88.6 mg/g based on dried ginseng berry. The composition of ginsenosides from the extracted was 5.5% of Rb1, 5.2% of Rc, 14.3% of Rd, 51.5% of Re, 8.1% of Rf, and 15.7% of Rg1. A protopanaxtriol ginsenosides of whole ginsenosides extracted was about 80%.

• Journal of electromagnetic engineering and science
• /
• v.6 no.3
• /
• pp.155-159
• /
• 2006

An efficient method is presented to design filters without the similarity transform of their coupling coefficient matrix as circuit parameters, which is very tedious due to pivoting and deciding rotation angles needed during the iterations. The transfer function of a filter is directly used for the design and its desired form is derived by the optimized rational-function fitting technique. A 3rd order coaxial lowpass filter is taken as an example to validate the proposed method.