• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.9
• /
• pp.1142-1147
• /
• 2008

For the effective use of cultured red seabream, the muscle color, taste and nutrition components between red seabreams cultured by feeding and starving were compared. The proximate composition of red seabream muscle cultured by starving (RCS) was 72.7% moisture, 21.1% protein, 3.7% lipid and 1.4% crude ash. In comparison to red seabream muscle cultured by feeding (RCF), moisture and crude lipid of RCS were each 3% higher and 3% lower. No difference was, however, found in the other proximate compositions. The Hunter color value of RCS was 37.52 for L value, -1.47 for a value, 0.71 for b value and 59.33 for ${\Delta}E$ value, which was slightly higher in the L value than that of red seabream muscle cultured feeding (RCF); however, no differences were found in the other Hunter color values. TCA soluble-N content of RCS was 403.8 mg/100 g, which was higher than that of RCF (314.7 mg/100 g). In taste values, the major free amino acids of both RCS and RCF were glutamic acid, alanine, lysine and histidine. Total amino acid content of RCS was 21.2 g/100 g, which was higher than that of RCF. The mineral content of RCS was slightly higher in potassium than that of RCF, while lower in magnesium. According to the result of sensory evaluation, RCS was superior in taste and texture to RCF, while similar in color and flavor.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.39 no.2
• /
• pp.29-38
• /
• 2021

According to the theory of concentration recovery(ART), experiencing landscapes with healing properties can heal human mental fatigue caused by intentional concentration. The ART illustrates four healing qualities of the landscape. ART admits that various landscapes can have healing properties, the four healing properties of the landscape explained that the greater the perceptual strength, the stronger the healing effect. Until now, research on healing landscapes has been mainly done on natural and urban landscapes. The purpose of this study is as follows. First, eIt is intended to evaluate the healing characteristics of the Yangdong village landscape using RCS and investigate the impact of the healing characteristics on the visiting preference of the target landscape. Second, Evaluating the landscape image of Yangdong Village landscape, Investigating the effect of landscape images on the healing properties of landscape. This study was conducted in Yangdong Village, Gyeongju, 127 college students participated in the survey. SD 16 items to analyze landscape images and RCS 22 items from Laumann(2001) to evaluate healing properties were used as measurement tools. The findings are summarized as follows. First, The landscape image of Yangdong Village was analyzed through SD method, the analysis of the factors of Yangdong Village landscape image results in two factors: place and singularity. Second, It demonstrates the reliability and validity of RCS, Three factors were extracted from the factor analysis results. Third, Landscape images have a positive effect on the three healing characteristics of RCS. Fourth, Three healing properties of RCS have been shown to have a positive effect on visiting preferences, The order of influence on the relative visiting preferences was analyzed as attractiveness, fit, sense of escape, and sense of space. The findings suggest that future work requires research to re-validate the reliability of RCS. It is also necessary to analyze landscape images for various landscape types to specifically understand the effects on healing characteristics.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.22 no.3
• /
• pp.311-319
• /
• 2019

This paper proposes an acceleration of the multi-level fast multipole algorithm(MLFMA) by using a double interpolation method. The MLFMA has been primarily used to conduct scattering analysis of electrically large targets, e.g. stealth aircraft. In the MLFMA, radiation functions of each basis functions are first precomputed, and then aggregated. After transfer calculations for the aggregations, each interaction is disaggregated, and then received in the testing function. The key idea of the proposed method is to decrease the sampling rates of the radiation and receiving functions. The computational complexity of the unit sphere integration in terms of the testing functions is thus highly alleviated. The remaining insufficient sampling rate is then complemented by using additional interpolation. We demonstrate the performance of the proposed method through radar cross-section(RCS) calculations for realistic aircraft.

• Journal of the Society of Naval Architects of Korea
• /
• v.44 no.4
• /
• pp.445-450
• /
• 2007

An optimum design process of the broad-band multi-layered radar absorbing material, using genetic algorithm, is established for the radar cross section reduction of a complex target, which consists of multiple reflection structures, such as surface warships. It follows the successive process of radar cross section analysis, scattering center analysis, radar absorbing material design, and reanalysis of radar cross section after applying the radar absorbing material. It is demonstrated that it is very effective even in the optimum design of the multi-layer radar absorbing material. This results from the fact that the three factors, i.e.. the incident angle range, broad-band frequencies, and maximum thickness can be simultaneously taken into account by adopting the genetic algorithm.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.10
• /
• pp.1204-1211
• /
• 2012

Measurement and analysis results of the extracted radiation-patterns from the field-experiments which were conducted to acquire the generic technology for calibration and validation of the satellite SAR system(Synthetic Aperture Radar) are presented in this study. Prototype of active transponder is adjustable within maximum 63.1 dBsm of RCS (Radar Cross Section) and includes the receiving-function with external receiver. To increase an accuracy of these field experiments, we repetitively measured satellite SAR systems of the same operating mode(i.e., COSMO-SkyMed No. 2 & 3, hh-pol., strip-map himage mode, 3 m resolution). Then, the reliability of experimental results was cross-checked through analysis of the RCS of active transponder on SAR image. The property of azimuth radiation patterns of satellite SAR system extracted from them has $0.352^{\circ}$ of HPBW(half-power beamwidth), $0.691^{\circ}$ of FNBW(first-null beamwidth), and 11.17 dB of PSLR(peak to side lobe ratio), respectively.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.4
• /
• pp.408-416
• /
• 2010

A study on the calibration of an X-band HPS(Hongik Polarimetric Scatterometer) system for ground-based operation is presented in this paper. In order to calibrate the scatterometer system, the degree of its distortions are analyzed by comparison between theoretical- and measured-values using the theoretically well-known calibration targets such as a metal sphere, a trihedral corner reflector(CR) and a metal cylinder. The calibration works in the field conditions depend on the precise and stable measurements of those calibration target. we present a measurement technique, so-called, an automatic 2-D target-scanning technique, using the incidence-angle(${\xi}-$ and ${\phi}-$ directions) control of HPS system. Then, we used STCT(Single-Target Calibration Technique) and GCT(General Calibration Technique) to calibrate a distortion of the scatterometer system, and measured the polarimetric RCS(Radar Cross Section) and phase-difference of a trihedral-CR as a test-target to verify the accuracy of the calibration technique. Then, three different types(i.e., 10, 20, 30 cm) of trihedral-CR were used. we obtained the error ranges about ${\pm}1.0$dB, ${\pm}0.5$ dB in a polarimetric RCS and about $-20^{\circ}{\sim}0^{\circ}$ and ${\pm}5^{\circ}$ in the co-polarized phase-difference by using the GCT and STCT, respectively.

• Proceedings of the KIEE Conference
• /
• 1999.07a
• /
• pp.214-216
• /
• 1999

This paper discussed an optimal designs of 2 pole fan motors in refrigerator using a Niching Algorithm. We applied a Niching method to multi-objective optimal design of air gap construct. This Niching genetic algorithm is called "Restricted Competition Selection"(RCS) that is suitable for real world problem such as shape or structural optimization of electromagnetic device. The finite element method being used for nonlinear numerical characteristic analysis is provided exact solution in the system. Through this process is reduced the cogging torque ripple in air gap.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.12
• /
• pp.1308-1315
• /
• 2009

A full-polarimetric scatterometer(HPS: Hongik Polarimetric Scatterometer) for X-band is designed, fabricated, and verified using the theoretically well-known point-targets in this paper. The X-band full-polarimetric scatterometer consists of an OMT(Orthogonal-Mode Transducer)+horn antenna, the angle control part for the OMT+horn antenna, a transmitter/receiver with a network analyzer and a frequency-conversion circuitry, and a movable support of these parts. We use an inclinometer sensor to control the vertical and horizontal incidence angles. The full polarimetric data can be obtained because of the polarization switches and the OMT. The accuracy of the scatterometer system is verified by measuring the polarimetric RCS(Radar Cross Section) of one of the theoretically well-known point-targets, i.e., a corner reflector.

• Proceedings of the Technology Innovation Conference
• /
• 2003.02a
• /
• pp.155-172
• /
• 2003

Government Research Institutes(GRI), together with universities and private research labs, constitute the core of the Korea's national innovation system, The aim of this paper is to analyze the current system of GRIs and the National Research Councils(RC) in Korea, and suggest some policy recommendations conducive to achieving a world class competitive research system. To identify the problems and policy issues, we have conducted interviews (with executives staffs of RCs, GRIs and government ministries) and questionnaire surveys. For benchmarking purposes, we have visited 9 public research institutes in the USA, UK, Germany, and France. From the analysis of the problems revealed from the interviews and questionnaires, 6 policy variables are identified: three of them, which we call systemware variables, are governance structure, resources allocation system, and management control system; and the other three, which we call humanware variables, are visions and strategic goals, leadership, and research manpower, respectively. We have found that 1;he current GRI/RC systems are inefficient mainly due to the rigid and bureaucratic governance structure and inconsistent resource (i.e., government budgets) allocation systems. We reject the idea of replacing the current RC system with such radical alternatives as 're-governmentization'or 'privatization'. Instead we recommend that the government introduce a better system of governance and national budget allocations, which in turn would help induce a better management control systems, clear research visions and goals, strong leadership on the part of the RC chairman, and more creative and motivated researchers. These recommendations may provide opportunities and rooms for chairmen of RCs and presidents of GRIs to exercise more positive leadership in terms of fitting the visions and goal of GRIs to the national R&D strategy and creating a rational management control system as well as motivating researchers in GRIs to be more creative and productive.

• Journal of Radiation Protection and Research
• /
• v.43 no.4
• /
• pp.154-159
• /
• 2018

Background: To prevent small leakage accidents, a real-time and direct detection system for small leaks with a detection limit below that of existing systems, e.g. $0.5gpm{\cdot}hr^{-1}$, is required. In this study, a small-size beta detector, which can be installed inside the reactor containment (CT) building and detect small leaks directly, was suggested and its feasibility was evaluated using MCNPX simulation. Materials and Methods: A target nuclide was selected through analysis of radiation from radionuclides in the reactor coolant system (RCS) and the spectrum was obtained via a silicon detector simulated in MCNPX. A window was designed to reduce the background signal caused by other nuclides. The sensitivity of the detector was also estimated, and its shielding designed for installation inside the reactor CT. Results and Discussion: The beta and gamma spectrum of the silicon detector showed a negligible gamma signal but it also contained an undesired peak at 0.22 MeV due to other nuclides, not the $^{16}N$ target nuclide. Window to remove the peak was derived as 0.4 mm for beryllium. The sensitivity of silicon beta detector with a beryllium window of 1.7 mm thickness was derived as $5.172{\times}10^{-6}{\mu}Ci{\cdot}cc^{-1}$. In addition, the specification of the shielding was evaluated through simulations, and the results showed that the integrity of the silicon detector can be maintained with lead shielding of 3 cm (<15 kg). This is a very small amount compared to the specifications of the lead shielding (600 kg) required for installation of $^{16}N$ gamma detector in inside reactor CT, it was determined that beta detector would have a distinct advantage in terms of miniaturization. Conclusion: The feasibility of the beta detector was evaluated for installation inside the reactor CT to detect small leaks below $0.5gpm{\cdot}hr^{-1}$. In future, the design will be optimized on specific data.