• Journal of Power Electronics
• /
• 제17권5호
• /
• pp.1338-1348
• /
• 2017

In this study, a modified ripple correlation control (RCC) maximum-power point-tracking (MPPT) algorithm is proposed for a single-stage single-phase voltage source inverter (VSI) on a grid-connected photovoltaic system (GCPVS). Unlike classic RCC methods, the proposed algorithm does not require high-pass and low-pass filters or the increment of the AC component filter function in the voltage control loop. A simple arithmetic mean function is used to calculate the average value of the photovoltaic (PV) voltage, PV power, and PV voltage ripples for the MPPT of the RCC method. Furthermore, a high-accuracy and high-precision MPPT is achieved. The performance of the proposed algorithm for the single-stage single-phase VSI GCPVS is investigated through simulation and experimental results.

• 대한기계학회논문집A
• /
• 제37권5호
• /
• pp.631-640
• /
• 2013

본 논문에서는 R6 코드와 RCC-MR A16 코드에서 원주방향 균열 배관에 대해 제시하는 1,2 차 복합 하중하에서 J-적분 계산법에 대한 정량적인 비교를 하였다. 균열의 형상, 균열의 깊이, 2 차 하중의 크기 변수에 대한 유한요소 해석을 수행 하였고 유한요소 해석 결과를 이용해 각 코드의 J-적분 평가법에 대한 정량적인 비교를 하였다. R6 코드는 $L_r=1$ 부근에서 보수적으로 평가 되었으며 RCC-MR A16 코드의 경우 기계하중이 작은 영역에서 보수적으로 평가되었다. 이와 같은 결과를 토대로 본 논문에서는 원주방향 균열이 있는 배관에 대하여 각 코드의 J-적분 계산을 보완할 수 있는 방법을 제시하였다. 그 결과로 보완된 J-적분 계산이 유한요소해석 결과와 잘 일치하는 것을 확인 하였다.

• 대한치과의사협회지
• /
• 제37권7호통권362호
• /
• pp.517-529
• /
• 1999

본 연구는 태령 19일된 백서 태자 두 개관에서 분리한 골모세포유사세포에 화학발암물질인 7,12-Dimethylbenz(a)anthracene (DMBA: 0.5 ㎍/ml) 및 tumor promotor인 12-O-tetradecanoyl-phorbol-13-acetate (TPA; 1.0 ㎍/ml)를 단독 혹은 복합 처리하여 PTRCC-DMBA, RCC-DMBA 및 RCC-DMBA-TPA 세포주를 확립시키고, 각 세포의 세포형태, 세포성장곡선, alkaline phosphatase와 acid phosphatase 활성 및 in vitro tumorigenicity를 연구하였다. 또한 c-myc, c-랜, c-jun, p53 및 Rb 유전자의 발현변화와 항암단백질인 p53 및 pRb 단백질의 발현변화를 관찰하여 골모세포유사세포가 악성형질전환되는 분자기전의 일단을 연구하고자 시행하였다. 본 실험에 사용한 모든 세포군에서 높은 aikaline phosphatase 활성과 낮은 acid phosphatase/alkaline phosphatase ratio를 보여 골모세포의 특성을 나타내었다. RCC-DMBA와 RCC-DMBA-TPA 세포는 정상세포나 PTRCC-DMBA에 비해 빠른 성장속도를 보였으며, 또한 SOFT AGAR상에서 colony를 형성하여 anchorage-independent growth를 나타내었다. 화학발암 물질로 악성변형된 세포들은 정상세포나 PTRCC-DMBA 세포에 비해 c-myc 유전자의 과발현이 관찰되었다. 정상세포에서 p53 유전자의 발현은 1.9 kb의 message만이 발현되었다. 그러나 화학발암물질로 형질전환된 세포에서는 1.9 kb message외에도 1.6 kb의 message가 더 발현되었으며, message의 양도 현저히 증가되었다. p53 단백질의 발현은 RCC-DMBA-TPA 세포에서 정상세포에 비해 현저히 감소하였으나, RCC-DMBA 세포에서는 유사한 경향을 보였다. Rb 유전자의 발현은 RCC-DMBA-TPA 세포에서만 현저히 감소하였으나, Rb 단백질의 발현은 정상세포에 비해 형질전환된 세포들에서 모두 현저히 감소되었고, 특히 RCC-DMBA-TPA 세포에서는 거의 발현되지 않았다. 이상의 결과에서 백서 태자 두 개관에서 분리한 골모세포유사세포는 화학발암물질인 DMBA에 의해 악성형질전환이 유도되었으며, c-myc의 과발현 및 p53과 Rb 단백질의 발현감소가 정상 골모세포유사세포의 악성변형과정에 밀접히 연관되어 있음을 시사한다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제18권1호
• /
• pp.61-65
• /
• 2005

The objective of this work was to investigate the nutritional requirements for the growth of Actinomyces sp. 9RCC5 isolated from the rumen of a native goat in Korea. The growth of strain 9RCC5 on the basal medium or the medium minus certain ingredients from the basal medium demonstrated that strain 9RCC5 showed absolute requirement of vitamin B complex mixture, while hemin and volatile fatty acids (VFA) were stimulatory to growth to some extent. The 9RCC5 strain grew well with casein hydrolysate as the sole added nitrogen source. However, neither a complex of 18 amino acids nor ammonium sulfate effectively replaced casein hydrolysate. Vitamins such as riboflavin and pantothenate were essential for growth, while thiamin and biotin were stimulatory. With regard to VFA, the growth was stimulated by acetic acid but inhibited by valeric acid. Relatively large quantities of $Na^+$, $K^+$ and $Ca^{2+}$ were absolutely required for growth. Supplementation of clarified rumen fluid to the basal medium in a range of 0-10% (vol/vol) resulted in an increased rate of growth as well as an increased extent of growth.

• 한국도로학회논문집
• /
• 제19권6호
• /
• pp.37-46
• /
• 2017

PURPOSES : A composite pavement utilizes both an asphalt surface and a concrete base. Typically, a concrete base layer provides structural capacity, while an asphalt surface layer provides smoothness and riding quality. This pavement type can be used in conjunction with rollercompacted concrete (RCC) pavement as a base layer due to its fast construction, economic efficiency, and structural performance. However, the service life and functionality of composite pavement may be reduced due to interfacial bond failure. Therefore, adequate interfacial bonding between the asphalt surface and the concrete base is essential to achieving monolithic behavior. The purpose of this study is to investigate the bond characteristics at the interface between asphalt (HMA; hot-mixed asphalt) and the RCC base. METHODS : This study was performed to determine the optimal type and application rate of tack coat material for RCC-base composite pavement. In addition, the core size effect, temperature condition, and bonding failure shape were analyzed to investigate the bonding characteristics at the interface between the RCC base and HMA surface. To evaluate the bond strength, a pull-off test was performed using different diameters of specimens such as 50 mm and 100 mm. Tack coat materials such as RSC-4 and BD-Coat were applied in amounts of 0.3, 0.5, 0.7, 0.9, and $1.1l/m^2$ to determine the optimal application rate. In order to evaluate the bond strength characteristics with temperature changes, a pull-off test was carried out at -15, 0, 20, and $40^{\circ}C$. In addition, the bond failure shapes were analyzed using an image analysis program after the pull-off tests were completed. RESULTS : The test results indicated that the optimal application rate of RSC-4 and BD-Coat were $0.8l/m^2$, $0.9l/m^2$, respectively. The core size effect was determined to be negligible because the bond strengths were similar in specimens with diameters of 50 mm and 100 mm. The bond strengths of RSC-4 and BD-Coat were found to decrease significantly when the temperature increased. As a result of the bonding failure shape in low-temperature conditions such as -15, 0, and $20^{\circ}C$, it was found that most of the debonding occurred at the interface between the tack coat and RCC surface. On the other hand, the interface between the HMA and tack coat was weaker than that between the tack coat and RCC at a high temperature of $40^{\circ}C$. CONCLUSIONS : This study suggested an optimal application rate of tack coat materials to apply to RCC-base composite pavement. The bond strengths at high temperatures were significantly lower than the required bond (tensile) strength of 0.4 MPa. It was known that the temperature was a critical factor affecting the bond strength at the interface of the RCC-base composite pavement.

• 해양환경안전학회지
• /
• 제13권3호
• /
• pp.207-212
• /
• 2007

본 연구는 우리나라 RCC/RSC의 효율성을 2개의 입력변수와 5개의 출력변수로 한 토대로 퍼지 DEA를 이용하여 측정 평가하였다. 특히, 본 연구에서는 해양사고 발생자료 뿐만 아니라 환경스트레스치에 의한 잠재적 해양사고 발생가능 자료도 고려하여 운영효율성을 분석하였다. 한편, 현실자료에는 수많은 애매성이 존재하기 때문에 본 연구에서는 DEA법에 퍼지이론을 이용한 퍼지 DEA법을 이용하였다. 이 퍼지DEA법은 ${\alpha}$-cut을 기반으로 한 크리습 선형계획문제로 변환된 것으로 입/출력 변수를 삼각형 퍼지수로 하여 해를 산출하는 방법을 제안하였고, 제안된 퍼지 DEA를 이용하여 퍼지 RCC/RSC의 순위를 결정하였다. ${\alpha}$-cut을 0.5로 하여 효율성을 산출한 결과 YS, BS, MP, TY, JJ, PH, US, IC, SC, DH, GS, TA, WD RCC/RSC 순으로 효율성이 높게 나타났다. 따라서 효율성이 비교적 낮게 평가된 TA, WD RCC/RSC는 효율성이 높은 준거집단을 참조하여 벤치마킹을 해야 할 필요가 있다.

• Asian Pacific Journal of Cancer Prevention
• /
• 제15권10호
• /
• pp.4239-4243
• /
• 2014

Background: This study investigated the influence of curcumin on HOX transcript antisense RNA (HOTAIR)-mediated migration of cultured renal cell carcinoma (RCC) cells. Materials and Methods: Five RCC cell lines (769-P, 769-P-vector, 769-P-HOTAIR, 786-0, and Kert-3 ) were maintained in vitro. The expression of HOTAIR mRNA was determined by quantitative real-time PCR and cell migration was measured by transwell migration assay. The effects of different concentrations of curcumin (0 to $80{\mu}mol/L$) on cell proliferation was determined by the CCK-8 assay and influence of non-toxic levels (0 to $10{\mu}M$) on the migration of RCC cells was also determined. Results: Comparison of the 5 cell lines indicated a correlation between HOTAIR mRNA expression and cell migration. In particular, the migration of 769-P-HOTAIR cells was significantly higher than that of 769-P-vector cells. Curcumin at $2.5-10{\mu}M$ had no evident toxicity against RCC cells, but inhibited cell migration in a concentration-dependent manner. Conclusions: HOTAIR expression is correlated with the migration of RCC cells, and HOTAIR may be involved in the curcumin-induced inhibition of RCC metastasis.

• Korean Journal of Radiology
• /
• 제22권5호
• /
• pp.735-741
• /
• 2021

Objective: To evaluate circularity as a quantitative shape factor of small renal tumor on computed tomography (CT) in differentiating fat-poor angiomyolipoma (AML) from renal cell carcinoma (RCC). Materials and Methods: In 257 consecutive patients, 257 pathologically confirmed renal tumors (either AML or RCC less than 4 cm), which did not include visible fat on unenhanced CT, were retrospectively evaluated. A radiologist drew the tumor margin to measure the perimeter and area in all the contrast-enhanced axial CT images. In each image, a quantitative shape factor, circularity, was calculated using the following equation: 4 x π x (area ÷ perimeter²). The median circularity (circularity index) was adopted as a representative value in each tumor. The circularity index was compared between fat-poor AML and RCC, and the receiver operating characteristic (ROC) curve analysis was performed. Univariable and multivariable binary logistic regression analysis was performed to determine the independent predictor of fat-poor AML. Results: Of the 257 tumors, 26 were AMLs and 231 were RCCs (184 clear cell RCCs, 25 papillary RCCs, and 22 chromophobe RCCs). The mean circularity index of AML was significantly lower than that of RCC (0.86 ± 0.04 vs. 0.93 ± 0.02, p < 0.001). The mean circularity index was not different between the subtypes of RCCs (0.93 ± 0.02, 0.92 ± 0.02, and 0.92 ± 0.02 for clear cell, papillary, and chromophobe RCCs, respectively, p = 0.210). The area under the ROC curve of circularity index was 0.924 for differentiating fat-poor AML from RCC. The sensitivity and specificity were 88.5% and 90.9%, respectively (cut-off, 0.90). Lower circularity index (≤ 0.9) was an independent predictor (odds ratio, 41.0; p < 0.001) for predicting fat-poor AML on multivariable logistic regression analysis. Conclusion: Circularity is a useful quantitative shape factor of small renal tumor for differentiating fat-poor AML from RCC.

• 전자공학회논문지C
• /
• 제34C권2호
• /
• pp.71-79
• /
• 1997

In this paper, we propose a new nearest-neighbor classifier with reduced computational complexity in search process. In the proposed classifier, the classes are divided into two sets: reference and non-reference sets. It reduces computational requriement by approximating the distance between the input and a class iwth the information of distances among the calsses. It calculates only the distance between the input and the reference classes. We convert a given classifier into RCC (reduced computational complexity but smal lincrease in misclassification probability of its corresponding RCC classifier. We designed RCC classifiers for the recognition of digits from the NIST database. We obtained an RCC classifier with 60% reduction in the computational complexity with the cost of 0.5% increase in misclassification probability.

• 한국안전학회지
• /
• 제27권6호
• /
• pp.14-19
• /
• 2012

The Helium cooled ceramic reflector(HCCR) test blanket module(TBM) has been designed and developed to participate the ITER(International Thermonuclear Experimental Reactor) test blanket program in Korea. The TBM was one of the main objectives for developing ITER for proving the tritium self-sufficiency and the heat transfers to produce the electricity with the breeding blanket concept. Among the TBM components, the first wall(FW) was the most important component in safety since it was directly faced a high level of a heat and fast neutrons from the plasma side and could protect the others components inside TBM. In this paper, the FW has been designed through the thermo-mechanical analysis considering ITER operation conditions. With the developed simple models, the stress limit analysis based on RCC-MR code which is the nuclear power plant design codes in France was evaluated for the allowable design criteria. The results showed that the designed FW model satisfied $1.5S_m$ or $3S_m$ of the allowable stress($S_m$) in RCC-MR code at the maximum stress region in the FW.