• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.93-96
• /
• 2005

Since the columns with flexure-shear failure have lower ductility than those with flexural failure, shear capacity curve models shall be applied as well as flexural capacity curve in order to determine ultimate displacement for seismic design or performance evaluation. In this paper, a modified shear capacity curve model is proposed and compared with the other models such as the CALTRANS model, Aschheim et al.'s model, and Priestley et al.'s model. Four shear capacity curve models are applied to the 4 full scale circular bridge column test results and the accuracy of each model is discussed. It may not be fully adequate to drive a final decision from the application to the limited number of test results, however the proposed model provides the better prediction of failure mode and ultimate displacement than the other models for the selected column test results.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.81-84
• /
• 2008

현행 도로교설계기준의 철근콘크리트 교각 심부구속 횡방향철근량 산정식은 중심축력을 받는 기둥에서 콘크리트 피복이 떨어져 나갔을 때 기둥의 축하중 저항강도 손실과 같거나 약간 큰 강도를 추가로 제공할 수 있도록 결정된 식이다. 그러나 설계기준의 횡방향철근량 산정식은 교각의 내진거동에 중요한 요소인 연성능력을 직접적으로 고려한 식이 아니므로 단면크기가 상대적으로 작은 경우 또는 내구성 등의 확보 차원에서 콘크리트 피복두께가 증가하여 단면적비율이 과도하게 커지는 경우에는 교각의 시공성 및 경제성이 저하될 정도로 많은 횡방향철근량이 요구되는 문제점을 야기한다. 본 논문에서는 콘크리트 피복두께가 심부구속 횡방향철근량 산정식에 미치는 영향을 비교, 분석하였다.

• 한국지진공학회논문집
• /
• 제11권5호
• /
• pp.49-59
• /
• 2007

이 연구의 목적은 진동대 실험을 통한 철근콘크리트 교각의 지진거동을 파악하는데 있다. 사용된 프로그램은 철근콘크리트 구조물의 해석을 위한 RCAHEST이다. 재료적 비선형성에 대해서는 균열콘크리트에 대한 인장, 압축, 전단모델과 콘크리트 속에 있는 철근모델을 조합하여 고려하였다. 동적 평형방정식의 해는 HHT 법에 의한 수치적분으로 구하였다. 이 연구에서는 진동대 실험을 통한 철근콘트리트 교각의 지진거동을 파악하기 위해 제안한 해석기법을 신뢰성 있는 실험결과와 비교하여 그 타당성을 검증하였다.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2003년도 춘계 학술발표회논문집
• /
• pp.385-392
• /
• 2003

Experimental investigation was conducted into the flexure/shear-critical behavior of earthquake-damaged reinforced concrete columns with lap splicing of longitudinal reinforcement in the plastic hinge region. Six test specimens in the aspect ratio of 2.5 were made with test parameters: confinement ratios, lap splices, and retrofitting FRP materials. They were damaged under series of artificial earthquakes that could be compatible in Korean peninsula. Directly after the pseudo-dynamic test, damaged columns were retested under inelastic reversal cyclic loading simultaneously under a constant axial load, P = 0.1 $f_{ck}$ $A_{g}$. Residual seismic performance of damaged columns was evaluated and compared to that of the corresponding original columns. Test results show that RC bridge piers with lap-spliced longitudinal steels in the plastic hinge region appeared to fail at low ductility. This was due to the debonding of the lap splice, which resulted from insufficient development of the longitudinal steels. The specimens externally wrapped with composite FRP straps in the potential plastic hinge region indicated significant improvement both in flexural strength and displacement ductility.y.

• 한국지진공학회논문집
• /
• 제6권5호
• /
• pp.45-51
• /
• 2002

비선형동적해석을 통하여 RC 입체라멘교에 대한 지진거동특성 및 파괴메카니즘에 관한 연구를 수행하였다. 파이버모델에 기초한 RC 프레임요소를 교각에 도입하여 3차원영역에서 모델링하여 비선형동적해석을 수행하였다. 해석의 정확성을 향상시키기 위하여 균열 진전후 콘크리트와 철근의 부작특성에 의한 재료역학적 특성차이를 고려하기 위하여 파이버는 철근영역(RC zone)과 무근영역(PC zone)으로 영역화하였다. 대상교량은 관성력 중심위치와 교량의 강성중심 위치가 일치하지 않아 비틀림을 동반한 복잡한 지진거동특성을 나타내었다. 이러한 거동특성에 의하여 유연한 교각 옆에 위치하는 상대적 강성이 큰 교각에 과다한 지진하중이 집중되어 파괴에 이르는 것으로 나타났다.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2003년도 추계 학술발표회논문집
• /
• pp.263-270
• /
• 2003

Before the implementation of the 1992 seismic design provisions in Korea, longitudinal steels of RC bridge piers were practically lap-spliced in the plastic hinge region. Experimental investigation was made to evaluate the seismic performance of RC bridge pier specimens in a flexure/shear mode. Six circular test specimens in an aspect ratio of 2.5 (600mm in diameter) were made with test parameters confinement ratio, lap splices, and retrofit FRP materials. They were damaged under a series of artificial earthquakes with 0.22g PGA, being compatible in Korean peninsula, through the pseudo-dynamic test. Probable damages were assessed by the Park and Ang damage index. Approximate 0.1 and 0.3 damage indices were obtained for RC specimens without lap splice and with lap splice, respectively. Directly after the pseudo-dynamic test, damaged test columns were laterally actuated under inelastic reversal cyclic loadings simultaneously under a constant axial load. Through curvature measurements, residual seismic performance was evaluated for test specimens. Test results show that RC pier specimens with lap-spliced appeared to fail at low ductility, but significant improvement was obtained for the ductility of these specimens if externally wrapped with FRP.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 봄 학술발표회 논문집
• /
• pp.553-558
• /
• 2001

Recent destructive seismic events demonstrated the importance of mitigating human casualties and serious property damages in design and construction of structures. The Korean Bridge Design Specifications (1992) adopted seismic design requirements based on the AASHTO specification, and minor modification was made in 2000. The longitudinal steel connection of reinforced concrete bridge column is sometimes practically unavoidable. The longitudinal reinforcement details affect seismic performance such as flexural failure and shear failure. This research aims to develop longitudinal steel connection details with confinement steel by experimental study for seismic performance of reinforced concrete bridge columns. Quasi-static test under three different axial load levels was conducted for 12 spiral column specimens. All the column specimens had the same aspect ratio of 3.5. The column specimens were transversely reinforced with spiral and with five different longitudinal steel connection. The final objective of this study is to suggest appropriate longitudinal reinforcement connection details for the limited ductility design concept and improve construction quality.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2001년도 춘계학술대회 논문집
• /
• pp.345-352
• /
• 2001

Recent destructive seismic events demonstrated the importance of mitigating human casualties and serious property damages in design and construction of structures. The Korean Bridge Design Specifications (1992) adopted seismic design requirements based on the AASHTO specification, and minor modification was made in 2000. The longitudinal steel connection of reinforced concrete bridge column is sometimes practically unavoidable. The longitudinal reinforcement details affect seisimc performance such as flexural failure and shear failure. This research aims to develop longitudinal steel connection details with confinement steel by experimental study for seismic performance of reinforced concrete bridge columns. Quasi-static test under three different axial load levels was conducted for 12 spiral column specimens. All the column specimens had the same aspect ratio of 3.5. The column specimens were transversely reinforced with spiral and with five different longitudinal steel connection. The final objective of this study is to suggest appropriate longitudinal reinforcement connection details for the limited ductility design concept and improve construction quality.

• 한국지진공학회논문집
• /
• 제5권3호
• /
• pp.29-36
• /
• 2001

국내 일반 국도상의 교량을 분석한 결과 형상비가 2.5 내외로서 휨-전단 파괴 거동이 예측되는 교각이 다수 존재하는 것으로 나타났으나 기존의 교각 내진 특성 연구는 주로 휨 파괴 거동을 보이는 교각에 대해 수행되어 왔다. 본 연구에서는 휨-전단 복합모드가 작용하여 파괴에 이를 가능성이 많은 형상비 2.5 내외인 기존 교각을 대상모델로 선정하고 실물크기 모형 및 축소모형 시험체를 제작하여 준정적 실험(quasi static test)을 수행하였다. 실험결과로부터 상사효과(scale effect)가 교각 내진 성능평가에 미치는 영향을 분석하였고, 또한 비내진 상세인 실험대상 교량에 대해 역량스펙트럼법을 이용하여 내진성능을 평가하였다.

• 콘크리트학회논문집
• /
• 제11권5호
• /
• pp.107-118
• /
• 1999

10 RC bridge piers have been made on a 1/3.4 scale model, and six piers of them were retrofitted with glassfiber. The have been tested in the quasi-static cyclic load so as to investigate their seismic enhancement before and after retrofitting with glassfibers. The objective of this experimental study is to investigate how to strength the ductility of reinforced concrete bridge piers which have been nonseismically designed and constructed in Korea before 1992. Important test parameters are axial load, load pattern, retrofit type. Glassfiber sheets were used for retrofitting in the plastic hinge region of concrete piers. The nonlinear behavior of bridge columns have been evaluated through their yield and ultimate strength, energy dissipation, displacement ductility and load-deflection characteristics under quasi-static cyclic loads. It can be concluded from the test that concrete piers strengthened with glassfibers have been enhanced for their ductile behavior by approximate 50%.