• 한국항공운항학회지
• /
• 제16권4호
• /
• pp.1-11
• /
• 2008

This research presents a study for the knowledge-based configuration design development of a RC (remote control) helicopter. Parametric design and knowledge based design concepts are introduced for rapid design changes and analyses using commercial CAD software, CATIA(R) Knowledgeware module. It is crucial for RC helicopter design because it enables rapid conceptual design through instant configuration changes. Positions and dimensions of RC helicopter parts were used as design parameters. As an example, positions of CG(center of gravity) points were traced and plotted as the configuration changes. Further research should be performed in areas of user interfaces and web-based multi-user environments instead of using Excel data sheets.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2007년도 춘계학술발표회 논문집
• /
• pp.157-160
• /
• 2007

In this study, the method of extracting DEM is presented using RC Helicopter Photogrammetry System. From the result of reference points and checkpoints using Total Station which is conventional type of survey, the errors turned out to $-0.194{\sim}0.224m$ on the X-axis, $-0.088{\sim}0.180m$ on the Y-axis and $-0.286{\sim}0.283m$ on the Z-axis when RC Helicopter Photogrammetry System utilized. Through this RC Helicopter Photogrammetry System, they can provide efficient update of digital map on toparchy area or access is not easy area.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 1999년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.281-284
• /
• 1999

Ground truth measurement system using RC helicopter is very useful to measure BRDF. The helicopter is operated human operator but it can keep its position by GPS aided hovering system. We developed the measurement system and have done ground truth in Mongolia in the summer of 1999 and have made sure the system can measure BRDF expectedly.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 D
• /
• pp.2317-2319
• /
• 2001

This paper presents a sensor fusion algorithm for the RC helicopter which uses a complementary filter. To measure the attitude angle of the helicopter, 3rate gyroscopes and a 3-axis accelerometer are mounted on the helicopter. The signals from them are passed though a complementary filter to produce estimation outputs. Experiments show that designed system is effective for the attitude estimation.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1992년도 춘계학술대회 논문집
• /
• pp.173-177
• /
• 1992

The Helicopter has a lot of flight modes. The most characteristic flight mode is Hovering. It enables the helicopter to be used in many situations. However, a helicopter has nonlinear dynamics so its mathematical modeling is very difficult. Hence it is not easy to control helicopter in hover. In this paper, RC model helicopter is selected as a plant. To stabilize the behavior of RC model helicopter, Fuzzy alogrithm is used as a controller and one camera is used as a sensor. To get proper Information from camera Image, three characteristic points are attatched to the helicopter and a position recognition algorithm is developed. Experiments are performed to stabilize 3 rotational motions synchronousely with fuzzy control algorithm. As a result, Fuzzy control represents better performances than the conventional PID control.

• 한국지리정보학회지
• /
• 제8권4호
• /
• pp.44-51
• /
• 2005

본 연구에서는 무선조정 헬리곱터 사진측량시스템을 이용하여 도로의 중심선 좌표 및 기타 도로시설물을 추출하는 새로운 방법을 제시하였다. 또한, 추출된 도로 중심선 측량에서 X방향은 -0.117m ~ 0.103m, Y축으로는 -0.014m ~ 0.009m 정도의 오차를 얻을 수 있었으며, 이는 기존의 도로 중심선 측량방법보다 나은 값으로 분석되었다. 향후, 이 시스템을 적용하여, 도로시설물의 유지관리뿐만 아니라 교통이 혼잡하고 접근하기 어려운 지역이나 소지역에서의 위치선정 및 선형설계에 필요한 DB을 구축할 수 있다고 판단된다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1998년도 제13차 학술회의논문집
• /
• pp.210-214
• /
• 1998

Radio-Controlled helicopter has superior movement abilities like as hovering or backward move. So it has been used as a sprinkler of agricultural medicines or an observer of dangerous area such as a volcano, etc. But its operation is not simple because it has many control factors and they interfere with each other. Therefore the helicopter is not controlled by simple theory in the case of automatic operation. Then fuzzy sliding mode control, which has fastness, fineness and robustness, is thought to be suitable to satisfy various requirements of the helicopter operation. In this work, the fuzzy sliding mode control was applied to the flying of RC helicopter, As tile result, it was controlled with good performance.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2004년도 추계학술발표회 논문집
• /
• pp.217-222
• /
• 2004

In this study, cutting slope's digital image has acquired by using video camera attached at RC helicopter. Resulted RMSE from image processing was approximately x-direction 0.27m, y-direction 0.23m and z-direction 0.35m. Application of these methods makes it convenient that acquisition of digital image about before and after the construction work of road cutting slope. Also systematical cutting slope's information acquisition will be possible by cutting slope's quantitative and qualitative analysis.

• 제어로봇시스템학회논문지
• /
• 제6권12호
• /
• pp.1120-1125
• /
• 2000

This paper presents a technique for estimating the attitude of a model helicopter at near hovering using a combination of inertial and non-inertial sensors such as gyroscope and potentiometer. To estimate the attitude of helicopter a simplified indirect Kalman filter based on sensor modeling is derived and the characteristics of sensors are studied, which are used in determining the optimal Kalman gain. To verify the effectiveness of the proposed algorithm simulation results are presented with real flight data. Our approach avoids a complex dynamic modeling of helicopter and allows for an elegant combination of various sensor data with different measurement frequencies. We also describe the method of implementation of the algorithm in the model helicopter.

• 한국지리정보학회지
• /
• 제10권2호
• /
• pp.82-90
• /
• 2007

최근 무분별한 개발로 인한 산림지역의 훼손으로 토양의 침식이 발생하고 이는 강우와 결부되어 하천 오염 및 하천의 바닥고를 상승시켜 통수능을 저하시키는 원인이 되기도 한다. 이를 위해 국내에서는 환경영향평가 및 재해영향평가를 통하여 토사유출의 정량적 분석을 실시하여 적절한 대책을 수립하도록 하고 있다. 토사유출량 산정 시 고려되는 매개변수 중 본 연구에서는 무선조종 헬기 통하여 취득한 영상 정보를 이용하여 절취사면의 사면경사계수(LS) 및 토양피복계수(C)를 영상분석을 이용하여 보다 정확한 값을 산정하였다.