• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.3
• /
• pp.1341-1349
• /
• 2011

This research is focused on an analysis on the structure of RAW image file and the development of a RAW image file viewer for an embedded device. Recently, several RAW image file formats are being used for saving and displaying the images created by various DSLR cameras, and the necessity of handing RAW images in mobile multimedia devices is increasing. For the development of RAW image decoding/encoding library applicable to WinCE-based embedded devices viewer, an analysis of RAW image file formats, such as CRW, CR2, PEF, NEF, MRW, have been performed because their formats are not released in public. By using the library, the analysis software which can extract RAW image data, 2~3 JPEG image files and other informations such as the specification of a camera and various photographic parameters from RAW image files, were developped and a RAW image file viewer which can run in WinCE-based embedded devices. The experimental result has shown that the viewer could encode and decode RAW image files successfully and it took approximately 10secs to load them to the screen in S3C6410 based embedded platform. The outcomes of this research cloud be a good information and solution to multimedia application developers.

• Journal of Astronomy and Space Sciences
• /
• v.17 no.2
• /
• pp.295-308
• /
• 2000

OSMI(Ocean Scanning Multi-Spectral Imager) raw image data(Level 0) were acquired and radiometrically corrected. We have applied two methods, using solar & dark calibration data from OSMI sensor and comparing with the SeaWiFS data, to the radiometric correction of OSMI raw image data. First, we could get the values of the gain and the offset for each pixel and each band from comparing the solar & dark calibration data with the solar input radiance values, calculated from the transmittance, BRDF (Bidirectional Reflectance Distribution Function) and the solar incidence angle($\beta$, $\theta$) of OSMI sensor. Applying this calibration data to OSMI raw image data, we got the two odd results, the lower value of the radiometric corrected image data than the expected value, and the Venetian Blind Effect in the radiometric corrected image data. Second, we could get the reasonable results from comparing OSMI raw image data with the SeaWiFS data, and get a new problem of OSMI sensor.

• Journal of Korean Society of Archives and Records Management
• /
• v.19 no.3
• /
• pp.155-178
• /
• 2019

The study aims to analyze the characteristics and problems of raw image file formats, evaluate its suitability for the management of digital photographic records, and suggest the introduction method to utilize such format in public institutions. Raw image file formats feature reversibility and flexibility. However, most of them are proprietary file formats that depend on the digital camera manufacturer. The DNG format, which was developed to standardize raw image file formats, has received positive reviews from overseas public agencies. However, the DNG format is not fully recognized as a standard; hence, it is appropriate to use it tentatively until the standard raw format appears. On the other hand, the converted digital photo file format is not recognized as an original with legal authenticity. Therefore, in the short term, DNG files created by format conversion and original raw files should be encapsulated and preserved. Furthermore, it is necessary to redefine the baseline of the hash value and file size to recognize the legal authenticity only with DNG files in the long term.

• Journal of the Korea Computer Graphics Society
• /
• v.30 no.3
• /
• pp.81-86
• /
• 2024

The Image Signal Processor (ISP) converts RAW images captured by the camera sensor into user-preferred sRGB images. While RAW images contain more meaningful information for image processing than sRGB images, RAW images are rarely shared due to their large sizes. Moreover, the actual ISP process of a camera is not disclosed, making it difficult to model the inverse process. Consequently, research on learning the conversion between sRGB and RAW has been conducted. Recently, the ParamISP[1] model, which directly incorporates camera parameters (exposure time, sensitivity, aperture size, and focal length) to mimic the operations of a real camera ISP, has been proposed by advancing the simple network structures. However, existing studies, including ParamISP[1], have limitations in modeling the camera ISP as they do not consider the degradation caused by lens shading, optical aberration, and lens distortion, which limits the restoration performance. This study introduces Positional Encoding to enable the camera ISP neural network to better handle degradations caused by lens. The proposed positional encoding method is suitable for camera ISP neural networks that learn by dividing the image into patches. By reflecting the spatial context of the image, it allows for more precise image restoration compared to existing models.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.530-533
• /
• 2005

A raw signal simulator for synthetic aperture radar (SAR) is a useful tool for the design and implementation of SAR system. Also, in order to analyze and verify the developed SAR processor, the raw signal simulator is required. Moreover, there is the need for a test system to help designing new SAR sensors and mission of SAR system. The derived parameters of the SAR simulator also help to generate accurate SAR processing algorithms. Although the ultimate purpose of this research is to presents a general purpose SAR simulator, this paper presents a SAR simulator in frequency domain at the first step. The proposed simulator generates the raw signal by changing various simulation parameters such as antenna parameters, modulation parameters, and sampling parameters. It also uses the statistics from an actual SAR image to imitate actual physical scattering. This paper introduces the procedures and parameters of the simulator, and presents the simulation results. Experiments have been conducted by comparing the simulated raw data with original raw SAR image. In addition, the simulated raw data have been verified through commercial SAR processing software.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.12 no.1
• /
• pp.13-18
• /
• 2008

Purpose: The image processing method due to the algorism which is various portion nuclear medical image decision is important it makes holds. The purpose of this study is it applies hereupon new image processing method SIEMENS (made by Pixon co.) Onco. flash processing reconstruction and the comparison which use the image control technique of existing the clinical usefulness it analyzes with it evaluates. Materials & Methods: 1. Whole body bone scan-scan speed 20 cm/min, 30 cm/min & 40 cm/min blinding test 2. Bone static spot scan-regional view 200 kcts, 400 kcts for chest, pelvis, foot blinding test 3. 4 quadrant-bar phantom-20000 kcts visual evaluation 4. LSF-FWHM resolution comparison ananysis. Results: 1. Raw data (20 cm/min) & processing data (30 cm/min)-similar level image quality 2. Low count static image-image quality clearly improved at visual evaluation result. 3. Visual evaluation by quadrant bar phantom-rising image quality level 4. Resolution comparison evaluation (FWHM)-same difference from resolution comparison evaluation Conclusion: The study which applies a new method Onco. flash processing reconstruction, it will be able to confirm the image quality improvement which until high level is clearer the case which applies the method of existing better than. The new reconstruction improves the resolution & reduces the noise. This enhances the diagnostic capabilities of such imagery for radiologists and physicians and allows a reduction in radiation dosage for the same image quality. Like this fact, rising of equipment availability & shortening the patient waiting move & from viewpoint of the active defense against radiation currently becomes feed with the fact that it will be the useful result propriety which is sufficient in clinical NM.

• Journal of Broadcast Engineering
• /
• v.28 no.1
• /
• pp.90-99
• /
• 2023

In this paper, we propose a super resolution network for raw sensor image which data size is lower comparatively to RGB image. But the actual capabilities of raw image super resolution depends on color correction because its absent of camera post processing that leads to unintended result having different white balance, saturation, etc. Thus, we introduce novel color corrector attention network by adopting the idea of precedent raw super resolution research, and tune to the our faced problem from data specification. The result is not superior to former researches but shows decent output on certain performance matrix. In the same time, we encounter new challenging problem of unexpected shadowing artifact around image objects that cause performance declination despite its good result overall. This problem remains a task to be solved in the future research.

• Journal of Ginseng Research
• /
• v.36 no.4
• /
• pp.469-476
• /
• 2012

Raw ginseng root of Panax ginseng is graded according to its shape and the quality of its internal tissue. A variety of grades are sold with prices according to grade. If an inferior raw ginseng is purchased, the consumer experience an economic loss. This research was conducted in order to explore the possibility of developing a noninvasive method for investigating raw ginseng's internal tissue. It has been determined that computed tomography (CT) scanner images agreed with actual cross-sections of raw ginseng. CT images were obtained to assess the internal portions of raw ginseng, and CT scans of raw ginseng were thoroughly measured using the Hounsfield unit (HU) system, since it allows for a more detailed analysis compared to nuclear magnetic resonance imaging. HU is a measure of attenuation used for CT images, with each pixel being assigned a value using a scale on which air is defined as -1000, water as 0 and compact bone as +1000. It takes about one second to process are slice and produce an image of the raw ginseng by a one channel CT scanner. An image good enough to discriminate the internal tissues can be obtained in 1/24 seconds with a one-channel CT scanner. Using this method, images of raw ginseng can be obtained and the characteristics of the internal tissues can be observed in a short time.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.8
• /
• pp.1941-1947
• /
• 2014

Document image binarization is largely used as previous stage of document recognition. And the result of document recognition is much affected from the result of document image binarization. There were many studies to binarize document images. The results of previous studies for document image binarization is varied according to the state of document images. In this paper, we propose a technique for document image binarization using MSER that is applied to extract objects from an image. At first, raw MSER objects are extracted from a document image. Because the raw MSER objects cannot be used for document image binarization, the extracted raw MSER objects are modified. Then the final MSER objects are used for document image binarization with the contrast image that is extracted from the document image. Experimental results show that the proposed technique is useful for document image binarization.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.5
• /
• pp.575-583
• /
• 2009

Various algorithms and methods, related to preprocessing of LiDAR data, are being developed and proposed. These methods are two ways, one of them is to use the regular form such as DSM or the image converted from raw LiDAR data, and the other is to use raw LiDAR data directly. The image processing method is one of representative method for the regular grid form data. This method is easy to apply to a numerical analysis technique and has an advantage of modeling and noise elimination through smoothing, but it lose the information during the data conversion. This study apply the image processing method to the irregular raw LiDAR data directly for the extracting ground information with minimized information loss and evaluate the extracting accuracy of ground information.