• 한국한의학연구원논문집
• /
• 제16권3호
• /
• pp.33-44
• /
• 2010

Pulse diagnosis is considered one of the most important diagnostic methods in traditional Korean medicine. Nonetheless, there have been troubles of using pulse diagnosis practically, for the lack of its differential standards and standardized terminology. Rapid pulse belongs to the several traditional pulse types. Rapid pulse was first mentioned in the chinese medical book Haungdineijin that matched it to the fever as well as yang in the human body. Meanwhile, chinese doctors in Ming Ching dynasty of China suggested that rapid pulse meant more of the yin, cold-related reaction than yang and fever. In this study, we organized the past arguments of the rapid pulse and went back tracking what biological activities could be possibly linked to the rapid pulse. Thus, we figured out that the inflammatory mechanism has a close connection with the rapid pulse. The definition of the rapid pulse in Haungdineijin was indicating the acute inflammatory response, while in Ming Ching dynasty, it indicated the chronic inflammation. This is the deficiency-excess pattern of the rapid pulse. Furthermore, we discussed the nonexpression pattern of the rapid pulse which could be happened in case of the heat stroke, etc.

• 한국동물학회지
• /
• 제26권2호
• /
• pp.95-106
• /
• 1983

Drosophila melanogaster의 Oregon-R 계통과 lethal free 집단을 대상으로 connected test tube apparatus를 사용하여 보행행동에 관한 rapid와 slow 행동을 방향성도태의 방법으로 15세대 동안에 걸쳐 도태하였다. 한편 10세대째부터 natural selection을 행하여 유전적 효과를 분석하였다. 1. 보행행동의 rapid와 slow 성질은 초기세대에서부터 뚜렷한 도태효과를 나타내어 제 7세대 이후에 각각 selection plateau에 달하였다. 2. 방향성 도태를 10세대 동안 실시한 후 realized heritability를 계산한 결과 rapid 성질은 $9\\sim14%$, slow 성질은 $11\\sim16%$로서 rapid행동보다 slow 행동의 유전율이 다소 높게 나타났다. 3. Rapid 성질을 지배하는 유전자와 slow 성질을 지배하는 유전자의 우열관계를 밝히기 위한 hybridization 실험결과 slow 유전자가 rapid 유전자에 대하여 partial dominance의 효과가 있었다. 4. 10세대 동안에 걸쳐 방향성 도태를 실시한 후 natural selection을 5세대 동안 실시한 결과 rapid 성질은 단 5세대만에 neutral의 상태 (6.5)로 복원되었으나 slow 성질은 모집단의 보행지수와 비교하여 전혀 변화가 없었다. 실험결과로 미루어 rapid와 slow 형질은 polygenic system에 의하여 control 되는 양적 형질임을 알았다. 한편 rapid 유전자는 natural selection에 의한 homeostasis의 효과가 있으나 slow 행동은 소수의 major gene에 의하여 지배되는 것을 알았다.

• 한국정밀공학회지
• /
• 제17권10호
• /
• pp.5-10
• /
• 2000

• 소성∙가공
• /
• 제11권4호
• /
• pp.323-331
• /
• 2002

The combination of rapid prototyping(RP) and rapid tooling(RT) has a potential for rapid manufacturing of three-dimensional parts. In the present study, a new RP system transfer type Variable Lamination Manufacturing using Expandable Polystyrene Foam (VLM-ST), is proposed to fabricate net shapes of three-dimensional prototypes. Various three-dimensional parts, such as a knob shape and a human head shape, are manufactured by the VLM-ST apparatus. In addition, a new rapid tooling technology, which utilizes a room temperature vulcanizing (RTV) molding technique and a triple reverse process technique, is proposed to manufacture net shapes of three-dimensional plastic parts using the prototypes of VLM-ST. A plastic part of the knob shape is produced by the proposed RT technology. The combination of the proposed RP and RT enables the manufacture of a plastic knob within two days.

• Journal of Trauma and Injury
• /
• 제19권1호
• /
• pp.41-46
• /
• 2006

Purpose: Hypovolemia is not uncommon among trauma patients in the emergency department (ED). Successful resuscitation of a hypovolemic patient often requires rapid intravenous administration of massive amounts of fluid. A rapid fluid infuser is used in the ED for this purpose, there have been no studies of their clinical uses and effectiveness. We studied clinical experience with a rapid fluid infuser at an urban university hospital in Seoul, Korea. Methods: We reviewed the medical records of 38 patients admitted to the ED with a history of application of a rapid fluid infuser from January 2004 to July 2005. Adult trauma patients older than 15 years of age were included in this study. Clinical data on the patients and the volume of fluid used to achieve a stable blood pressure were extracted from their medical records. Results: The total number of adult trauma patients with a history of application of a rapid fluid infuser from January 2004 to July 2005 in the ED was 16. The mean systolic blood pressure for deciding to apply the rapid fluid infuser was $74.9{\pm}12.7mmHg$. The mean time and volume used to achieve a stable blood pressure were 40.4 min and$2947.3{\pm}1339.2ml$, respectively. In all patients, the amount of fluid infused before using the rapid fluid infuser was between 500 ml and 10,000 ml, compared to 1,000 ml and 6,200 ml with the rapid fluid infuser. The mean amount of fluid per min. via the rapid fluid infuser was 85.5 ml. Vital signs were stabilized in 11 patients, 6 of the 11 were discharged alive. Conclusion: The mean amount of fluid delivered per min. via the rapid fluid infuser was much less than expected; thus, there should be clinical guidelines on volume resuscitation with a rapid fluid infuser in the ED. In the future, prospective, multicenter, clinical-data collection is needed for a more sophisticated study.

• 한국측량학회지
• /
• 제21권4호
• /
• pp.309-316
• /
• 2003

측량을 비롯한 여러 GPS응용분야에서 GPS 수신기에서 수집한 데이터를 빠른 시간 내에 처리하여 정밀 좌표를 산출할 필요성이 발생한다 GPS 데이터 처리에는 현재 네 종류의 GPS 위성궤도력을 이용할 수 있는데, 본 연구에서는 신속한 고정밀 데이터 처리에 가장 적합한 궤도력을 찾기 위해, 각 궤도력을 이용할 경우 성취할 수 있는 좌표성과의 정확성과 정밀도를 비교하였다. GPS 위성에서 제공되는 방송궤도력(broadcast orbits)과 ICS 등의 국제기관에서 제공하는 초신속궤도력(ultra-rapid orbits), 신속궤도력(rapid orbits), 그리고 정밀궤도력(precise orbits)을 이용하였다. 초신속궤도력을 이용하여 GIPSY로 데이터 처리를 하였을 때 일주일 평균 좌표 성과의 정확성이 1.5cm 이내였다. 본 연구를 통하여 GIPSY와 초신속궤도력을 이용하면, 신속한 데이터 처리가 가능한 동시에 고정밀 좌표성과를 얻을 수 있음을 알 수 있었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 춘계학술대회 논문집
• /
• pp.763-766
• /
• 2000

The Rapid Prototyping and Tooling technology has been developed. However, most commercial ones currently use resins or waxes as the raw materials. These days. the direct metal deposition methods are researched as a true rapid prototyping and tooling technology. A fundamental study on rapid prototyping and tooling with wire welding technology using $CO_2$ laser radiation was carried out in this paper. The main focus is to develop a simple commercial rapid prototyping and tooling system with the exiting laser welding technology. The process is investigated as a function of laser parameters and process variables. Basic parts were fabricated as out-put and their microstructure, hardness and tensile strength are examined for the reliability. In addition, Its advantages and disadvantages are discussed as a rapid prototyping and tooling system.

• Design & Manufacturing
• /
• 제2권2호
• /
• pp.20-24
• /
• 2008

Recently, the study for production technology is focused on cycle time reduction as various products are manufactured. In order to manufacture tool and die, rapid prototyping and rapid tooling are researched. Stereolithography apparatus, selective laser sintering, 3D printing, laminated object manufacturing are developed in rapid prototype. The purpose of this study is to develop rapid tooling technology using thermal spray process. This technology is not well-known to korea, but this study will be contributed in development of domestic molds industry through continuous research and development.

• 지역사회간호학회지
• /
• 제12권1호
• /
• pp.299-307
• /
• 2001

본 연구의 목표는 rapid appraisal의 사용을 통한 지역사회의 건강과 사회적 요구들을 알아내고 이들의 우선순위를 파악하여 지역주민과 써비스 제공자들 사이에 활동계획을 만들기 위함이다. 자료 수집은 Rapid appraisal의 정보피라미드를 통한 primary care team에 의해 3개의 자원들인 지역사회내 기존자료들과 지역 내에서 많이 사용해왔던 반 구조화된 면담지, 방문과 크리닉을 통한 직접 관찰로 자료수집을 하였다. 반 구조화된 면담지는 pilot study하고 검증한 후 사용하였다. 자료수집 대상은 Northern General hospital내에 등록되어진 100가구의 도시영세민 주택에 거주하는 자로 하였다. 결과로 면담자 들과 focus groups은 지역사회 내 지역건강요구들을 만나고 알아내며 건강뿐만이 아닌 사회적인 많은 변화가 요구되는 건강관련 우선순위를 알아내는 첫단계로써 rapid appraisal의 사용이 유용하다. 결론적으로 Rapid appraisal은 지역사회 내 Primary care에서 muti-displinary approach를 촉진하여 건강에 영향하는 다양한 요인사정의 질적인 방법으로 변화를 위한 행동 계획을 세우는데 좋은 평가 방법으로 확인되었다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2006년도 제33회 KOSCO SYMPOSIUM 논문집
• /
• pp.122-127
• /
• 2006

The objective of this research is to determine generally applicable design principles for the development of Rapid mix burner. Details operating RMB(Rapid mix burner) is designed that thermal NOx and prompt NOx formation be reduced through control of low peak flame temperature, and nearly uniform flame temperature by rapid mixing at the ignition point. Results from RMB(Rapid mix burner) achieving lower than 43 ppm NOx emissions and nearly flame temperature uniform