• 제목/요약/키워드: RAMP4

검색결과 212건 처리시간 0.024초

주차장 램프의 종단곡선 제원 산정에 관한 연구 (Determination of Dimension of Vertical Curve Elements at Parking Lot Ramps)

  • 권성대;김윤미;홍정표;하태준
    • 대한토목학회논문집
    • /
    • 제35권3호
    • /
    • pp.607-616
    • /
    • 2015
  • 최근 설치되는 주차장은 한정된 지상공간 및 건축물의 대형화, 지하화로 인하여 옥상이나 지하에 설치하는 것이 일반화되었으며 주차장 램프의 경사를 17%이하로 규제하고 있다. 하지만 주차장 램프 진입시 램프의 종단경사가 다소 급한 경우에 자동차의 차체와 경사로 바닥이 부딪치는 현상을 경험하거나 또는 경사로 바닥이 손상된 흔적을 자주 접하게 된다. 이에 본 연구는 주차장 램프의 시 종점부에 대한 종단해석을 통하여 자동차 및 경사로 바닥과 접촉되지 않는 적정한 종단곡선의 제원을 제시하여 구조물의 손상을 방지하고 운전자 및 동승자의 승차감과 안전성 확보하는데 도움이 되고자 한다. 본 연구에서는 첫 번째로 불특정 다수가 많이 이용하는 대형 건축물 주차장 램프를 대상으로 현장조사를 실시하여 문제점을 도출하였다. 두 번째로 주차장의 시점부 및 종점부에 대한 이론적 분석으로 상호 접촉여부를 평가하였으며 마지막으로 주차장 램프의 종단곡선 제원 산정을 위한 종단곡선 해석과 제원을 제시하였다. 또한, 종단곡선의 길이에 대한 분석 값과 일반식을 이용한 산정 값이 최소 0.4mm에서 최대 5mm이내의 차이로 적은 오차를 보이는 것을 검증하였다. 향후 본 연구를 통해 제시된 종단곡선을 적용할 경우 자동차 및 구조물의 손상을 방지하고 운전자의 승차감 및 안전성 확보는 물론 주차장 램프의 종단 설치기준이 재정립 될 것으로 기대된다.

Study of the Optimal Calcination Temperature of an Al/Co/Ni Mixed Metal Oxide as a DeNOx Catalyst for LNT

  • Jang, Kil Nam;Han, Kwang Seon;Hong, Ji Sook;You, Young-Woo;Suh, Jeong Kwon;Hwang, Taek Sung
    • 청정기술
    • /
    • 제21권3호
    • /
    • pp.184-190
    • /
    • 2015
  • 대부분의 LNT 촉매는 낮은 온도 영역에서의 NOx 산화를 위하여 Pt와 같은 귀금속류를 사용하는 것은 경제적인 부담을 가지고 있다. 따라서, 본 연구는 이러한 문제를 해결하기 위하여 시도되었다. 즉, Pt, Pd, Rh 등과 같은 귀금속류(platinum group metal, PGM)를 사용하지 않는 LNT (lean NOx trap)용 DeNOx 촉매를 개발하기 위해 시도하였다. 이를 위해서 예비실험을 통해 Pt등 귀금속류등의 PGM (platinum group metal)을 사용하지 않는 Al/Co/Ni 혼합 금속 산화물을 선정하였다. 궁극적으로는, 선정된 촉매의 소성온도에 따른 물리화학적 특성 변화가 NOx 전환율에 미치는 영향을 살펴보고자 하였다. 이들의 물리화학적인 성질을 평가하기 위해 XRD, EDS, SEM, BET 분석을 실시하였다. 이러한 평가를 실시한 결과, 모든 소성온도에서 혼합금속 산화물은 Co2AlO4 및 NiAl2O4의 스피넬 구조가 혼재되어 있는 것으로 나타났고, NOx 기체들의 산화-환원 반응이 이루어지기에는 충분한 기공부피와 기공크기를 갖고 있음을 알 수 있었다. 그러나 NH3-TPD 분석 결과에서는 소성온도가 700 ℃ 이하를 유지해야 하는 것으로 판단되었다. 더욱이 ramp test를 통해서는 NO 및 NOx 전환율을 동시에 만족할 수 있는 시료는 소성온도는 500 ℃에서 처리된 경우임을 알 수 있었다. 이러한 결과 등을 바탕으로, Al/Co/Ni=1.0/2.5/0.3 혼합 금속 산화물의 최적 소성온도는 500 ℃임을 알 수 있었다.

결정방향에 따른 결정질 실리콘 태양전지 후면전계 특성 연구 (Study of back surface field for orientation on Crystalline Silicon solar cell)

  • 김현호;박성은;김영도;송주용;탁성주;박효민;김성탁;김동환
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2010년도 추계학술대회 초록집
    • /
    • pp.41.2-41.2
    • /
    • 2010
  • 최근 태양전지 제조비용 절감을 위해 초박형 실리콘 태양전지 개발이 활발히 이루어지고 있다. 이에 따라 후면전계(Back Surface Field, BSF) 특성에 대한 관심이 높아지는 추세이다. 이에 본 연구에서는 후면의 결정방향 및 표면구조에 따라 형성되는 후면전계(BSF)의 특성에 대해 알아보고자 하였다. 후면이 절삭손상층 식각(Saw damage etching) 후 (100)면이 드러난 실리콘 기판과 텍스쳐링(Texturing) 후 (111)면이 드러난 실리콘 기판에 후면 전극을 스크린 인쇄 후 Ramp up rate을 달리 하여 소성 공정(RTP system)을 통해 후면전계(BSF)를 형성하여 비교하였다. 후면전계(BSF)의 형상과 특성만을 평가하기 위하여 염산을 이용하여 후면 전극층을 제거하였다. 후면 전극 제거 후 주사전자현미경(Scanning Electron Microscopy)과 3차원 미세형상측정기(Non-contacting optical profiler)로 후면전계(BSF)의 형상을 비교하였다. 또한 후면전계(BSF)의 특성을 평가하고자 Quasi-Steady-State Photo Conductance(QSSPC)를 사용하여 포화전류(Saturation current, $J_0$)을 측정하였고, 면저항 측정기(4-point probe)로 면저항을 측정하여 비교하였다. 후면 전계(BSF)는 (100)면과 (111)면에서 모두 Ramp up rate이 빠를수록 향상된 특성을 보였고, (111)면에서 더 큰 차이를 보였다.

  • PDF

Effect of filters and reconstruction method on Cu-64 PET image

  • Lee, Seonhwa;Kim, Jung min;Kim, Jung Young;Kim, Jin Su
    • 대한방사성의약품학회지
    • /
    • 제3권2호
    • /
    • pp.65-71
    • /
    • 2017
  • To assess the effects of filter and reconstruction of Cu-64 PET data on Siemens scanner, the various reconstruction algorithm with various filters were assessed in terms of spatial resolution, non-uniformity (NU), recovery coefficient (RC), and spillover ratio (SOR). Image reconstruction was performed using filtered backprojection (FBP), 2D ordered subset expectation maximization (OSEM), 3D reprojection algorithm (3DRP), and maximum a posteriori algorithms (MAP). For the FBP reconstruction, ramp, butterworth, hamming, hanning, or parzen filters were used. Attenuation or scatter correction were performed to assess the effect of attenuation and scatter correction. Regarding spatial resolution, highest achievable volumetric resolution was $3.08mm^3$ at the center of FOV when MAP (${\beta}=0.1$) reconstruction method was used. SOR was below 4% for FBP when ramp, Hamming, Hanning, or Shepp-logan filter were used. The lowest NU (highest uniform) after attenuation & scatter correction was 5.39% when FBP (parzen filter) was used. Regarding RC, 0.9 < RC < 1.1 was obtained when OSEM (iteration: 10) was used when attenuation and scatter correction were applied. In this study, image quality of Cu-64 on Siemens Inveon PET was investigated. This data will helpful for the quantification of Cu-64 PET data.

지역문화시설의 유니버설 디자인 적용성 평가연구 - 공연전시영역의 공공서비스 공간을 중심으로 - (A Study on Application of Universal Design Principles to Cultural Centers in Local Areas - Focused on Public Service Areas -)

  • 오찬옥
    • 한국실내디자인학회논문집
    • /
    • 제19권2호
    • /
    • pp.3-14
    • /
    • 2010
  • As the seniors and the disabled has increased, the demand for cultural centers has also increased in many local areas. This means that the local cultural centers designed from the viewpoint of universal design are needed, so that to be used by everyone without any difficulties. This study examined the applicability of universal design principles to the public service areas of the local cultural centers. The subject cultural centers were three local ones which had seating capacity of more than 1,000 and opened after the year of 2,000 in Gyungnam. The spatial scopes of the study were six public service areas of the local cultural centers : entrance area, corridor and pathway, stair, ramp, elevator, and rest room. The total 65 items for evaluating the applicability of universal design were selected and examined for six areas. On the whole, accessibility, such as wide pathway and flat floor was good. However, the following improvements were needed. 1) Handrails and rounded corner were needed on walls. 2) Consideration of the visually impaired like as braille sign was needed. 3) The handrails on ramp should be installed for usability. 4) The automatic door would be more useful to the physically disabled users. 5) Wider space and familiar handrail design and color were needed in the rest rooms for the handicapped.

선형시변 시스템 기준 모델 적응제어에 관한 고찰 (A Study on the Linear Time-Varying System of MRAC)

  • 구탁모;신장규;김채영
    • 대한전자공학회논문지
    • /
    • 제21권4호
    • /
    • pp.78-83
    • /
    • 1984
  • Hyperstability 이론에 의한 연속시간 시스템의 제어 알고리즘을 이산시간 선형시변 시스템의 적응제어에 직접 이용하여 시스템의 설계를 간단하게 하였다. 기준인력으로서 계단함수와 램프함수를 인가하여 설계된 시스템의 동작특성을 조사해 본 결과 공정의 출력이 모델의 출력에 적응함을 알 수 있었다.

  • PDF

고속도로 연결로의 교통사고예측모형 개발 (Traffic Crash Prediction Models for Expressway Ramps)

  • 최윤환;오영태;최기주;이철기;윤일수
    • 한국도로학회논문집
    • /
    • 제14권5호
    • /
    • pp.133-143
    • /
    • 2012
  • PURPOSES: Using the collected data for crash, traffic volume, and design elements on ramps between 2007 and 2009, this research effort was initiated to develop traffic crash prediction models for expressway ramps. METHODS: Three negative binomial regression models and three zero-inflated negative binomial regression models were developed for individual ramp types, including direct, semi-direct and loop, respectively. For validating the developed models, authors compared the estimated crash frequencies with actual crash frequencies of twelve randomly selected interchanges, the ramps of which have not been used for model developing. RESULTS: The results show that the negative binomial regression models for direct, semi-direct and loop ramps showed 60.3%, 63.8% and 48.7% error rates on average whereas the zero-inflated negative binomial regression models showed 82.1%, 120.4% and 57.3%, respectively. CONCLUSIONS: Conclusively, the negative binomial regression models worked better in traffic crash prediction than the zero-inflated negative binomial regression models for estimating the frequency of traffic accidents on expressway ramps.

자동차 긴급 피난 차선의 계획 설계 (Design of Truck Escape Ramps)

  • 구본충
    • 기술사
    • /
    • 제28권4호
    • /
    • pp.54-75
    • /
    • 1995
  • 본 보고서는 자동차 긴급 피난 차선에 관한 기술 자료, 문헌의 검토와 각 주별 운송 당국에 대한 설문 조사 결과를 기본으로 하여 작성되었다. 자동차 긴급 피난 차선(Truck Escape Ram-ps)이 미국의 고속도로에 채택된 것은 35년의 역사가 있으며 지금은 서부의 산악 지대로부터 에팔라치아까지, LA 교외는 물론 동북부의 조그마한 마을까지 약 27개 주에서 채택하고 있다 과거에는 자동차의 긴급 피난 차선의 위치는 통상 사고 발생 경위와 기술적인 판단에 따라 선정하였지만 지금은 대형 사고가 발생되기전에 자동차 긴급 피난 차선의 필요성과 위치를 선정할 수 있는 새로운 방범이 도입되고 있다. 방법중에는 경사 평가제(Grade Severity Ra-ting System : GSRS)가 유력한 방법으로 평가된다. 자동차 긴급 피난 차선의 설계법은 지금도 계속적으로 발전 단계에 있으며 현재는 (자갈 제동 노반식 피난 차선)의 선호도가 높은 것으로 되어 있다. 입자가 둥글고 균일한 입도 분포로서 입경이 13~18mm인 자갈이 회전 저항이 커서 피난 차선의 노반 재료로 많이 사용되고 있다. 긴급 피난 차선의 길이 결정을 위한 새로운 계산 방법은 공사비 절감에 초점을 두고 있으며 긴급 피난 차선의 목과 종점부의 처리에 관한 설계법에 대한 연구가 진행중에 있다. 각 주별 조사에 의하면 1주일에 I~2회 이상 이용되는 곳이 있으며 자동차의 이용이 적어 4륜 구동 차량의 운전자들이 차를 시험하는 등국도 운전 연습장으로 사용되는 곳도 있었다. 따라서 긴급 피난 차선의 목적 외 사용을 제한하는 안내 표지판의 설치와 규정 강화를 위한 노력이 요구되고 있다. 내리막길의 정상부에는 미리 안내판을 설치하고 브레이크 점검 구역을 설치해 두면 안전 운행에 도움을 줄 수 있을 것이며 공공 정펄 매체를 이용한 안내 광고를 함으로써 운전자가 한계 상태에 위치한 자동차의 긴급 피난 차선을 적극적으로 이용할 수 있도록 유도하는 방법이 사용되고 있다. 적절한 유지 관리는 긴급 피난 차선의 효율적인 운영에 필수적인 요소로서 사용 후 입도 조정 및 표면 처리(fluffing :부풀림)가 필요하며 설계시나 유지 관리시에 노반의 세립토 제거 작업은 긴급 피난 차선의 수명 연장은 물론 만족할 만한 기능 유지에 결정적인 요인이 될 것이다. 현행 시공법을 개선하기 위하여는 몇 개 분야의 추가 연구가 필요하단. 예를 들면 비용 편익 분석, 위치 선정 기법 확립, 진입 속도 및 피난 차선 연장의 결정 조건, 골재 기능 평가, 다수 진입로의 필요성, 효과적인 운전자 교육 정책 등이 그것이다. 자동차 긴급 피난 차선은 유용한 시설로 여러곳에서 그 기능이 발휘되고 있으므로 많은 고속도로 관계자들은 설계, 시공 및 유지 관리 측면에서 유의해야 할 것이다.

  • PDF

고속도로 버스전용차로제의 운영개선에 대한 고찰 (The Review on working improvement of highway Buses only lane system)

  • 조행래
    • 기술사
    • /
    • 제33권4호
    • /
    • pp.63-67
    • /
    • 2000
  • Presently, Weekend Buses only lane system is in force in Gyung-Bu Highway causes traffic delay at the northern of Su-won IC and have reduced the efficiency of Highway. To solve this problems, Buses only lane system is working at the northern of Su-won IC should be charged over from Median Buses only lane system to Curb Buses only lane system. It makes good effects on reducing weaving occurs when cars change lane, traffic accidents, ease control on violation cars, improving Level of Service in the Ramp, etc.

  • PDF

표준형 및 속동형 스프링클러헤드의 반응시간지수와 소화성능 (Response Time Index and Suppression Capability of Standard and Quick Response Sprinkler Head)

  • 정길순;이병곤
    • 한국안전학회지
    • /
    • 제13권4호
    • /
    • pp.59-70
    • /
    • 1998
  • In this study, response time index(RTI) of standard and quick response type sprinkler head are measured and compared through ramp and plunge test in heated wind tunnel. Also discharge rate and water distribution, actual delivered density(ADD), fire test with wood cribs are performed to compare the fire suppression capability and the operation time and temperature between standard and quick response type sprinkler head.

  • PDF