• Korean Journal of Applied Biomechanics
• /
• v.29 no.3
• /
• pp.157-166
• /
• 2019

Objective: This study examined the effects of stimulating fingertip temperature on the patterns of force sharing and stability properties during multi-finger force production tasks. Method: 9 adult subjects (male: 3, female: 6, age: $26.11{\pm}4.01yrs$, height: $169.22{\pm}5.97cm$, weight: $61.44{\pm}11.27kg$) participated in this study. The experiment consisted of three blocks: 1) maximal voluntary contraction (MVC) task, 2) single-finger ramp task to quantify enslaving (i.e., unintended force production by non-task fingers), and 3) 12 trials of multi-finger steady-state force production task at 20% MVC. There were three temperature conditions including body-temperature (i.e., control condition), $40^{\circ}C$, and $43^{\circ}C$, and the stimulation was given to the index finger only for all experimental conditions. Results: There were no significant differences in the MVC forces, enslaving, and the accuracy of performance during the steady-state task between the conditions. However, the share of stimulated index finger force increased with the index fingertip temperature, while the share of middle finger force decreased. Also, the coefficient of variation of both index and middle finger forces over repetitive trials increased with the index fingertip temperature. Under the framework of the uncontrolled manifold (UCM) hypothesis used to quantify indices of multi-finger synergies (i.e., stability property) stabilizing total force during the steady-state task, the two variance components within the UCM analysis increased together with the fingertip temperature, while no changes in the synergy indices between the conditions. Conclusion: The current results showed that fingertip temperature stimulation only to index finger does not affect to muscle force production capability of multi-finger, independence of individual fingers, and force production accuracy by the involvement of all four fingers. The effect of fingertip temperature on the sharing pattern and force variation may be due to diffuse reflex effects of the induced afferent activity on alpha-motoneuronal pools. However, the unchanged stability properties may be the reflection of the active error compensation strategies by non-stimulated finger actions.

• Journal of Korea Port Economic Association
• /
• v.37 no.3
• /
• pp.93-104
• /
• 2021

A coastal ferries, which serve as a mode between mainland and offshore islands, are frequently used by islanders and travelers visiting islands. Therefore, it is located in a place with good accessibility to the downtown so that users can use it conveniently. However, research on the built environment and walking environment of coastal ferry terminals has not been conducted to ensure that elderly islanders and general travelers can use comfortably the coastal ferry terminal. In this study, with a focus on the coastal ferry terminal space, the walking section was set as 1)the accessibility of the coastal ferry terminal, 2)the built environment for using the coastal ferry terminal, and 3)walking environment in the ferry boarding and disembarkation at the coastal ferry terminal, and 4, 5)walking environment in the ferry. An evaluation tool was developed to measure the walking environment for each walking section, and the importance and satisfaction of users were analyzed using the IPA for the Yeosu Coastal Ferry Terminal. As a result, in the process of approaching the ferry terminal, 'convenience of using public transportation by foot' and 'convenience of using signposts guiding the location and direction of the ferry terminal' were investigated as concentrated areas. On the other hand, the built environment inside the ferry terminal and the walking environment showed that the satisfaction of the users was high. Regarding the walking environment from the ferry terminal to the ferry, the 'surface walking environment of the walking path', 'convenience of walking with luggage', 'convenience of walking in the slope section', and 'convenience of walking in the ferry ramp section' showed low satisfaction. This study can be used as basic data for improving the facilities and walking environment of Yeosu Coastal Ferry Terminal and is expected to be used as data for comparative research with other coastal ferry terminals.

• The Korean Journal of Nuclear Medicine
• /
• v.38 no.4
• /
• pp.318-324
• /
• 2004

Purpose: Philips GEMINI is a newly introduced whole-body GSO PET/CT scanner. In this study, performance of the scanner including spatial resolution, sensitivity, scatter fraction, noise equivalent count ratio (NECR) was measured utilizing NEMA NU2-2001 standard protocol and compared with performance of LSO, BGO crystal scanner. Methods: GEMINI is composed of the Philips ALLEGRO PET and MX8000 D multi-slice CT scanners. The PET scanner has 28 detector segments which have an array of 29 by 22 GSO crystals ($4{\times}6{\times}20$ mm), covering axial FOV of 18 cm. PET data to measure spatial resolution, sensitivity, scatter fraction, and NECR were acquired in 3D mode according to the NEMA NU2 protocols (coincidence window: 8 ns, energy window: $409[\sim}664$ keV). For the measurement of spatial resolution, images were reconstructed with FBP using ramp filter and an iterative reconstruction algorithm, 3D RAMLA. Data for sensitivity measurement were acquired using NEMA sensitivity phantom filled with F-18 solution and surrounded by $1{\sim}5$ aluminum sleeves after we confirmed that dead time loss did not exceed 1%. To measure NECR and scatter fraction, 1110 MBq of F-18 solution was injected into a NEMA scatter phantom with a length of 70 cm and dynamic scan with 20-min frame duration was acquired for 7 half-lives. Oblique sinograms were collapsed into transaxial slices using single slice rebinning method, and true to background (scatter+random) ratio for each slice and frame was estimated. Scatter fraction was determined by averaging the true to background ratio of last 3 frames in which the dead time loss was below 1%. Results: Transverse and axial resolutions at 1cm radius were (1) 5.3 and 6.5 mm (FBP), (2) 5.1 and 5.9 mm (3D RAMLA). Transverse radial, transverse tangential, and axial resolution at 10 cm were (1) 5.7, 5.7, and 7.0 mm (FBP), (2) 5.4, 5.4, and 6.4 mm (3D RAMLA). Attenuation free values of sensitivity were 3,620 counts/sec/MBq at the center of transaxial FOV and 4,324 counts/sec/MBq at 10 cm offset from the center. Scatter fraction was 40.6%, and peak true count rate and NECR were 88.9 kcps @ 12.9 kBq/mL and 34.3 kcps @ 8.84 kBq/mL. These characteristics are better than that of ECAT EXACT PET scanner with BGO crystal. Conclusion: The results of this field test demonstrate high resolution, sensitivity and count rate performance of the 3D PET/CT scanner with GSO crystal. The data provided here will be useful for the comparative study with other 3D PET/CT scanners using BGO or LSO crystals.

• Culinary science and hospitality research
• /
• v.8 no.1
• /
• pp.55-69
• /
• 2002

Sedum Sarmentosum Bunge has been used as medical material and food in Korea. To upgrade it's value as a materials of beverage, I research and analysed nutritive substance and taste. Inorganic components content was included in the order of Ca, mg, P, K, Na, in line, and there were little Fe, Cu, Zn. It appeared much Ascorbic acid contents in May sample for March sample, but it was included less than other Green Vegetables. Chlorophyll contents decreased about 37.8% and 37.6% to the first each contents after seven days resulting measuring May sample and March sample in room temperature. There was much difference in appearance. Sedum Sarmentosum Bunge included a little polyphenol contents. Polyphenol contents decreased a little in five days in May sample and March sample. I measured phenol compounds of garlic acid, vani11ic acid, caffeic acid, p-coumaric acid, ferulic acid, most of consisted in corrected forms. Fragrance components were confirmed 9 kinds in March sample, 11 kind in May sample the common components in May sample and March sample were 7-octen-4-o1.

• The Korean Journal of Nuclear Medicine
• /
• v.38 no.3
• /
• pp.259-267
• /
• 2004

Purpose: NEMA NU2-2001 was proposed as a new standard for performance evaluation of whole body PET scanners. in this study, system performance of Siemens CTI ECAT EXACT 47 PET scanner including spatial resolution, sensitivity, scatter fraction, and count rate performance in 2D and 3D mode was evaluated using this new standard method. Methods: ECAT EXACT 47 is a BGO crystal based PET scanner and covers an axial field of view (FOV) of 16.2 cm. Retractable septa allow 2D and 3D data acquisition. All the PET data were acquired according to the NEMA NU2-2001 protocols (coincidence window: 12 ns, energy window: $250{\sim}650$ keV). For the spatial resolution measurement, F-18 point source was placed at the center of the axial FOV((a) x=0, and y=1, (b)x=0, and y=10, (c)x=70, and y=0cm) and a position one fourth of the axial FOV from the center ((a) x=0, and y=1, (b)x=0, and y=10, (c)x=10, and y=0cm). In this case, x and y are transaxial horizontal and vertical, and z is the scanner's axial direction. Images were reconstructed using FBP with ramp filter without any post processing. To measure the system sensitivity, NEMA sensitivity phantom filled with F-18 solution and surrounded by $1{\sim}5$ aluminum sleeves were scanned at the center of transaxial FOV and 10 cm offset from the center. Attenuation free values of sensitivity wire estimated by extrapolating data to the zero wall thickness. NEMA scatter phantom with length of 70 cm was filled with F-18 or C-11solution (2D: 2,900 MBq, 3D: 407 MBq), and coincidence count rates wire measured for 7 half-lives to obtain noise equivalent count rate (MECR) and scatter fraction. We confirmed that dead time loss of the last flame were below 1%. Scatter fraction was estimated by averaging the true to background (staffer+random) ratios of last 3 frames in which the fractions of random rate art negligibly small. Results: Axial and transverse resolutions at 1cm offset from the center were 0.62 and 0.66 cm (FBP in 2D and 3D), and 0.67 and 0.69 cm (FBP in 2D and 3D). Axial, transverse radial, and transverse tangential resolutions at 10cm offset from the center were 0.72 and 0.68 cm (FBP in 2D and 3D), 0.63 and 0.66 cm (FBP in 2D and 3D), and 0.72 and 0.66 cm (FBP in 2D and 3D). Sensitivity values were 708.6 (2D), 2931.3 (3D) counts/sec/MBq at the center and 728.7 (2D, 3398.2 (3D) counts/sec/MBq at 10 cm offset from the center. Scatter fractions were 0.19 (2D) and 0.49 (3D). Peak true count rate and NECR were 64.0 kcps at 40.1 kBq/mL and 49.6 kcps at 40.1 kBq/mL in 2D and 53.7 kcps at 4.76 kBq/mL and 26.4 kcps at 4.47 kBq/mL in 3D. Conclusion: Information about the performance of CTI ECAT EXACT 47 PET scanner reported in this study will be useful for the quantitative analysis of data and determination of optimal image acquisition protocols using this widely used scanner for clinical and research purposes.

• Progress in Medical Physics
• /
• v.25 no.4
• /
• pp.271-280
• /
• 2014

Recently, digital breast tomosynthesis (DBT) has been investigated to overcome the limitation of conventional mammography for overlapping anatomical structures and high patient dose with cone-beam computed tomography (CBCT). However incomplete sampling due to limited angle leads to interference on the neighboring slices. Many studies have investigated to reduce artifacts such as interference. Moreover, appropriate filters for tomosynthesis have been researched to solve artifacts resulted from incomplete sampling. The primary purpose of this study is finding appropriate filter scheme with FBP reconstruction for DBT system to reduce artifacts. In this study, we investigated characteristics of various filter schemes with simulation and prototype digital breast tomosynthesis under same acquisition parameters and conditions. We evaluated artifacts and noise with profiles and COV (coefficinet of variation) to study characteristic of filter. As a result, the noise with parameter 0.25 of Spectral filter reduced by 10% in comparison to that with only Ramp-lak filter. Because unbalance of information reduced with decreasing B of Slice thickness filter, artifacts caused by incomplete sampling reduced. In conclusion, we confirmed basic characteristics of filter operations and improvement of image quality by appropriate filter scheme. The results of this study can be utilized as base in research and development of DBT system by providing information that is about noise and artifacts depend on various filter schemes.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.45 no.6
• /
• pp.98-114
• /
• 2017

This study analyzed the commemorative landscapes of eight Holocaust concentration camp memorials(HCCM) of Germany and Poland from a landscape architecture point of view including historical landscape, places and remains, and monuments. A site survey was conducted at Dahau concentration camp memorial(CCM) and Bergen-Belsen CCM of Germany in September of 2015 and the Auschwitz-Birkenau extermination camp memorial(ECM), Majdanek ECM, Belzec ECM, Sobibor ECM, Treblinka ECM, Chelmno ECM of Poland in April of 2016. The results are as follows. First, the landscape of the concentration camp at Dahau CCM, Auschwitz ECM, and Majdanek ECM liberated by the Allied Forces was well conserved with the maintenance of camp facilities and the spatial structure of camps while monuments and memorials seized by sociopolitical argument were built with restriction. But Belzec ECM, Sobibor ECM, Treblinka ECM, and Chelmno ECM devastated and planted artificially to forest were overwhelmingly surrounded with natural landscape, and also, excavated relics and remains were preserved and the monuments were built at the place of memory. Second, gas chambers, crematoriums, guard posts, electric wire fences, railroads and ramps, barracks, and drainage ditches were considered to be typical facilities present in the camp structure and the gas chambers, crematoriums, human ashes, and mass graves demonstrated the horrible history of these camps and the railroad and ramp where Jewish prisoners arrived also had the strong sense of place. These remains were regarded as symbolic elements to create a memory of the tragedy and place. Third, commemoration of victims was applied as the basic concept and recalling the memory of the Holocaust was also considered very important content. Religious reconciliation and peace was represented at Dahau CCM and the Jewish identity was strongly expressed at Treblinka ECM and Belzec ECM representing the Jewish community and Judaism. Fourth, the monuments with semi-abstract styles and abstract sculptures represented the Holocaust symbolically and narratively and came into the conflict caused by the abstractness to the memorial landscape at Auschwitz-Birkenau ECM and Bergen-Belsen CCM. Fifth, remains for recalling the memory of tragedy and place and symbolic monuments to stand for public memory were juxtaposed at the same place and preserving on the authenticity of camp site had been conflicted with monumentalizing intentionally. Further study will required a concrete investigation of the monuments in the HCCM and an attempt to comparatively study the commemoration characteristics of memorials in Korea.

• Journal of Korean Home Economics Education Association
• /
• v.21 no.3
• /
• pp.1-28
• /
• 2009

The purpose of this research was to provide the information needed for improving the elderly housing education and the elderly housing contents of Technology and Home Economics textbook. Thus, the elderly housing contents of current Technology and Home Economics textbook were categorized. Then, a total of 233 teachers were surveyed to examine their importance perception on the elderly housing contents. Elderly housing contents were grouped into S categories, each of which was named 'safety and safety management', 'room plan for the elderly', 'shrinking stage in family life cycle and dependency stage in housing life cycle','a house for 3-generation extended family', and 'universal design'. Teachers' importance perception was generally high for 'safety and safety management' and especially for 'safety and safety management' of bathroom(protection against slippery floor, safety bar, the appropriate position and height of shower, bathtub, and wash stand) ; the basic guidelines of 'room plan for the elderly'(emergency call, closely located bathroom, flat and non-slippery floor) ; the general guidelines during shrinking stage in family life cycle and dependency stage in housing life cycle'(protection equipments against safety accident, emergency call, flat and non-slippery floor) ; independent life among 3-generation extended family members(bathroom for the elderly, space plan for independent life among extended family members) ; the basic design guidelines of universal design(safety bar in bathroom, flat floor) and the guidelines of universal design which were especially helpful for wheelchair users(enough empty space in front of door and in corridor, wide door and corridor). Recommendations for the elderly housing education and the elderly housing contents of Technology and Home Economics textbook were that 'emergency call','safety bar in bathroom' and 'flat and non-slippery floor' were the most basic guidelines for elderly housing; that 'enough empty space in front of door and in corridor', 'wide door and corridor', 'low and wide steps', 'ramp for wheelchair users' and 'D-type or lever-type door handle' were most recommendable guidelines for universal design; that 'need for elderly housing', 'types of elderly housing', 'alternatives and choices of dependency stage in housing life cycle' and 'house plans for shrinking stage in family life cycle' were required guidelines for increasing elderly-only family.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.16 no.1
• /
• pp.44-53
• /
• 2006

This study purposed to investigate air pollution in car shipping yards and, for this purpose, we selected an outdoor open-air yard and an indoor ramp into the ship and measured the concentrations of sulfur dioxide, nitrogen dioxide, carbon monoxide, PM10, PM2.5 and heavy metals in the air. The results of this study are as follows. No significant difference was observed in temperature and humidity between the outdoor and indoor workshop, and the average air flow was 0.52 m/s in the indoor workshop, which is higher than 0.19 m/s in the outdoor workshop(p<0.01). The average concentrations of sulfur dioxide, nitrogen dioxide, carbon monoxide, PM10 and PM2.5 according to workplace were 0.03 ppm(${\pm}0.01$), 0.03 ppm(${\pm}0.01$), 0.46 ppm(${\pm}0.22$), $39.44{\mu}g/m^3$(${\pm}2.45$) and $5.45{\mu}g/m^3$(${\pm}1.15$) respectively in the outdoor workshop, and 0.15 ppm(${\pm}0.05$), 0.22 ppm(${\pm}0.06$), 8.85 ppm(${\pm}3.35$), $236.39{\mu}g/m^3$(${\pm}58.21$) and $152.43{\mu}g/m^3$(${\pm}35.42$) respectively in the indoor workshop. Thus, the concentrations of gaseous substances in the indoor workshop were 4.9-19.2 times higher than those in the outdoor workshop, and the concentrations of fine dusts were 5.9-27.9 times higher(p<0.01). In addition, according to the result of investigating pollutant concentrations according to displacement and the number of car loaded when shipping gasoline cars into the ship, no significant relation between the number of cars loaded and pollutants was observed in shipping passenger cars, but the concentrations of nitrogen dioxide and carbon monoxide got somewhat higher with the increase of the number of cars loaded(p<0.05). In addition, the concentrations of nitrogen dioxide, carbon monoxide, PM10 and PM2.5 in the air were significantly higher when shipping recreational vehicles, the displacement of which is larger than passenger cars, than when shipping passenger cars(p<0.01). On the other hand, the average heavy metal concentrations of the air in indoor workshop were: lead $-0.05{\mu}g/m^3$(${\pm}0.10$); chromium $-0.90{\mu}g/m^3$(${\pm}0.18$); zinc $-0.38{\mu}g/m^3$(${\pm}0.24$); copper $-0.18{\mu}g/m^3$(${\pm}0.22$); and manganese and cadmium not detected. In addition, the complaining rates of 'asthma,' a major symptom of chronic respiratory diseases, were 18.5% and 22.5% respectively in indoor workers and outdoor workers. Thus the rate was somewhat higher in indoor workers but the difference was not statistically significant. The complaining rates of 'chronic cough' and 'chronic phlegm' were very low and little different between indoor and outdoor workers. The results of this study show that the reason for the higher air pollution in indoor than in outdoor workshop is incomplete combustion of fuel due to sudden start and over-speed when cars are driven inside the ship. In order to prevent high air pollution, efficient management measures should be taken including the observance of the optimal speed, the improvement of old ships and the installation of efficient ventilation system.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.6
• /
• pp.1731-1741
• /
• 2014

Recently, many overpasses, highway, and advanced transit systems have been constructed to distribute the traffic congestion, thus small size of curved bridges with small curvature such as ramp structures have been increasing. Many of early curved bridges had been constructed by using straight beams with curved slabs, but curved steel beams have replaced them due to the cost, aesthetic and the advantage in building the section form and manipulating the curvature of beams, thereby large portion of curved bridges were applied with steel box girders. However, steel box girder bridges needs comparatively high initial costs and continuous maintenance such as repainting, which is the one of the reason for increasing the cost. Moreover, I-type steel plate girder which is being studied by many researchers recently, seem to have problems in stability due to the low torsional stiffness, resulting from the section characteristics with thin plate used for web and open section forms. Therefore, in recent studies, researchers have proposed curved precast PSC girders with low cost and could secured safety which could replace the curved steel girder type bridges. Hence, this study developed a Smart Mold system to manufacture efficient curved precast PSC girders. And by using this mold system a 40 m 2-girder bridge was constructed for a static flexural test, to evaluate the safety and performance under ultimate load. At the manufacturing stage, each single girder showed problems in the stability due to the torsional moment, but after the girders were connected by cross beams and decks, the bridge successfully distributed the stress, thereby the stability was confirmed. The static loading test results show that the initial crack was observed at 1,400 kN when the design load was 450 kN, and the load at the allowable deflection by code was 1,800 kN, which shows that the safety and usability of the curved precast PSC bridge manufactured by Smart Mold system is secured.