• 제목/요약/키워드: RAM2-RAM4

검색결과 647건 처리시간 0.025초

연속파 파이버 레이저를 이용한 SS400의 절단 특성에 관한 연구 (A Study on SS400 Cutting Characteristics using Continuous Wave Fiber Laser)

  • 오용석;이가람;박은경;유영태
    • 한국생산제조학회지
    • /
    • 제21권4호
    • /
    • pp.644-650
    • /
    • 2012
  • This paper show the 2kW fiber laser cutting properties of SS400. The study was comparison of traditional 4kW $CO_2$ Laser cutting and 2kW Fiber laser cutting characteristics for the application of Industrial 2D Laser Cutting Machine. The laser used in this investigation was an IPG YLU-2000 multi-mode Ytterbium Fiber machine with a maximum power of 2000W and a wave length of 1070 nm. The laser was used in its Continuous Wave (CW) mode with an approximately top hat beam intensity distribution. Fiber laser high quality cuts at a large range of speeds (ranging from 2000 to 3800 mm/min) which has been obtained for the 2.3mm Sheet of SS400. 2kW power Fiber laser cut was able to max. 20mm sheets of SS400 (speed range from 650 to 850 mm/min). Fiber laser cutting used in conventional hole nozzle could cut 12mm SS400 but used in special dual cutting nozzle could cut 20mm SS400.

굴착 후 타입된 PHC 말뚝의 재하시험 결과 비교분석 사례 연구 (Case Study of Comparative Analysis between Static and Dynamic Loading Test of PHC Pile)

  • 김재홍;여규권
    • 한국지반환경공학회 논문집
    • /
    • 제14권11호
    • /
    • pp.13-23
    • /
    • 2013
  • 서해안 연약지반에서 굴착 후 시멘트밀크의 주입없이 경타로 시공된 PHC 말뚝에 대하여 동재하시험과 정재하시험을 병행하여 그 상관성을 분석하였다. 초기 동재하시험은 Hydraulic Hammer(Ram Weight 7.0tf)를 사용하여 낙하고 0.8m에서 최종 평균 관입량은 3.0~8.0mm로 측정되었다. 이때 CAPWAP 분석결과에 의한 최종 허용지지력은 776.4~1,053.6kN/본으로 확인되었다. 정재하시험은 동재하시험을 한 동일 말뚝에 실시하는 것이 가장 이상적이나, 현장 여건상 인접의 말뚝에 설계지지력(120.0tf)의 200%인 총 시험하중(2,400.0kN)을 8단계로 나누어 재하시험한 결과, 총침하량은 15.97~16.38mm, 잔류침하량은 4.48~5.38mm로 측정되었으며, 모든 분석법을 적용하여도 항복하중과 극한하중은 확인되지 않았다. 따라서 최대시험하중(240.0tf)을 항복하중으로 간주하여 안전율 2.0으로 나누어 허용지지력을 산정한 결과 허용지지력은 1,200kN/본 이상 되는 것으로 나타났다. 그 결과 정재하시험보다 동재하시험이 1.54~1.1.4배 큰 것으로 나타났다.

FIXED POINTS OF A CERTAIN CLASS OF ASYMPTOTICALLY REGULAR MAPPINGS

  • Jung, Jong-Soo;Thakur, Balwant-Singh;Sahu, Daya-Ram
    • 대한수학회보
    • /
    • 제37권4호
    • /
    • pp.729-741
    • /
    • 2000
  • In this paper, we study in Banach spaces the existence of fixed points of asymptotically regular mapping T satisfying: for each x, y in the domain and for n=1, 2,…, $$\parallelT^nx-T^ny\parallel\leq$\leq$a_n\parallelx-y\parallel+b_n (\parallelx-T^nx\parallel+\parallely-T^ny\parallely)$$ where $a_n,\; b_n,\; C_n$ are nonnegative constants satisfying certain conditions. We also establish some fixed point theorems for these mappings in a Hibert space, in L(sup)p spaces, in Hardy space H(sup)p, and in Soboleve space $H^{k,p} for 1<\rho<\infty \; and \; k\geq0$. We extend results from papers [10], [11], and others.

  • PDF

단삼 표준화시료의 급성독성에 관한 연구 (Single Oral Toxicity Study on the Standardized Extract of Salvia miltiorrhiza)

  • 장보윤;오보람;손동환;김성연
    • 생약학회지
    • /
    • 제39권4호
    • /
    • pp.352-356
    • /
    • 2008
  • Acute toxicity of standardized extract of Salvia miltiorrhiza Bunge was examined using male and female ICR mice. Mice were treated with standardized extract the intragastrically at 5 mg/kg, 50 mg/kg, 500 mg/kg or 2,000 mg/kg and observed for two weeks. At the doses used, no mortality or abnormal clinical signs in animals were shown during at the observation period. Also there was no difference in net body weight gain, gross pathological findings at the terminal sacrifice among the groups mice treated with different doses of the test substance. The results suggested that acute oral toxicity of standardized extract of S. miltiorrhiza in mice is very low at the conditions employed in this study.

On the physical origins for the two-halo conformity

  • Seo, Seongu;Yoon, Suk-Jin
    • 천문학회보
    • /
    • 제42권2호
    • /
    • pp.74.1-74.1
    • /
    • 2017
  • The two-halo conformity is that if a central galaxy in a dark matter halo is quenched in star formation, the central galaxies in other neighboring halos (within ~ 4 Mpc) even with no causal contact seem conformed to be quenched. The galactic similarity ranging far beyond the virial radius of each dark matter halo cannot be explained by known environmental effects (ram pressure, tidal interaction, etc.). Here, using a cosmological hydrodynamic simulation, we put forward new physical origins for the phenomenon; the back-splash galaxies scenario and the halo assembly bias scenario. We discuss the relative importance of the two explanations on a quantitative basis.

  • PDF

GSM방식 단말기용 모뎀칩을 위한 GSM Full Rate 보코더 구현 (Implementation of GSM Full Rate vocoder for the GSM mobile modem chip)

  • 이동원
    • 한국음향학회:학술대회논문집
    • /
    • 한국음향학회 2001년도 추계학술발표대회 논문집 제20권 2호
    • /
    • pp.9-12
    • /
    • 2001
  • 본 논문에서는 유럽 통신 표준화기구인 ETSI 의 SMGll에서 채택된 GSM Full Rate(FR) 보코더 알고리wma[1]을 Teak DSP Core를 이용하여 실시간 구현하였다. GSM FR 보코더는 유럽에서 사용하는 통신 시스템인 GSM 의 full-rate Traffic Channel(TCH)의 표준 코덱[2]으로서 GSM HR, GSM EFR GSM AMR과 더불어 모뎀칩 내에 장착되는 필수적인 음성 서비스이다. 구현된 GSM FR는 13.05kbps의 비트율을 가지고 있으며, 인코더와 디코더 기능 외에 voice activity detection(VAD)[3]블록과 DTX[4]블록 등의 부가 기능도 구현되어 있다. 구현에 사용된 Teak[5]는 DSP Group 의 16bit고정 소수점 DSP core로서 최대 140MIPS 의 성능을 낼 수 있고 400bits ALU 와 두개의 MAC 이 장착되어 있어 음성 및 채널 부호화기의 실시간 처리에 최적화 되어있다. 구현된 GSM FR 은 인코더와 디코더 부분이 각각 약 235 MIPS 및 1.19MIPS 의 복잡도를 나타내며, 사용된 메모리는 프로그램 ROM 3.9K words, 데이터 ROM(table) 396 words 및 RAM 932words이다.

  • PDF

고정점 및 견실 알고리즘의 조합형 ICA에 의한 혼합영상 분리 (Separation of Mixed Images Using Hybrid ICA of Fixed_point and Robust Algorithm)

  • 조용현;오정은;김아람
    • 한국정보처리학회:학술대회논문집
    • /
    • 한국정보처리학회 2003년도 추계학술발표논문집 (중)
    • /
    • pp.623-626
    • /
    • 2003
  • 본 연구에서는 고정점 알고리즘의 독립성분분석과 원신호의 시간적 상관성을 고려한 견실 알고리즘의 독립성분분석을 혼합한 조합형 독립성분분석에 의한 혼합영상의 분리를 제안하였다. 여기서 고정점 알고리즘은 뉴우턴법의 경신규칙을 이용함으로써 빠른 분리속도와 우수한 분리성능을 가지며, 견실 알고리즘은 2차적 통계성의 일괄처리 알고리즘으로 시간적 상관성 및 낮은 kurtosis를 가진 영상분리에 효과적이다. 이들 기법들을 $512{\times}512$ 픽셀의 4개 영상으로부터 임의의 혼합행렬에 따라 발생되는 흔합영상의 분리에 적용한 결과, 우수한 분리성능과 빠른 분리속도가 있음을 확인하였다.

  • PDF

개인용 컴퓨터에 의한 방사선기술학 논문의 검색 및 데이터베이스 구축에 관한 고찰 (A Study on Retrieval of Article and Making Database in Radio Technology with Personal Computer)

  • 김성환
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제20권1호
    • /
    • pp.85-90
    • /
    • 1997
  • Although many useful arfticles appear in the journals published in Korea, they are not always cited by researchers mainly due to absence of efficient searching system. The author made a program with 4 predefined filtering forms to detect published articles rapidly and accurately. The program was coded using database management system CA-Clipper VER 5.2. I used 486DX-II (8 Mbyte Ram, VGA, 560 Mbyte Hard Disk), desk-jet printer(HP-560k), and MS-DOS VER 5.0. I inputed twenty articles in the journal of Korean Society Radiotechnological Technology. And this program test for retrive article and made database.

  • PDF

Identification and Expression Patterns of kif3bz during the Zebrafish Embryonic Development

  • Lee, A-Ram;Rhee, Myung-Chull
    • Animal cells and systems
    • /
    • 제13권4호
    • /
    • pp.411-418
    • /
    • 2009
  • We are reporting the identification, expression patterns, and possible biological functions of zebrafish kif3b (kif3bz) encoding 475 amino acids. Kif3Bz contains the kinesin motor domain, catalytic domain, KISc domain, and one single coiled coil domain. Phylogenetic analysis indicates that kif3bz is a highly conserved gene among the tested vertebrates. First of all, both maternal and zygotic messages of kif3bz were evenly distributed in the blastomeres at 2-cell stage. Its ubiquitous expression throughout the blastomeres continued till 40% epiboly. However, kif3bz transcripts became restricted in Kupffer's vesicle at tailbud and 6-somite stages. At 13-somite stage, kif3bz expression pattern became specific to the telencephalon, diencephalon, trigeminal placode, and somites. Such expression patterns were further intensified in the telencephalon, diencephalons, hind brain, pronephric ducts, optic vesicles, and spinal cord neurons in the 23-somite stage embryos, and last till 24 hpf. We discussed possible functions of Kif3Bz related to the vertebrate embryonic development.

통합생산시스템의 성능평가를 위한 시뮬레이션모델의 비교연구 (A Comparative Study on Performance Analysis of Integrated Manufacturing System Using Simulation Models)

  • 황흥석;조규성
    • 한국시뮬레이션학회:학술대회논문집
    • /
    • 한국시뮬레이션학회 2000년도 추계학술대회 논문집
    • /
    • pp.34-40
    • /
    • 2000
  • 통합 생산시스템의 성능평가문제는 많은 요소들이 고려되어야하며 수리모델을 위하여 많은 가정사항들이 주어진다. 실제 제생산시스템의 운영환경을 고려한 성능평가를 위하여 Simulation Model들이 많이 연구되어 오고있으나, 실제 활용의 용이성 및 관련 data 및 출력의 이해가 실무자들에게는 매우 어려운 문제로 남아 있다 본 연구에서는 사용자의 요구 수준과 System의 환경 여건에 따른 각종 Simulation Model들을 비교 조사 연구하여 수요자의 요구와 System의 특성에 적절한 방법을 활용할 수 있도록 하였다. 본 연구에 다음과 같은 Simulation Model들을 비교 연구하였다 : 1) CAN-WIP Model, 2) RAM-Cost Model, 3) FACTOR/AIM 응용, 및 4) AutoMod의 응용, 본 연구에 고려된 Simulation Model들의 관련 응용 Program을 개발하고 Sample 예제를 통하여 결과를 비교 분석하였다.

  • PDF