• Journal of Korean Society of Rural Planning
• /
• v.20 no.4
• /
• pp.13-24
• /
• 2014

The pond wetlands in agricultural landscape are important natural resources that carry out the function of bio-diversity conservation. However, recently, those have been gradually embedded as their utility value were disappeared. And, the assessment methods used for pond wetlands are insufficient. Therefore, this study was conducted to examine the conservation value of pond wetlands by using the modified RAM, and present the improvement of assesment methods. The study sites, a total of 32 pond of 4 types by land use, were selected on the basis of Ramsar Convention. Through the analysis of precedent studies, the weighted 8 functions were adjusted. According to the assessment results, pond wetlands made the largest contribution to Fishery and Herpetile Habitat function. In addition, it also made large contribution to Floral Diversity, Wildlife Habitat, and Water Quality Protection function. On the other hand, it made a small contribution to Aesthetics and Recreation, Runoff Attenuation, Shoreline /Stream Bank Protection, and Flood/Storm Water Storage function due to the characteristics of small-scale pond wetlands. In the assessment of 8 functions, house type showed the worst assessment result, and mountain type showed the best assessment result. It is thought that those are due to land use type in terms of vicinity. 10 items among 52 of the modified RAM showed the same assessment results in all land use types. Accordingly, it is required to be deleted and modified the assessment method. On the other hand, it is required to add age, interference, and water use to the assessment method. It is thought that these results can be utilized for the development and modification of assessment methods focused on pond wetlands in rural area.

• Journal of the Microelectronics and Packaging Society
• /
• v.30 no.3
• /
• pp.73-77
• /
• 2023

In this study, we developed a Multi-level FeRAM (Ferroelectrics random access memory) device utilizing different ferroelectric materials and analyzed its operation through C-V analysis using simulations. To achieve Multi-level operation, we proposed an MFM (Multi-Ferroelectric Material) structure by depositing two different ferroelectric materials with distinct properties horizontally on the same bottom electrode and subsequently adding a gate electrode on top. By analyzing C-V peaks based on the polarization phenomenon occurring under different voltage conditions for the two materials, we confirmed the feasibility of achieving Multi-level operation, where either one or both of the materials can be polarized. Furthermore, we validated the process for implementing the proposed structure using semiconductor fabrication through process simulations. These results signify the significance of the new structure as it allows storing multiple states in a single memory cell, thereby greatly enhancing memory integration.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.11
• /
• pp.909-917
• /
• 2021

In this work, a one-dimensional combustor solver was constructed for the scramjet control m odel. The governing equations for fluid flow, Arrhenius based combustion kinetics, and the inje ction model were implemented into the solver. In order to validate the solver, the zero-dimensi onal ignition delay problem and one-dimensional scramjet combustion problem were considered and showed that the solver successfully reproduced the results from the literature. Subsequentl y, a ramjet analysis algorithm under subsonic speed conditions was constructed, and a study o n the inlet Mach number of the combustor was carried out through the thermal choking locatio ns at ram conditions. In such conditions, a model for precombustion shock train analysis was i mplemented, and the algorithm for transition section analysis was introduced. In addition, in or der to determine the appropriateness of the ram mode analysis in the code, the occurrence of a n unstart was studied through the length of the pseudo-shock in the isolator. A performance a nalysis study was carried out according to the geometry of the combustor.

• Proceedings of the KGS Conference
• /
• 2005.05a
• /
• pp.35-36
• /
• 2005

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.18 no.2
• /
• pp.162-169
• /
• 2009

This paper describes a study on dynamic characteristics analysis and dynamic compliance evaluation of a 5-axis multi-tasking machine tool of ram-head type. Structural dynamics analysis and evaluation are necessary to machine tool design and development to secure good machine tool performance against tough and harsh machining conditions. In this study, natural frequencies and corresponding vibration modes of the machine tool structure were analyzed by using both F.E.M. modal analysis and impulse hammer test. Furthermore, dynamic compliance of the machine tool was analyzed by using F.E.M. and also measured by using a hydraulic exciter test. Both the theoretical analysis and experimental test results showed good agreement with each other.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.23 no.5
• /
• pp.502-515
• /
• 2020

To identify the dynamic characteristics of the Auto-leveling system applied to the Tractor-Trailer type Transporter for mounting a large scale precision equipment, Dynamics Modeling & Simulation were performed using general Dynamics Analysis Program - RecurDyn(V9R2). The axial load data, transverse load data and pad trace data of leveling actuators were obtained from M&S. And they were analyzed and compared with each other by parameters, i.e. friction coefficients on the ground, landing ram speed of actuators, and direction & quantity of ground slope. It was observed that ground contact friction coefficients affected to transverse load and pad trace; the landing ram speed of actuators to both amplitude of axial & transverse load, and this phenomena was able to explain from the frequency analysis of the axial load data; the direction of ground slope to driving sequence of landing ram of actuators. But the dynamic behaviors on the two-directional slope were very different from them on the one-directional slope and more complex.

• Korean Journal of Materials Research
• /
• v.32 no.9
• /
• pp.384-390
• /
• 2022

A spin coating process for RRAM, which is a TiN/TiO₂/FTO structure based on a PTC sol solution, was developed in this laboratory, a method which enables low-temperature and eco-friendly manufacturing. The RRAM corresponds to an OxRAM that operates through the formation and extinction of conductive filaments. Heat treatment was selected as a method of controlling oxygen vacancy (V_O), a major factor of the conductive filament. It was carried out at 100 ℃ under moisture removal conditions and at 300 ℃ and 500 ℃ for excellent phase stability. XRD analysis confirmed the anatase phase in the thin film increased as the heat treatment increased, and the Ti³⁺ and OH- groups were observed to decrease in the XPS analysis. In the I-V analysis, the device at 100 ℃ showed a low primary SET voltage of 5.1 V and a high ON/OFF ratio of 10⁴. The double-logarithmic plot of the I-V curve confirmed the device at 100 ℃ required a low operating voltage. As a result, the 100 ℃ heat treatment conditions were suitable for the low voltage driving and high ON/OFF ratio of TiN/TiO₂/FTO RRAM devices and these results suggest that the operating voltage and ON/OFF ratio required for OxRAM devices used in various fields under specific heat treatment conditions can be compromised.

• 한국전산유체공학회:학술대회논문집
• /
• 2000.05a
• /
• pp.159-165
• /
• 2000

In this paper, numerical study has been done for the improvement of the superdetonative ram accelerator performance and for the design optimization of the system. The objective function to optimize the premixture composition is the ram tube length required to accelerate projectile from initial velocity $V_o$ to target velocity $V_e$. The premixture is composed of $H_2,\;O_2,\;N_2$ and the mole numbers of these species are selected at design variables. RSM(Response Surface Methodology) which is widely used for the complex optimization problems is selected as the optimization technique. In particular, to improve the non-linearity of the response and to consider the accuracy and efficiency of the solution, design space stretching technique has been applied. Separate sub-optimization routine is introduced to determine the stretching position and clustering parameters which construct the optimum regression model. Two step optimization technique has been applied to obtain the optimal system. With the application of stretching technique, we can perform system optimization with a small number of experimental points, and construct precise regression model for highly non-linear domain. The error to compared with analysis result is only $0.01\%$ and it is demonstrated that present method can be applied more practical design optimization problems with many design variables.

• Journal of the Korean Institute of Gas
• /
• v.24 no.6
• /
• pp.70-76
• /
• 2020

In this study, we suggested the direction to lower the risk by analyzing the risk factors for each process for the hydrogen refueling station to be installed in Chungju. HyRAM, one of the quantitative risk assessment tools for hydrogen gas, was used to analyze the hazards. By evaluating the frequency of accidents and consequences for each process, the most dangerous processes and accident factors were presented, and the risk mitigation factors were synthesized. Hydrogen refueling stations are currently in the global infrastructure expansion period, and the lack of accident data could be an alternative to this risk assessment and is expected to be used as a reference for the future expansion of hydrogen refueling stations.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.16
• /
• pp.7243-7248
• /
• 2015

Background: Monocyte chemoattractant protein-1 (MCP-1) is a major chemokine thought to be responsible for monocyte and T-lymphocyte recruitment in acute inflammatory conditions and recruitment of macrophages in tumors. It is also implicated in cardiovascular disease, rheumatoid arthritis and chronic obstructive pulmonary disease. The aim of the present study was to investigate the correlation between MCP-1 -2518 A/G polymorphism and breast cancer risk in patients from Amritsar city of Punjab state in North-West India. Materials and Methods: We screened DNA samples of 200 sporadic breast cancer patients and 200 age and gender matched unrelated healthy individuals for MCP-1 -2518 A/G polymorphism using the PCR-RFLP method. Results: A significantly increased frequency of the GG genotype was observed in patients as compared to controls. Individuals carrying the MCP1 -2518GG genotype had a two fold risk for breast cancer (OR=2.06, 95%CI, 1.06-3.98; p=0.03). Genetic models analysis revealed a significant association between MCP-1 -2518 A/G polymorphism and cancer risk in homozygous co-dominant (OR=2.06, 95%CI, 1.06-3.98; p=0.03) and recessive (OR=1.97, 95%CI, 1.05-3.70; p=0.03) models. Conclusions: We conclude that the GG genotype of the MCP-1-2518 A/G polymorphism is associated with increased risk to breast cancer in Punjab, North-West India.