• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.11
• /
• pp.1527-1533
• /
• 2001

Garole is a prolific, rare, less known and small size Indian sheep breed found in low and humid Sunderban region of West Bengal. Although information on stored Garole ram liquid semen upto 24 h is available, but there is a need to further investigate the short-term and long-term preservability of Garole ram semen for extensive utilization of this valuable germplasm by artificial insemination. The aim of the present study was to apply computer-assisted sperm analysis technique for assessing the motion characteristics of Garole ram semen stored (i) in liquid state at refrigeration temperature for short-term preservation upto 48 h and (ii) in frozen state at $-196^{\circ}C$ for long-term preservation after packaging in mini straws. Short-term preservation had a significant effect on motility (p<0.01) as the motility progressively decreased from 90.1% at 0 h to 85.5% and 73.2% after 24 and 48 h of storage, respectively. Although the decline in rapid moving sperms was also significant (p<0.01) on storage but the decrease was more pronounced at 48 h as compared to 24 h of storage period. Storage of chilled semen had also a significant effect on % linearity (p<0.05), % straightness (p<0.01), sperm velocities (p<0.01), amplitude of lateral head displacement (p<0.01) and beat frequency (pO.Ol) of spermatozoa. The replication had a significant effect for all the variables except average path and straight line velocity. However, the interactions of short-term storage and replication were non-significant for most of the variables except % of medium moving sperms, sperm velocities and beat frequency. On long-term preservation of Garole ram spermatozoa under controlled conditions the mean post-thaw recovery of 70.4 and 71.4% motile spermatozoa was achieved having 48.8 and 48.9% of rapidly motile spermatozoa, respectively in both the replicates. The effect of replication on cryopreservation was significant (p<0.05) on amplitude of lateral head displacement and beat frequency, but there was no significant effect on motility, rapidly motile spermatozoa, linearity, straightness and sperm velocities of frozen-thawed spermatozoa. It can be concluded from these results that an average 70% motility can be achieved on storage of Garole ram semen in chilled liquid state upto 48 h or in liquid nitrogen after freezing under controlled conditions in straws. However, further studies are required to evaluate the fertility of short-term and long-term preserved Garole ram semen for extensive use of this prolific sheep breed.

• Korean Journal of Ecology and Environment
• /
• v.50 no.3
• /
• pp.314-324
• /
• 2017

In order to consider application and evaluation of value and class of domestic wetland, we investigated 146 wetlands located Gyeongsangnam-do using Rapid Assessment Method (RAM). We utilized Self-Organizing-Map (SOM) to analysis relationship between evaluation index and land coverage ratio surrounding wetland. Among total 8 evaluation index, 'Fish and herptile habitat' and 'Aesthetic value' were higher, most of the wetlands evaluated as 2, 3 grade. Result of SOM analysis, 'vegetation diversity and wild animals habitat' is negatively related to the 'Fish and herptile habitat', because fishs were not prefer habitat excessively occupied by plant. However, high vegetation diversity can be support high score of 'Aesthetic' in wetland. Also, 'Erosion control' and 'Flood storage and control' were closely related, wetlands with high score of 'Erosion control' have high score of 'Flood storage and control'. When applied RAM in domestic wetland, six out of 6 evaluation index induced biased results, the index of RAM need a little change as some new or modify evaluation index. Therefore, we consider to need adjustable, subdivide, and actualization of some evaluation index for application of RAM in domestic wetlands. Consequently, wetland assessment and class using RAM can be utilized as important indicate for conservation and management of wetland, and contributed greatly to maintain biodiversity include to endangered species by preserving remaining wetland.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1590-1594
• /
• 2007

This paper describes a case study on dynamic characteristics analysis of a 5-axis multi-tasking machine tool of ram-head typed. Natural frequency and corresponding vibration modes of the machine tool structure were obtained by using both FEM modal analysis and an experimental modal test(impulse hammer test). Both the theoretical and experiment analysis results showed good agreement with each other. Finally, some discussion and review, from the view point of resonance vibration and/or mode coupled chatter, were made based on the analysis results.

• Journal of computational fluids engineering
• /
• v.5 no.2
• /
• pp.55-63
• /
• 2000

In this paper, the numerical study has been done for the improvement of the superdetonative ram accelerator performance and for the design optimization of the system. The objective function to optimize the premixture composition is the ram tube length, required to accelerate projectile from initial velocity V/sub 0/ to target velocity V/sub e/. The premixture is composed of H₂, O₂, N₂ and the mole numbers of these species are selected as design variables. RSM(Response Surface Methodology) which is widely used for the complex optimization problems is selected as the optimization technique. In particular, to improve the non-linearity of the response and to consider the accuracy and the efficiency of the solution, design space stretching technique has been applied. Separate sub-optimization routine is introduced to determine the stretching position and clustering parameters which construct the optimum regression model. Two step optimization technique has been applied to obtain the optimal system. With the application of stretching technique, we can perform system optimization with a small number of experimental points, and construct precise regression model for highly non-linear domain. The error compared with analysis result is only 0.01% and it is demonstrated that present method can be applied to more practical design optimization problems with many design variables.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.55 no.4
• /
• pp.199-203
• /
• 2006

This paper presents an ASER (Accelerated Soft Error Rate) integral model. The model is based on the facts that the generated EHP/s(electron hole pairs) are diminished after some residual range of the incident alpha particle, where residual range is a function of the incident angle and the capping layer thickness over the semiconductor junction. The ASER is influenced by the flux of the alpha particles, the junction area ratio, the alpha particle incident angle when the critical charge is same as the collected charge, and the sizes of the alpha source and the chip. The model was examined with 8M static RAM samples. The measured ASER data showed good agreement with the calculated values using the model. The ASER decreased exponentially with respect to the operational voltage. As the capping layer thickness increases up to $16{\mu}m$, the ASER increases, and after that thickness, the ASER decreases. The ASER increased as the depth of BNW increased from $0{\mu}m\;to\;4{\mu}m$. and then saturated. The ASER decreased as the node capacitance increased from 2fF to 5fF.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.4
• /
• pp.17-24
• /
• 2006

Hydrodynamic ram of aircraft fuel tanks is one of main ballistic battle damages of an aircraft and has great importance to airframe survivability design. Basic concept, physics and research history of hydrodynamic ram are investigated. The penetration and internal detonation of a simple fuel tank and ICW(Intermediate Complexity Wing) are analyzed by computational method. Structural rupture and fluid burst are analytically realized using general coupling and coupling surface interaction. The results such as fluid pressure, tank stress and displacement are shown and future research chances are suggested based on the study.

• Journal of Korean Society of Water and Wastewater
• /
• v.25 no.5
• /
• pp.667-679
• /
• 2011

In this study, the influences of pollutant from Dae-po Stream and So-gam Stream located at the downstream of Nak-dong River on the water quality at Mul-geum water intake station were analyzed using RAMS model. Field measurements of velocity by ADCP, and water quality distribution of BOD and TP by water sampling were carried out to present the input and verification data for numerical simulations. The comparison between RAM2 and ADCP measurement, which aimed for the analysis of 2-D velocity distribution around Mul-geum water intake station showed that two results matched well along the spanwise direction. The prediction of pollutant concentration by RAM4 agreed fairly well with the measured data except for the points nearby right banks in the vicinity of tributary pollutant source. Flushing effect by the increase of mainstream discharge in Nak-dong River was analyzed to provide the damage mitigation in preparation for the accidental water pollution. With increasing mainstream discharge, high velocity and increased water quantity induced increasing dilution effect, thereby decreasing the inflow pollutant concentration rapidly.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.11a
• /
• pp.437-438
• /
• 2008

To improve efficiency and allowable life of gas turbine and ram jet, the proper cooling techniques are needed. It is required not only the basic research of variable cooling techniques but also analysis of real operating conditions when we design the cooling system. From the present experimental and analytical results, we can predict the thermal stress and allowable life. This design process is for a thermal design technique that is the most foundational design technique to improve the efficiency of gas turbines and ram jets

• Journal of the Korean Society for Heat Treatment
• /
• v.34 no.4
• /
• pp.185-190
• /
• 2021

The extrusion experiments using the 7075 aluminum billet have been performed to investigate the effects of die cooling and ram speed on the occurrence of surface defects on the extrudate. The purpose of die cooling was to suppress overheating of the extrudate at the moment of extrusion. In the present die cooling system, liquid nitrogen has been injected in to the die and sprayed to the surface of extrudate. Ram speed was either kept or varied in the range of 1.1~1.7 mm/sec. throughout one extrusion shot to check the occurrence of surface defects. Every extrusion started at a ram speed of 1.25 mm/sec. The temperature of extrudate was measured using a laser thermometer. The 7075 billet of 180 mm in diameter and 550 mm in length was preheated at 390℃ and extruded to get a single plate of 8000 mm in length, 150 mm in width and 10 mm in thickness. Each extrudate was checked by eye to find the surface defects. The microstructures were obtained in the specimen cut from each corner of the extrudate using the EBSD micrographs.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.1387-1391
• /
• 2007

In this study, water quality prediction that is necessary to water quality forecasting system is performed using 2-D river analysis models RMA-2 and RAM4. RAM4 is suitable to water quality forecasting system cause it is possible to put in the pollutants as a mass type boundary condition. Instant injections of pollutants at Yongdamdaegyo Bridge in Namhangang River are simulated and the behavior of pollutant cloud is observed. The effects of water quality accident to Paldang 2 water intake plants in Paldangho Lake is analyzed with time variation. And extra flow simulation is performed for mitigation of pollution. Several cases of water quality forecasting system at home and abroad are investigated and the direction of water quality forecasting system is presented.