• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.1
• /
• pp.211-220
• /
• 2018

The standard data link layer encryption provided by CCSDS has a structure that encodes HDLC frame into it using an AES algorithm. However, CCSDS is standard method has a structure in which the receiving side cannot request a re-activation when noise interference occurs over an unstable channel. SES Alarmed has a structure that enables the receiving side to additionally detect errors and perform re-activation requests in an operational structure similar to that of link encryption in CCSDS. The SES Alarmed related paper was intended to identify the optimum range of thresholds and identify data corruption due to channel noise. In this paper, the focus was on reducing the re-activation process if the HDLC frame, excluding the password Sync code, consistently exceeds any threshold levels. The HDLC frame order was changed and the results of using SES Alarmed were proposed and compared.

• Journal of Digital Convergence
• /
• v.12 no.10
• /
• pp.283-289
• /
• 2014

Personal rapid transit(PRT) systems have been highlighted in future transportation developments as a result of their potential as sustainable and eco-friendly transport solutions that provide demand-responsive mobility services. One of the most important characteristics of the personal rapid transit system(PRT) is that it can be constructed and operated at a low cost. A fundamental study on the alignment of the PRT guideway considering running stability was conducted in the present study. In addition, a parameter analysis of the major alignment design variables such as curve radius, transition curve length and cant was performed by vehicle dynamic analysis and optimum guideway alignments were proposed. The analysis results suggested that the theoretical values were satisfied and also confirmed the possibility of reducing the standard.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.15 no.3
• /
• pp.1-9
• /
• 2011

The purpose of this study is to examine the dynamic characteristics of low, medium and high speed Maglev trains and guideways through dynamic interaction analysis. The coupled dynamic equations of motion for a vehicle of 10-dof and the associated guideway girders are developed by superposing vibration modes of the girder itself. The controller used in the UTM-01 Maglev vehicle is adopted to control the air gap between the bogie and guideway in this study. The effect of roughness, the guideway deflection-ratio and vehicle speed on the dynamic response of the maglev vehicle and guideway are then investigated using the 4th Runge-Kutta method. From the numerical simulation, it is found that the air gap increases with an increase of vehicle speed and the roughness condition. In particular, the dynamic magnification factor of the guideway girder is small at low and medium speeds, but the factor is noticeable at super-high speeds.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.11
• /
• pp.7949-7956
• /
• 2015

This paper introduced the RAR(Reinforced Abutment for Railroads) to reduce settlement of transitional zone and horizontal displacement of abutment by constructing backfill before abutment. We expect that it has more economical and better performance which was validated by numerical analyses. First, transitional zone settlements and horizontal displacements of existing abutment were evaluated for various heights and ground conditions by using finite element analysis program. Then, numerical analyses of it under the same conditions were performed and its results were compared with existing abutment's ones. From the numerical analysis, we found that the responses(settlement and horizontal displacement) of transitional zone of the RAR is about 20% and 34% of one of existing abutment due to the effect of backfill stabilizing. We expected that the RAR having small foundations could be economic way to construct abutment with the control of responses such as, settlement, horizontal displacement, and earth pressure.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.5
• /
• pp.440-446
• /
• 2008

To manufacture the MLCC with X7R for high voltage stability, $BaTiO_3-MgO-MnO_2-Y_2O_3$ with $(Ba_{0.4}Ca_{0.6})SiO_3$ glass frit was formulated. Based on this composition, the addition of $Er_2O_3$ showed that TCC(Temperature Coefficient Capacitance) at $85^{\circ}C$ was improved from 5 % to ${\sim}0\;%$, but the dielectric constant and IR (Insulation Resistance) were decreased. The glass frit improved the dielectric constant and IR, so the appropriate contents of $Er_2O_3$ and glass frit were 0.6 mol% and 1 wt%, respectively. It showed that the dielectric constant and RC constant were 2,550 and 2,000 (${\Omega}F$), respectively in the sintering condition at $1250^{\circ}C$ in PO2 $10^{-7}$ Mpa. The MLCC with $3.2{\times}1.6$ (mm) size and $1\;{\mu}F$ was also suited for X7R with the above composition.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.7 no.2
• /
• pp.73-78
• /
• 2009

The decay heat of Cs and Sr contained in a LiCl waste salt, generated from an electrolytic reduction process in pyroprocessing of spent nuclear fuel, has been calculated. The calculation has been carried out under some assumptions that most of the LiCl waste is purified and recycled to main process, and the residual is fabricated to make a waste form. As a result, the decay heat from daughter nuclides such as Ba and Y seems to be maximum 4.6 times higher than that from their parent nuclides such as Cs and Sr. The thermal release from Cs and Sr in the LiCl waste is the maximum around the first one month, so an cooling system operation for some time at the beginning would be suggested to control a rapid increase in the temperature of the LiCl waste salt.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.2
• /
• pp.357-362
• /
• 2017

Among the lithium metal oxides for asymmetric hybrid supercapacitor, $Li_4Ti_5O_{12}(LTO)$ is an emerging electrode material as zero-stain material in volume change during the with the charging and discharging processes. The pulverized LTO powder was observed to show the enhanced capacity from 120 mAh/g to 156 mAh/g at C-rate (10, 100 C). Hybrid supercapacitor module(48V, 416F) was fabricated using an asymmetric hybrid capacitor with a capacitance of 7500F. As a result of the measurement of C-rate characteristics, the module shows that the discharge time is drastically reduced at more than 50C, and the ESR and voltage drop characteristics are increased. The energy density and power density were reduced under high C-rate conditions. When designing asymmetric hybrid supercapacitor module, the C-rate and ESR should be considered As a result of measuring the 5 kw UPS, it was discharged at the current of 116A~170A during the discharge in the voltage range of 48V~30V, and the compensation time at discharge was measured to be about 33.2s. Experimental results show that it can be applied to applications related to stabilization of power quality by applying hybrid supercapacitor module.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.12
• /
• pp.2891-2898
• /
• 2013

CCSDS Standard is widely used in international space telecommunication area. In this standard, Encryption is realized using a unique hierarchical encryption protocol and satisfied security requirements of communication channels. For synchronization, encryption sync is attached in the beginning of encrypted data. But exceptional case(timing jittering, abnormal system shutdown, etc.) is occurred, receiving equipment cannot decrypt received data. In this paper, we propose a SES Alarmed link encryption synchronization method for sending warning signal to the transmitter when some problems have been occurred during the transmission and we also suggest optimum conditions for SES Alarm signal through performance analysis.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.12
• /
• pp.2883-2890
• /
• 2013

Correlation power analysis attack takes place at the point of operating a known value and a hidden value from a master key as an input. The hidden value can be found by analyzing a correlation between the result value and the measured power signal during the operation, witch makes it possible to estimate the master key from the hidden value. However, the correlation power analysis attack can be very difficult by changing the conditions that make the power analysis possible, when the known value and the operation is hidden, when it is impossible to estimate the master key from the hidden value, or when the correlation between the result value and the power signal is considerably lowered. Therefore this study proposes a software countermeasure using a secrete intermediate key to witch these conditions are applied.

• Journal of the Korean Magnetics Society
• /
• v.21 no.6
• /
• pp.208-213
• /
• 2011

We calculated the EPR (electron paramagnetic resonance) line-shape function. The line-widths of a -doped single crystal was studied as a function of the temperature with 0.5 and 2 at. at a frequency of (X-band). The line-width decreases with increasing temperature, such temperature behavior of the line-width can indicate a motional narrowing of the spectrum, when impurity ions substitute for host ions in an off-center position, and thus there can be fast jumping of dipoles between several symmetrically equivalent configurations. Therefore, the present technique is considered to be more convenient to explain the resonant system as in the case of other optical transition problems.