• Journal of Electrical Engineering and Technology
• /
• v.8 no.4
• /
• pp.808-812
• /
• 2013

Multilayer capacitors with high ripple current and high capacitance were manufactured. The electrical properties of these capacitors were characterized for potential application for DC-link capacitors in hybrid electric vehicle inverters. Internal electrode structures were designed to achieve high capacitance and reliability. A single multilayer capacitor showed $0.46{\mu}F/cm^3$ of capacitance, 0.65% of dielectric loss, and 1450 V to 1650 V of dielectric breakdown voltage depending on the design of the internal electrode. The capacitor module designed with several multilayer capacitors gave a total capacitance of $450{\mu}F$, which is enough for hybrid electric vehicles. In particular, an equivalent series resistance of $4.5m{\Omega}$ or less will result in 60 $A_{rms}$, thereby reaching the allowed ripple current for hybrid electric vehicles.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.12
• /
• pp.1740-1744
• /
• 2017

This paper describes the preparation and characteristics of a battery capacitor and module for solar power system. A cylindrical 30,000F battery capacitor ($60{\times}138mm$) was assembled by using the $LTO(Li_4Ti_5O_{12})$ electrode as an anode and $NMC(LiNiMnCoO_2)-LCO(LiCoO_2)$ as a cathode. The battery capacitor has reduced energy density and power density under high CC(constant current) and CP(constant power) conditions. Battery capacitor module (16V, 11Ah) was fabricated using an asymmetric hybrid capacitor with a capacitance of 30,000F. In order to determine the characteristics of the battery capacitor Module for solar power system, battery capacitor cells were connected in series with active balancing circuit. As a result of measuring the 100w LED lamp, it was discharged at the voltage of 15V~10V, and the compensation time at discharge was measured to be about 4979s. Experimental results show that it can be applied to applications related to solar power system by applying battery capacitor module.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.11
• /
• pp.1578-1586
• /
• 2015

Personal rapid transit (PRT) is getting attention as a new form of transportation. It is energy efficient and provides the high level of passenger service. In this study, the dynamic PRT dispatching and routing problem is dealt with. Passengers request transportation service on a complex network, and an operating system monitors passenger arrivals and coordinates vehicles in real time. A new online dispatching and routing algorithm is proposed, which minimizes the total travel distance of vehicles and the waiting time of passengers. The algorithm dispatches vehicles by considering multiple vehicles' state and multiple passengers at the same time. In particular, finding the shortest-time path is attempted by taking into account the future congestion on lanes. Discrete-event simulation is employed to validate the performance of the proposed algorithm. The results show the algorithm in this study outperforms others.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.319-320
• /
• 2006

In order to improve the ESD(Electrical Static Discharge) resistance of multilayer chip varistors, we have investigated ZnO-$Pr_6O_{11}$ based chip varistor by applying tape casting technology, whose fundamental component were ZnO : $Pr_6O_{11}$ :$Co_3O_4$: $Y_2O_3$: $Al_2O_3$=93.67: 2.53:2.53:1.25 : 0.015 (wt %). The effect of sintering condition on the multilayer chip varistors and electric properties was studied. The electrical properties and ESD resistance of multilayer chip varistor could be influenced the sintering temperature and condition.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.6
• /
• pp.495-500
• /
• 2009

The ceramic($BaTiO_3$)-polymer(epoxy) composites have been widely investigated as dielectric materials for embedded capacitors in printed circuit boards (PCBs). The dielectric properties of $BaTiO_3$/epoxy composites prepared using the agglomerated $BaTiO_3$ particles were investigated in the present study. The dielectric constants of the composites prepared using the agglomerated $BaTiO_3$ particles were about 2 times higher than those of the composites with the dispersed $BaTiO_3$ particles. The insulation resistance of the composites prepared using the agglomerated $BaTiO_3$ particles were lower than those of the composites with dispersed $BaTiO_3$ particles. As a result, there is tradeoff between high dielectric constant and insulation resistance in the $BaTiO_3$/epoxy composites. So it is important to select proper agglomerated or dispersed $BaTiO_3$ particles in accordance with needs.

• Land and Housing Review
• /
• v.11 no.1
• /
• pp.67-78
• /
• 2020

The aim of this study is to minimize the various social problems caused by the growing number of vacant houses in the urban areas and suggest ways to improve the legal and institutional system for promoting the maintenance and utilization of vacant houses. Due to changes in social conditions, the vacant houses continue to increase, and urban regeneration is emerging as a policy tool for renovating old and deteriorating built-up areas. In the face of the necessity of the managing vacant houses and its surrounding areas, it was suggested that vacant housing should be defined as "housing and buildings", not just "housing", since there are limitations on the maintenance of them. In addition, statistics on vacant houses are causing confusion because of the difference between surveyed data and vacant houses, which are recognized as problems in urban areas. Therefore, it was suggested to improve the accuracy and reliability of vacant housing statistics. In order to promote the maintenance and utilization of vacant housing, it was proposed an amendment of vacant housing-related laws that grant substantive tax benefits to enable more active participation of vacant homeowners and people who participate in vacant housing maintenance.

• Textile Coloration and Finishing
• /
• v.7 no.4
• /
• pp.74-86
• /
• 1995

Antibacterial and deodorization properties of silk fabrics dyed with Sappan wood are investigated by Halo, Shake flask, Bioassay and Detection column methods.The results are obtained as follows; 1. Although K/S values increase with Al mordant and concentrate concentrations, these are decreased in 10% Al mordant concentration in case of 4mlg dye concentration. 2. Reduction ratios of bacteria increase with K/S values in various tests. 3. When undyed silk fabrics are treated with Al mordant, reduction ratios of bacteria are not varied with Al mordant concentrations. 4. Deodorization property of Al pre-mordanted dyeing silk fabrics is better than one of unmordanted dyeing and raw silk fabrics. 5. Antibacterial properties of Cu and Cr mordanted dyeing fabrics are better than ones of the dyeing fabrics treated with the other mordants. 6. Natural dyes extracted from Sappan wood show the good antibacterial and deodorization properties, and colorant among various components contained in Sappan wood has a excellent antibacterial and deodorization properties.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.2
• /
• pp.53-61
• /
• 2016

Extracting focused object with saliency map is still remaining as one of the most highly tasked research area around computer vision for it is hard to estimate. Through this paper, we propose enhanced object extraction method based on multi-channel saliency map which could be done automatically without machine learning. Proposed Method shows a higher accuracy than Itti method using SLIC, Euclidean, and LBP algorithm as for object extraction. Experiments result shows that our approach is possible to be used for automatic object extraction without any previous training procedure through focusing on the main object from the image instead of estimating the whole image from background to foreground.

• Journal of Digestive Cancer Research
• /
• v.4 no.2
• /
• pp.99-106
• /
• 2016

Minimally invasive surgery for gastric cancer has increased in popularity during the last two decades mainly in the Asia for patients with early-stage cancer. Nevertheless, the development of laparoscopic surgery for gastric cancers in the Western world has been slow because of the advanced stage at diagnosis for which LG is not yet considered an acceptable alternative to standard open surgery. RAG has been reported as a safe alternative to conventional surgery for treating of early gastric carcinoma. We assess the current status of robotic surgery in the treatment of gastric cancer focusing on the technical details, postoperative outcome, oncological considerations and future perspectives. In gastrectomy the biggest advantage of the robotic approach is the ease and reproducibility of lymphadenectomy. Reports also show that even the intra corporeal digestive restoration is facilitated by use of the robotic approach, particularly following TG. Additionally, the accuracy of robotic dissection is confirmed by decreased blood loss in comparison to conventional laparoscopy. The learning curve and technical reproducibility also appear to be shorter with robotic surgery and, consequently, robotics can help to standardize and diffuse minimally invasive surgery in the treatment of gastric cancer. While published reports have shown no significant differences in surgical morbidity, mortality, or oncological adequacy between robot-assisted and conventional gastrectomy. There are some advantages in terms of postoperative recovery of patients after robotic surgery. More studies are needed to assess the true indications and oncological effectiveness of robotic use in the treatment of gastric carcinoma.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.3_4 s.141
• /
• pp.449-461
• /
• 2005

The purpose of this study is to rediscover the hidden value of non-mainstreamers style which has been overlooked for the past decade by investigate the aesthetics and formative features of the Grunge fashion. The Grunge fashion was derived from explosive popularity of the early 90's grunge music. Grunge was the alternative anti-thesis against mainstream pop music and anti-fashion against mainstream fashion. Dirty, rubbish grunge style of the poor street youth and grunge musicians have raised to the high fashion by designers. And These trial of designers made people to notice the value of the non-mainstreamers street style like grunge. Actually, the grunge brought the shock with many argument to the 90's fashion field. But now, It became the classic of the street fashion. And It has potent influence on the music, culture and high fashion. The Grunge is a kind of links between music and fashion, street fashion and high fashion, sub culture and mainstream culture, the past and now. Grunge isn't only a fashion of appearance. It is the attitude of wearing clothes and living a life. Variety grunge style in the international street fashion, high fashion, typical musicians's fashion of the 1990's and the 2000's was researched for this study. These materials were gathered from music magazines, fashion magazines, movies, musics and books. As a results of analysis, Grunge has the formative features like mix & match, layering, patchwork, primitive edge, rag, retro, recycle, kinderwhore, sneer scribbling, disheveled hair. Grunge also has the Aesthetic features like the beauty of $disorder{\cdot}\;disharmony{\cdot}\;incompleteness{\cdot}\;kitsch{\cdot}\;poverty{\cdot}\;alternative{\cdot}\;eclectic{\cdot}$symbiosis. For the last 10 years, These features changed our fashion be more pluralistic and dynamic.