• Proceedings of the KSRS Conference
• /
• 2000.04a
• /
• pp.79-84
• /
• 2000

해양 영역에 대한 SAR(Synthetic Aperture Radar) 자료는 좋은 해상도로 기상조건이나 주야에 상관없이 wind vector를 구할 수 있는 장점이 있다. 해안지역의 scatterometer 자료는 육지의 영향으로 인하여 정확한 자료를 얻을 수 없지만, SAR자료를 이용하면, Scatterometer에 비해 좋은 해상도로 해안지역의 wind vector 추출이 가능하다. 본 연구에서는 SAR 자료로부터 풍속을 추출할 수 있는 CMOD_4와 CMOD_IFR2 알고리즘을 사용하였다. 이 알고리즘들은 정확한 sigma-naught 값과, 풍향, 그리고 local incidence angle을 입력변수로 요구한다. CMOD 알고리즘들은 ERS-1/2와 같이 C-band, VV-polarization을 위해 개발된 알고리즘이므로, C-band, HH-polarization을 가진 RADARSAT 자료에 바로 적용할 수가 없다. 이것을 해결하기 위해 본 연구에서는 두 CMOD 알고리즘을 몇 가지 polarization ratio와 같이 적용하여 보았다. 각 연구지역에 해당하는 자료에는 제주도 주변의 Fine mode 자료, 서해안과 제주도 근해의 Standard mode 자료, 그리고 동해안 지역의 ScanSAR 자료 등이다. 여러 가지 Polarization ratio와 CMOD 알고리즘의 조합, 그리고 2-DFFT로부터 추출된 풍향으로부터 각 연구지역의 풍속은 가까운 기상관측소 및, 부이의 관측값과 비교하였다. 그 결과 Fine mode 자료로부터 추출된 풍속은 실제 관측 값보다 항상 상당히 높게 나타났지만, Standard mode 나 ScanSAR 자료로부터 추출된 풍속은 현지 기상관측소 관측 값과 잘 일치한다.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.2 no.2
• /
• pp.38-48
• /
• 1999

The oil spill accident near Goeje Island on April 3, 1997 was analyzed using two RADARSAT SAR images. The first scene was acquired 3 days after the accident as an extended low beam mode and the second scene was acquired 12 hours after the first scene as a standard beam mode. The two scenes showed slicks not only by oil spills but also by oil spill look-alikes caused by wind sheltering, low wind, natural film, and etc. These slicks were analyzed and classified, and natural films produced from aquaculture farms around Goeje Island were also suggested as a strong candidate for slicks on SAR images. The study with two SAR imags indicated the oil spill patterns which spreaded to the southwest immediately after the accident and switched the direction to the east. The spreading patterns shown in two SAR images also showed good agreement with in-situ observations.

• Proceedings of the KSRS Conference
• /
• v.2
• /
• pp.856-859
• /
• 2006

In river with bar, the characteristics of its physical conditions have a close relationship with bar morphology. In this paper, a monitoring approach of bar transformation in the Han River Estuary is presented using RADARSAT/SAR Images. The estuary is divided into North and South Korea and its area is blocked by CCL(Civil Control Line). Satellite remote sensing, therefore, is uniquely suited to monitoring bar transformation. Based on SAR signatures for bars, bar transformation is investigated from 2000 to 2005, and monitoring of suspended-silt transportations from terrestrial runoff is tried to understand the morphology during the events of severe rain storm. SAR data did not reveal clearly the bar locations because of most of data acquisitions during high tides from 6.8 m to 9.0 m. Even though the problem, it could be said that in the estuary vegetated area and natural levees are developed well, but bars and shifted after an event like a flood. It is also showed that suspended solids such as silt transported through the estuary could contribute highly to a sedimentation environment around Incheon.

• Proceedings of KOSOMES biannual meeting
• /
• 2004.11a
• /
• pp.43-47
• /
• 2004

Two different sensors (here, KOMPSAT and RADARSAT) are considered for ship detection, and are used to delineate the detection performance for their data The experiments are set for coastal regions of Mokpo Port and Ulsan Port and field experiments on board pilot boat are conducted to collect in situ ship validation information such as ship type and length This paper introduce mainly the experiment result of ship detection by both RADARSAT SAR imagery and land-based RADAR data, operated by the local Authority of South Korean, so called vessel traffic system (VTS) radar. Fine imagery of Ulsan Port was acquired on June 19, 2004 and in-situ data such as wind speed and direction, taking pictures of ships and natural features were obtained aboard a pilot ship. North winds, with a maximum speed of 3.1 m/s were recorded Ship's position, size and shape and natural features of breakwaters, oil pipeline and alongside ship were compared using SAR and VTS. It is shown that KOMPSAT/EOC has a good performance in the detection of a moving ship at a speed of kts or more an hour that ship and its wake can be imaged. The detection capability of RADARSAT doesn't matter how fast ship is running and depends on a ship itself, e.g. its material, length and type. Our results indicate that SAR can be applicable to automated ship detection for a VTS and SAR combination service.

• Proceedings of the KSRS Conference
• /
• 1999.11a
• /
• pp.148-153
• /
• 1999

Baikdu-san was a very active volcano during the Cenozoic era and is believed to be formed in late Cenozoic era. Recently it was also reported that there was a major eruption in or around 1002 A.D. and there are evidences which indicate that it is still an active volcano and a potential volcanic hazard. Remote sensing techniques have been widely used to monitor various natural hazards, including volcanic hazards. However, during an active volcanic eruption, volcanic ash can basically cover the sky and often blocks the solar radiation preventing any use of optical sensors. Synthetic aperture radar(SAR) is an ideal tool to monitor the volcanic activities and lava flows, because the wavelength of the microwave signal is considerably longer that the average volcanic ash particle size. In this study we have utilized several sets of SAR data to evaluate the utility of the space-borne SAR system. The data sets include JERS-1(L-band) SAR, and RADARSAT(C-band) data which included both standard mode and the ScanSAR mode data sets. We also utilized several sets of auxiliary data such as local geological maps and JERS-1 OPS data. The routine preprocessing and image processing steps were applied to these data sets before any attempts of classifying and mapping surface geological features. Although we computed sigma nought ($\sigma$$^{0}$) values far the standard mode RADARSAT data, the utility of sigma nought image was minimal in this study. Application of various types of classification algorithms to identify and map several stages of volcanic flows was not very successful. Although this research is still in progress, the following preliminary conclusions could be made: (1) sigma nought (RADARSAT standard mode data) and DN (JERS-1 SAR and RADARSAT ScanSAR data) have limited usefulness for distinguishing early basalt lava flows from late trachyte flows or later trachyte flows from the old basement granitic rocks around Baikdu-san volcano, (2) surface geological structure features such as several faults and volcanic lava flow channels can easily be identified and mapped, and (3) routine application of unsupervised classification methods cannot be used for mapping any types of surface lava flow patterns.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.689-692
• /
• 2004

Hydrographic data obtained from several ship experiments have shown that internal waves are frequently observed in the East (Japan) Sea, mostly in the continental slopes located along the western side of the East Sea. It is well known that oceanic internal waves can be detected well in synthetic aperture radar (SAR) images. Interactions between surface capillary-gravity waves and horizontally varying surface currents induced by internal waves produce variations in sea surface roughness which can be detected by SAR. C-band SAR images from ERS, ENVISAT ASAR and RADARSAT have been used to study the characteristics of internal waves in the East Sea. The observed properties of internal waves from many SAR images were compared and verified from in-situ measurements and theories.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.14 no.2
• /
• pp.163-168
• /
• 2008

Ship detection from satellite remote sensing is a crucial application for global monitoring for the purpose of protecting the marine environment and ensuring marine security. It permits to monitor sea traffic including fisheries, and to associate ships with oil discharge. An automatic ship detection approach for RADARSAT Fine Synthetic Aperture Radar (SAR) image is described and assessed using in situ ship validation information collected during field experiments conducted on August 6, 2004. Ship detection algorithms developed here consist of five stages: calibration, land masking, prescreening, point positioning, and discrimination. The fine image was acquired of Ulsan Port, located in southeast Korea, and during the acquisition, wind speeds between 0 m/s and 0.4 m/s were reported. The detection approach is applied to anchoring ships in the anchorage area of the port and its results are compared with validation data based on Vessel Traffic Service (VTS) radar. Our analysis for anchoring ships, above 68 m in length (LOA), indicates a 100% ship detection rate for the RADARSAT single beam mode. It is shown that the ship detection performance of SAR for smaller ships like barge could be higher than the land-based radar. The proposed method is also applied to estimate the ship's dimensions of length and breadth from SAR radar cross section(RCS), but those values were comparatively higher than the actual sizes because of layover and shadow effects of SAR.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.667-670
• /
• 2005

Ground control points(GCPs) can be extracted from SAR data given precise orbit for DTM generation using optic images and other SAR data. In this study, we extract GCPs from ERS SAR data and SRTM DEM. Although it is very difficult to identify GCPs in ERS SAR image, the geometry of optic image and other SAR data are able to be corrected and more precise DTM can be constructed from stereo optic images. Twenty GCPs were obtained from the ERS SAR data with precise Delft orbit information. After the correction was applied, the mean values of planimetric distance errors of the GCPs were 3.7m, 12.1 and -0.8m with standard deviations of 19.9m, 18.1, and 7.8m in geocentric X, Y, and Z coordinates, respectively. The geometries of SPOT stereo pair were corrected by 13 GCPs, and r.m.s. errors were 405m, 705m and 8.6m in northing, easting and height direction, respectively. And the geometries of RADARS AT stereo pair were corrected by 12 GCPs, and r.m.s. errors were 804m, 7.9m and 6.9m in northing, easting and height direction, respectively. DTMs, through a method of area based matching with pyramid images, were generated by SPOT stereo images and RADARS AT stereo images. Comparison between points of the obtained DTMs and points estimated from a national 1 :5,000 digital map was performed. For DTM by SPOT stereo images, the mean values of distance errors in northing, easting and height direction were respectively -7.6m, 9.6m and -3.1m with standard deviations of 9.1m, 12.0m and 9.1m. For DTM by RADARSAT stereo images, the mean values of distance errors in northing, easting and height direction were respectively -7.6m, 9.6m and -3.1m with standard deviations of 9.1m, 12.0m and 9.1m. These results met the accuracy of DTED level 2

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.4
• /
• pp.589-593
• /
• 2013

Remote sensing of SAR images is suitable for sea ice observations to obtain the sea ice data if clouds or weather conditions change. There are various types of sea ice, classification results can be seen more easily to detect the change by types of sea ice. In this study, we classified the image by supervised classification method, which is minimum distance was used. Also, we compared the overall accuracy when compared to the results with classification result of SAR images and the result of texture images. When using Radarsat-2 texture images, the overall accuracy was the highest, generally, when using the SAR images had higher overall accuracy.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.15 no.2
• /
• pp.103-112
• /
• 2012

We demonstrate the preliminary results of ship detection application using synthetic aperture radar (SAR) and automatic identification system (AIS) together. Multi-frequency and multi-temporal SAR images such as TerraSAR-X and Cosmo-SkyMed (X-band), and Radarsat-2 (C-band) are acquired over the West Sea in South Korea. In order to compare with SAR data, we also collected an AIS data. The SAR data are pre-processed considering by the characteristics of scattering mechanism as for sea surface. We proposed the "Adaptive Threshold Algorithm" for classification ship efficiently. The analyses using the combination of the SAR and AIS data with time series will be very useful to ship detection or tracing of the ship.