• Title/Summary/Keyword: RAD7

검색결과 168건 처리시간 0.027초

시스템 동바리 수직재와 수평재 연결부의 휨강도와 회전 강성 평가 (Flexural Strength and Rotational Stiffness Estimation of Joint between Vertical and Horizontal Members in System Support)

  • 원정훈;이형도;최명기;박만철
    • 한국안전학회지
    • /
    • 제33권4호
    • /
    • pp.46-53
    • /
    • 2018
  • This study examined the maximum resistant moment and nonlinear rotational stiffness of wedge joint between the vertical and horizontal members of system supports. To examine the maximum resistant moment and propose the nonlinear rotation stiffness of wedge joint, 6 specimens were tested and additional 3 specimens, where the horizontal member was welded to the vertical member, were tested to compare the moment capacity of wedge joints. The average maximum moment in the tested wedge joint was 1.183 kNm which represented about 70 % of the maximum moment developed in the welded specimens. And, as simulating nonlinear rotational stiffness of the wedge joint, a tri-linear model was suggested. The rotational stiffness was estimated as 23.095 kNm/rad in first stage, 7.945 kNm/rad in second stage, and 3.073 kNm/rad in third stage. For the failure mode, the specimen with the wedge joint showed the failure of joint between vertical and horizontal members. However, the specimen with welded joint represented the yielding of horizontal members.

펄스감마선에 의한 DC/DC 컨버터의 Latch-up현상에 대한 연구 (The Study of Latch-up)

  • 오승찬;이남호;이흥호
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2012년도 춘계학술대회
    • /
    • pp.719-721
    • /
    • 2012
  • 본 시험은 군전자장비의 전원제어부품으로 사용되는 TPS54315소자에 대하여 과도방사선에 따른 과도응답특성인 Upset/Latch-up특성을 평가하기 시험으로 포항가속기 연구소내의 Test LINAC 조사시설을 이용하여 $1.43{\times}10^7$rad(si)/sec~$1.25{\times}10^8$rad(si)/sec 선량률 조건에서의 실측시험을 수행하였다. 시험결과 $1.0{\times}10^8$rad(si)/sec 이후 Latch-up 현상이 확인되었으며 연속펄스 인가 시 Latch-up상태에서 정상상태로 복귀하는 결과를 확인하였다. 또한 이러한 현상은 과도방사선에 의한 광전류가 내부전원 Reset로직을 트리거 시킴으로써 Latch-up상태에서의 전원바이어스를 일시적으로 차단함에 따라 발생된 것으로 본 실험을 통하여 Reset회로가 내장된 소자의 경우 일부 Latch-up현상과 동시에 Reset회로가 트리거 되는 경우 Latch-up상태에서 정상상태로 복귀되는 결과를 확인하였다.

  • PDF

TDM 방식의 2채널 광섬유 센서 배열 특성 연구 (Characteristics of 2-Channel TDM fiber-optic sensor array)

  • 이종길
    • 센서학회지
    • /
    • 제7권5호
    • /
    • pp.306-312
    • /
    • 1998
  • 다채널을 가진 광섬유 센서 시스템을 개발하기 위하여 이것의 기본적인 센서 배열로서 TDM(Time Division Multiplexing) 방식의 2채널 광섬유 센서 배열을 제작하여 그 특성을 실험으로 분석하였다. 2채널 배열의 위상구조는 Mach-Zehnder형 사다리 구조로 제작 되었고 감지 간섭계와 보상 간섭계가 있는 PMDI(Phase-Matched Differential Interferometer) 기법을 사용하여 배열의 신호처리를 용이하게 하였다. 신호처리는 합성 헤테로다인(Synthetic Heterodyne)을 이용한 신호처리 기법으로 2채널의 신호를 동시에 검출하였다. 실험 결과 각 채널의 감도는 센서 #1에서 ${\sim}60{\mu}rad/\sqrt{Hz}$ 센서#2에서 ${\sim}80{\mu}rad/\sqrt{Hz}$를 얻었으며, 상호 간섭량(crosstalk)은 -36dB로 측정되었다. 본 실험으로 TDM 방식으로 다중화 된 Mach-Zehnder형 사다리 구조 간섭계의 신호처리가 광섬유센서의 효율을 높이고 비교적 안정적으로 신호를 감지함을 확인하였다.

  • PDF

방사선 처리를 받은 흰쥐의 혈청내 스테로이드호르몬의 변화 (Change of Serum Steroid Level in the Whole-body Irradiated Rat)

  • 신장식;이영근;김문규;윤용달
    • Clinical and Experimental Reproductive Medicine
    • /
    • 제21권3호
    • /
    • pp.297-303
    • /
    • 1994
  • The effect of radiation on the steroidogenesis of rat ovary was investigated. For this purpose, female rats aged 7-8 weeks were exposed to a single dose of ${\gamma}$ radiation(320 rad or 800 rad) by the cobalt-60. At fourth(day of the first estrus) and eighth(day of the second estrus) days after irradiation, the concentrations of serum steroid hormones were determined by radioimmunoassays (RIA). The correlation between survival rate(Y) and radiation dose(X) was Y=-0.06X+100(r=0.89, n=10). Lethal dose$(LD)_{50(30)}$ and $LD_{20(30)}$ were 833.33rad and 333.33rad respectively. The weights of body and ovary was decreased significantly by the $LD_{50(30)}$ irradiation during the 4 days, but both weights were recovered at day 8. The serum levels of 17a-hydroxyprogesterone(170HP) and estradiol($E_2$) in the irradiated rats were not generally different from those of control. However, the levels of testosterone(T) and 19-norterstosterone(19NT) in the irradiated rat at $LD_{50(30)}$ and $LD_{20(30)}$ radiation doses were decreased, while progesterone levels in serum of the irradiated rats were slightly increased. These results suggest that irradiation may inhibit the first step of steroidogenesis, especially the conversion of P to T, in the rat ovary.

  • PDF

방사선이 조사된 생쥐 간에서 인삼추출물이 방사선 방어효과에 미치는 영향 (The Radioprotective Effect of Ginseng Extracts on the liver in Mice that was irradiated by radiation)

  • 고인호;장재철;고정삼
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제27권2호
    • /
    • pp.35-43
    • /
    • 2004
  • ICR mice(Takeda et al., 1981)계 수컷 쥐 (무게 $20{\sim}30g$)를 균등한 조사야 $20\;cm{\times}20\;cm$ (선량율 200 cGy/min)로 Linac 6Mev X선 치료 장치(NEC model)를 이용하여 각각 5 Gy씩 실온에서 전신조사 하였다. 6 Mev X선이 조사된 간에 대한 방사선 방어효과를 연구하기 위해서 실험동물 생쥐 5마리를 1군으로 하여 대조군(Co), 방사선조사군(Rad), 방사선 조사전 백삼투여군(WG+Rad투여군), 방사선 조사전 발효인삼투여군(FG+Rad투여군) 등 총 4개 군으로 실험군을 분류하였다. 또한, 대조군(Co), 방사선조사군(Rad)은 생리적식염수 0.1 ml/day를 경구투여 하였고, FG+Rad투여군은 방사선조사 전 7일 동안 발효인삼을 500 mg/kg/day로 생쥐에 경구 투여하였다. 그리고, WG+Rad투여군은 방사선조사 전 7일 동안 백삼을 50 mg/kg/day로 생쥐에 경구 투여하고 생쥐를 도살 16시간 전에 절식시킨 후 각 실험군을 경추탈구로 희생시키고 분석시료로 사용하였다. 생쥐 간에서의 황산화 효소(SOD, catalase) 활성도 변화, 과산화수소 함량변화를 생쥐의 인삼 전 처리 효과를 통해서 방사선 장해에 대한 발효인삼 및 백삼성분이 방어효과에 미치는 영향을 예측하기 위해 전신 X선 조사 후 2주간 연구한 결론은 다음과 같다. 1.방사선조사군(Rad)에서는 대조군(Co)에 비해 SOD, CAT의 효소활성이 감소하였다. 반면에 백삼(50 mg/kg/day)과 발효인삼 추출물(500 mg/kg/day)을 방사선 조사전 투여한 실험군에서 각각 방사선 조사군(Rad)에 비해 효소 활성도가 증가하는 경향을 보였다. 2. 방사선조사군(Rad)에서 과산화수소의 함량은 대조군(Co)에 비해 유의성 있게 증가하였다. 반면에 백삼과 발효인삼 추출물을 방사선 조사전 투여한 실험군에서는 방사선조사군(Rad)에 비해 과산화수소의 함량 생성이 유의성 있게 억제되였다. 3. 본 연구 결과로 볼 때 백삼과 발효인삼추출물은 방사선조사에 의해서 생긴 간세포의 장해에 대한 방어효과가 있었다. 이는 인삼추출물의 성분이 항산화효소(SOD, catalase)의 활성도증가와 과산화수소함량의 감소를 가져와 결과적으로 방사선 방어효과가 나타냄을 알 수가 있었다.

  • PDF

도마종목 Kasamatsu계의 Akopian 기술동작 분석 (Kinematic Analysis of Acopian in Vault)

  • 이순호;박종훈;이종훈
    • 한국운동역학회지
    • /
    • 제16권1호
    • /
    • pp.89-99
    • /
    • 2006
  • The study were to assess technical factors between the high score group and the low score group, from the subjects of 16 male national gymnasts, and to analyze the kinematical characteristic and main technical cause on technique of Akopian's 3D motion analysis of the male vaulting game in 2001 classification championship. The result of this study is this. There were not so much difference between the two groups in term; of the time of board contact, pre-flight, and total performance, but it takes shorter time when the players who are in the high point group take down the board, and they take long time for post-flight(p<.01). The high point group has a longer perpendicular distance in the moment of horse taking off, 0.05m on the average, than the low point group. The high point group shows 0.16m higher on the average than the other group in term; of the height of post-flight(p<.01). In the phase of board contact, the range of horizontal velocity at board take on were $7.66m/s{\sim}7.33m/s$, but there weren't significantly statistic differences between two groups. The hight score group were 0.68m/s faster than the low point group at the horizontal velocity at board take off event(<.05). About the average horizontal velocity of deceleration, AG1(-1.95m/s) reduces the speed more than AG2(-1.57m/s)(p<.05). And the hight score group were 0.37m/s faster than the low point group at the vertical velocity at horse take off event(<.05). When board taking off, the projectile angle of com were $38.7{\sim}37.8degree$ on the average. the comparative groups show almost same results. When horse taking off, the HPVy of the high point group were 37.6 degree which were a little higher than the low point group. The angular velocities of the players who takes on the horse with a right hand and then takes off with a left hand in the high point group were 14.97rad/sec, 10.82rad/sec in the low point group. However, the angular velocity of the players who takes on the horse with a left hand and then takes off on a right hand with the high point group were 14.97rad/sec, 15.56rad/sec in the low point group.

A New-Generation Sensorless Vector Control Scheme for Induction Motor Drive

  • Shinnaka, Shinji
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 1998년도 Proceedings ICPE 98 1998 International Conference on Power Electronics
    • /
    • pp.287-292
    • /
    • 1998
  • This paper presents some results of performance evaluation test via actual machines of a new hybrid vector control utilizing a new indirect orientation scheme and stable filter embedded direct orientation scheme for induction motors without speed or position sensor. It is shown through the test by 0.3(kW) and 3.7(kW) motors that the proposed sensorless vector control has the following high potentialities: 1) speed range is 0 to 600(rad/s) or more, 2) zero-speed command is accepted and settles the machines at a stable standstill with no vibration 3) it can make machines to track variable command of acceleration and deceleration $\pm$6,000(rad/s2), 4) it can make machines to drive directly load of at least 26 times larger inertia than that of the machine, 5) it can make machines to produce much larger torque than the rating in torque control mode even at standstill. The performance confirmed by the test is far away for previous schemes or sensorless drive apparatuses.

  • PDF

사람 T-임파구의 HPRT유전자에서 방사선 및 환경독성물질에 노출에 의한 돌연변이 빈도의 변화

  • 윤병수;조명행;이영순;김인규;이강석
    • 한국원자력학회:학술대회논문집
    • /
    • 한국원자력학회 1996년도 춘계학술발표회논문집(4)
    • /
    • pp.40-45
    • /
    • 1996
  • 사람 T-임파구에서 방사선 독성물질인 감마선과 화학적 독성물질인 PCP(pentachlorophenol)의 돌연변이 효과를 hprt (hypoxanthine phosphoribosyl transferase) 유전자의 돌연변이빈도로써 측정하였다. 감마선은 $^{137}$Cs원을 사용하여, 0 - 300 rads의 양으로 세포의 초기배양 시기에 조사하였으며, PCP는 역시 세포의 초기배양시 최종농도 0-100 ppm으로 24시간 투여 하였다. 양 돌연변이원은 hprt유전자를 돌연변이 시키어, 300rads의 조사는 대조군에 비하여 약 7.5배의 돌연변이빈도의 증가를 나타내었고, PCP 500 ppm의 처리는 대조군에 비하여 약 5배의 돌연변이빈도 증가를 나타내었다. 본 실험에 사용된 상이한 두 돌연변이원은 모두 비교적 정확한 용량-반응 관계를 보였으나, 환경독성물질들의 혼합효과에서 돌연변이원을 정성하기위하여 개선된 T-cell hprt clonal assay, 즉 reverse transcriptase/polymerase chain reaction 및 direct sequencing에 의한 mutational spectrum의 적용이 요구되었다.

  • PDF

인트라넷 구축 도구를 위한 프레임워크 모델러의 설계 및 구현 (Design and Implementation of a Framework Modeler for Intranet Construction Tool)

  • 이창목;유철중;장옥배;이상덕
    • 한국정보과학회논문지:컴퓨팅의 실제 및 레터
    • /
    • 제7권1호
    • /
    • pp.63-76
    • /
    • 2001
  • 객체지향 언어의 등장과 함께 재사용의 중요성이 증대되면서, 개발자는 기존에 있는 프레임워크를 재사용하기 위해 핫 스팟(Hot Spot)을 수정하여 개발자의 의도에 적합한 시스템을 구축함으로써 개발기간 단축은 물론 견고하고 안정적인 개발을 하고자 한다. 이러한 작업을 하기 위한 환경을 제공하는 도구가 RAD(Rapid Application Development) 도구이다. 객체지향 프로그램 개발자라면 RAD 도구의 필요성을 누구나 다 인식하고 있으며 여러 업체에서 이러한 RAD 도구를 개발하고 있다. 본 논문에서는 사용자 중심의 인트라넷환경 구축도구 기술개발의 일환으로 프레임워크를 기반으로 하는 프로그램 생성을 위한 모듈단위의 모델러를 설계 및 구현하였다. 본 모델러는 구현언어로 플랫폼에 독립적인 Java 언어를 사용하였고, 객체 다이어그래밍 기술을 포함하고 있는 OMT 에디터를 분석하여 기술을 적용하되 OMT 에디터에서는 지원하지 않았던 UML(Unified Modeling Language) 표기법을 지원하고 있으며, 기존의 MVC(Model-View-Controller) 구조가 가질 수 없었던 여러 뷰(View) 사이에 발생하는 메시지를 전달하는데 있어 Agent라는 설계 패턴을 개발하여 적용함으로써 본 도구를 이용하여 일관된 개발을 할 수 있도록 구조화하였다. 따라서 본 논문에서 설계 및 구현한 도구는 사용자의 요구사항 변경이나 기능확장시 보다 유연하게 대처할 수 있는 특징을 가지고 있다.

  • PDF