• Title/Summary/Keyword: R9

Search Result 12,835, Processing Time 0.037 seconds

Reynolds Number Effects on the Near-Wake of an Oscillating Airfoil, Part 2: Turbulent Intensity (진동하는 NACA 4412 에어포일 근접후류에서의 레이놀즈수 효과 2: 난류강도)

  • Jang,Jo-Won
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • v.31 no.8
    • /
    • pp.8-18
    • /
    • 2003
  • An experimental study is carried out to investigate the Reynolds number effects on the near-wake of an airfoil oscillating in pitch. An NACA 4412 airfoil is sinusoidally pitched about the quarter chord point between the angle of attack -6$^{\circ}$ and +6$^{\circ}$. A hot-wire anemometer is used to measure the turbulent intensity in the near-wake region of an NACA 4412 airfoil. The freestream velocities of present work are 3.4, 12.4, 26.2 m/s, and the corresponding Reynolds numbers are $5.3{\times}10^4,\;1.9{\times}10^5,\;4.1{\times}10^5$ and the reduced frequency is 0.1. Axial turbulent intensity profiles are presented to show the Reynolds number effects on the near-wake region behind an airfoil oscillating in pitch. All the cases in these measurements show that the turbulent intensities by the change of the Reynolds number are very large at the lowest Reynolds number $R_N=5.3{\times}10^4$; and are small at the other Reynolds number $(R_N=1.9{\times}10^5\;and\;4.1{\times}10^5)$ in the near-wake region. The significant difference of turbulent intensity between $R_N=5.3{\times}10^4,\;and\;1.9{\times}l0^5$ is observed. A critical value of the Reynolds number in the near-wake of an oscillating NACA 4412 airfoil which indicates laminar separation, no separation or turbulent separation exists in the range between $R_N=5.3{\times}10^4\;and\;1.9{\times}10^5$.

The effects of Government R&D subsidies on Private R&D investment - The case of Korean industry after 2000 - (정부 연구개발 보조금의 기업자체 R&D투자에 대한 효과 분석 - 2000년 이후 국내기업 사례를 중심으로 -)

  • Choi, Seok-Joon;Kim, Sang-Shin
    • Journal of Korea Technology Innovation Society
    • /
    • v.10 no.4
    • /
    • pp.706-726
    • /
    • 2007
  • This study attempts to empirically investigate the effects of government R&D subsidies on private firm's R&D investment in Korean industry. The R&D subsidy effect is defined as the average percentage change in firm's R&D expenditures between what was actually observed among firms that received a subsidy and what these firms would have spent had the subsidy not been received. To measure the effect we use Difference-in-Differences (DID) model which sign as to whether the relationship between government subsidies and private R&D investments is on stimulating or displacing private R&D expenditures. The differences between this study and previous studies are that we tries to measure the effect of Government R&D across various sited firm groups such as large, small & medium, and venture firms and we add one lag of the subsidy indicator in order to capture the effect of the subsidies on private R&D during 2 consecutive period. Empirically, a firm with government R&D subsidy increases its own R&D investment by 13.9%. Also on average, 1% of government R&D subsidy leads to 0.031% of private R&D increase. The main results of this study are as follows : First, Government R&D subsidies stimulate private firm's R&D expenditures. Second, Government R&D subsidies greatly increase (statistically significant) company financed R&D expenditures only for large firms but had no effect on the R&D expenditures of small & medium sized firms and venture firms.

  • PDF

Performance Comparison of Fin-Tube Type Evaporator using R134a and R1234yf under the Frost Condition (착상조건에서 R134a와 R1234yf를 적용한 핀-관 형태의 증발기 성능 비교)

  • Shin, Yunchan;Kim, Jinhyun;Cho, Honghuyn
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.16 no.9
    • /
    • pp.5795-5801
    • /
    • 2015
  • The low temperature distribution of the refrigerated and frozen food has been increased gradually. Refrigeration industry is using R134a refrigerant, which GWP is 1300. R1234yf is an alternative refrigerant of R134a because GWP of R1234yf refrigerant is just 4. Evaporator used in refrigeration truck refrigeration system is operated on low temperature condition. Accordingly, evaporator is formed frost and the formation of frost is rapidly decreased performance of evaporator. In this study, the performance of evaporator using R134a and R1234yf refrigerant was analyzed with operating conditions under frost condition. As a result, the performance of R134a evaporator according to air inlet temperature, relative humidity and evaporating temperature was more sensitive than R1234yf evaporator. Besides, the frost growth of R134a evaporator is steeper than that of R1234yf one.

The Study on Increase the Decomposition of Organics and Organic Removal Rates by using Sulfate in Sanitary Landfills (황산염을 이용한 매립지 유기물분해 촉진과 분해속도에 관한 연구)

  • Kim, Jeong Gwon;Yun, Tae Gyeong;Kim, Ga Ya
    • Journal of Environmental Science International
    • /
    • v.13 no.1
    • /
    • pp.69-77
    • /
    • 2004
  • In this study, sulfate reduction reaction was used to increase the decomposition of organics, which is the most critical factor for the stabilization of a landfill site. Composite of sewage sludge, papers, and incineration ashes was used in the column. The experimental results indicated that out of 10 reactors, the reactors 3, 4, 8. and 9 showed higher organics (i.e., TOC) removal rate than that in the absence of sulfate. The organics removal rates (K) in R3 and R9 were 8.65e$\^$-4/d and 3.82e$\^$-4//d, respectively. The times to reach 10% of initial concentrations in R3 and R9 was 7.3 and 16.5 years, respectively, showing faster organics decomposition rates in these reactors.

DVR Control System Design applied to 22.9kV Distribution System (22.9kV 배전선로 적용을 위한 DVR 제어시스템 설계)

  • Kim H. J.;Chung Y. H.;Kwon G. H.;Park T. B.;Jeon Y. S.
    • Proceedings of the KIEE Conference
    • /
    • summer
    • /
    • pp.30-32
    • /
    • 2004
  • This paper describes control system design for the DH(dynamic voltage restorer) consisted of a diode rectifier and series inverter applied to 22.9kV distribution system. The DVR control system is consisted of the main two parts. One is a voltage event detector using a neural network and the other is deadbeat controller for the output voltage and current control of the DVR. A simulation model was developed for analyzing performance of the controller and the whole system. The results confirm that the DVR can restore load voltage under the fault of the distribution system.

  • PDF

Flux Melting Route to 2-and 3-dimensional Fibrous Potassium Titanates, K$_2Ti_{2n}O_{4n+1}$ (n = 2 and 3) (Flux 용융법에 의한 2차원 및 3 차원 구조의 티탄산칼륨 섬유의 합성)

  • Jin-Ho Choy;Yang Su Han;Seung Wan Song
    • Journal of the Korean Chemical Society
    • /
    • v.37 no.8
    • /
    • pp.765-772
    • /
    • 1993
  • Two-dimensional potassium tetratitanate ($K_2Ti_4O_9$) and three-dimensional potassium hexatitanate ($K_2Ti_6O_{13}$) fibers have been prepared by the combined method consisting of the flux melting (1150$^{\circ}C$)-slow cooling (cooling rate = 5$^{\circ}C$/h) process from the starting raw materials of $K_2CO_3$, and $TiO_2$ with the flux of $K_2MoO_4$. It was found that the fiber growth reaction is strongly dependent upon the mole ratio of flux (F) to raw material (R), which is 7 : 3 (F : R) as for the optimum growth condition. Relatively long fibers (average length ${\thickapprox}$ 4 mm) with a mixture of $K_2Ti_4O_9$ (major) and $K_2Ti_6O_{13}$ (minor) could be obtained when the reaction was carried out for the $K_2MoO_4-$K_2O{\cdot}4TiO_2$ (F : R = 7 : 3) system, but for the $K_2$MoO_4$-$K_2O{\cdot}6TiO_2$ (F : R = 7: 3) one, only the short fibers with ${\thickapprox}$ 2 mm long could be grown as the mixed phase of $K_2Ti_6O_{13}$ and $K_2Ti_4O_9$.

  • PDF

UPPER BOUNDS FOR ASSIGNMENT FUNCTIONS

  • Lee, Gwang-Yeon
    • Communications of the Korean Mathematical Society
    • /
    • v.9 no.2
    • /
    • pp.279-284
    • /
    • 1994
  • Let R = ($r_1$, $r_2$, …, $r_{m}$) and S = ($s_1$, $s_2$, …, $s_{n}$ ) be positive integral vectors satisfying $r_1$$r_2$+…+ $r_{m}$ = $s_1$$s_2$+ㆍㆍㆍ+ $s_{n}$ , and let U(R, S) denote the class of all m $\times$ n matrices A = [$_a{ij}$ ] where $a_{ij}$ = 0 or 1 such that (equation omitted) = $r_{i}$ , (equation omitted) = $s_{j}$ , i = 1, ㆍㆍㆍ, m, j = 1, ㆍㆍㆍ, n.(omitted)

  • PDF

Home Ranges and Homing Routes of the Black Rockfish Sebastes schlegeli Measured by Acoustic Telemetry (음향 텔레메트리에 의한 조피볼락의 귀소범위 및 귀소경로 측정)

  • Kang, Kyoung-Mi;Shin, Hyeon-Ok
    • Korean Journal of Fisheries and Aquatic Sciences
    • /
    • v.41 no.3
    • /
    • pp.221-227
    • /
    • 2008
  • The black rockfish (Sebastes schlegeli) is an important commercial species in Korean fisheries. We used acoustic telemetry using coded ultrasonic transmitters to track the home ranges and homing routes of the black rockfish that inhabit in the Tongyeong marine ranching area. Twenty-four fish were released at five points. The distance from the capture point (C1) to the released point was 0 (R7), 0.2 (R1), 0.9 (R2), 1.3 (R3) and 1.9 (R4) km. Two of the three fish released at R1 (0.2 km) returned home in under 48hrs. Another was found 0.8km from C1. Two of the five fish released at R2 returned home, but it took over 250 days. None of the ten fish released at R3 and R4 returned home. Three of the ten fish moved 1.1-2.6 km from C1 and were found near a cage or a natural reef. Six fish were released at R7. The younger the fish, the wider was its movement range around the artificial reefs. Fish over 3 years old were likely to move less far.

Comparative Study of Condensation Heat Transfer Coefficients between R404A and R152a Flow in a Horizontal Smooth Tube (수평 평활관내 R404A와 R152a 냉매 유동의 응축 열전달 계수에 대한 비교 연구)

  • Lee, Sang-Yong;Kim, Man-Hoe;Lee, Chi-Young
    • Proceedings of the SAREK Conference
    • /
    • 2005.11a
    • /
    • pp.256-261
    • /
    • 2005
  • In the present experimental study, condensation heat transfer coefficients between R404A and R152a flow in a horizontal smooth tube were compared. The outer and inner diameters of the tube were 9.52 mm and 7.55 mm, respectively, and the heated length was 1045 mm. The mass flux ranged from 150 to 400 $kg/m^{2}s$ and the test section were uniformly heated from 8 to 12. $kW/m^2$. The quality range was from 0.2 to 0.8 at the saturation temperature from 27.3 to $34^{\circ}C$. Experimental condensation heat transfer coefficients increased as the quality and mass flux increased. Modified Dobson and Chato correlation reduced the mean deviation of 5.1% for R404A and 9.4% for R152a than the original correlation$^{(2)}$.

  • PDF

Study on the Flow Characteristics of R-22, R-l34a in Small Diameter Tubes (R-22 및 R-134a의 세관 내 유동 특성에 관한 연구)

  • 홍진우;정재천;장승환;권옥배;오후규
    • Korean Journal of Air-Conditioning and Refrigeration Engineering
    • /
    • v.14 no.9
    • /
    • pp.756-765
    • /
    • 2002
  • Experimental work was performed on the flow characteristics of R-22 and R-l34a in small diameter tubes. The experimental apparatus was made up of liquid pump, pre-heater, sight-glass, condenser and measurement instruments. The sight-glass for flow pattern observations was located at the outlet of the pre-heater. The experiment was carried out to show the flow characteristics of R-22 and R-l34a. Data were taken with test conditions in the following ranges; the mass flux was ranged from 100 to 1,000 kg/$m^2s$, the saturation temperature was $30^{\circ}C$ and the vapor quality was ranged from 0.1 to 0.9. The main results were summarized as follows; In the flow patterns during evaporation, the annular flow in a 2 mm inner diameter tube occurred at a relatively lower quality and mass velocity, compared to the flow in a 8mm inner diameter tube. The evaporation flow in small diameter tubes has been shown major deviations with the Mandhane, Taitel-Dukler's and Wambs-ganss' flow pattern maps but it was similar to the Dobson's flow pattern map.