• Korean Journal of Food Science and Technology
• /
• v.30 no.4
• /
• pp.832-841
• /
• 1998

In order to economically utilize flour brew with Bifidobacterium bifidum as a bread improver, the effect of flour brew on the rheological properties of dough, growth curve and acid production, and symbiosis with yeast were investigated. Growth of bifidobacteria was not increased more than initial seed volume but was consistent during 24 hours of incubation. pH was decreased and T.T.A was increased up to 12 hours of incubation. Symbiosis between bifidobacteria and yeast was little. Bifidobacteria produced more lactic acid than acetic acid in flour brew and the opposite in skim milk broth. This result was inferred from Lactobacillus sp. inherent in flour. On rheological properties of dough, farinograms of flour showed progressively decreasing baking absorption, mixing time and stability as the amount of flour brew increased. The validation of extensograms showed that R/E ratio linearly increased with increment of flour brew, and nearly doubled in all treatments comparing to that of control, which suggest the reduction of actual fermentation time. On visco/amylograms, malt index increased with addition of flour brew, accordingly showing the decrease in viscosity. Break down and set back value decreased with increment of flour brew, suggesting that staling rate of bread can be delayed.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.30 no.2
• /
• pp.88-94
• /
• 2016

The study was carried out to examine the anti-obesity effects of 40% ethanol extract from green tea seed (GS) and quantitative determination of caffeine as its major compound. The specificity was satisfied with retention time and UV spectrum by analysis of caffeine using HPLC and comparison with standard compound. It showed a high linearity in the calibration curve with a coefficient of correlation (R²) of 0.9974. The amount of caffeine in GS was about 4.649 mg/g (0.465%) in the three times analysis, and relative standard deviation (RSD) was less than 0.452% by the validated method. The anti-obesity effects of GS were evaluated by using Oil Red O staining in 3T3-L1 adipocytes and body weight, visceral fat and lipid profiles in high fat diet (HFD)-induced C57BL/6 obese mice. Our results indicated that treatment with GS dose-dependently decreased lipid accumulation contents (p<0.001). Moreover, after oral administration for 30 days feeding with HFD-induced obses mice, GS (100 and 300 mg/kg/day) produced a significant decrease in serum total cholesterol (TC), glutamic oxaloacetic transaminase (GOT), glutamic pyruvic transaminase (GPT) and visceral fat. Thus, the result of this study indicate that the GS may be a useful resource for the management of obesity.

• The Journal of the Petrological Society of Korea
• /
• v.24 no.3
• /
• pp.165-180
• /
• 2015

Jurassic granite from Geochang was analysed with respect to the characteristics of the rock cleavage. The phases of distribution of microcracks were well evidenced from the enlarged photomicrographs(${\times}6.7$) of the thin section. In this study, the length - cumulative frequency diagrams were used for expressing the distribution characteristics of microcrack. The diagrams for the six directions were arranged in the magnitude of density(${\rho}$). These diagrams show an order of H2 < H1 < G2 < G1 < R2 < R1 from the related chart. Among six diagrams, the diagram for hardway 2(H2) occupies the lowermost region on the left. On the contrary, the diagram for rift 1(R1) occupies the uppermost region on the right. Curve patterns of the two diagrams change from uniform to exponential distribution type in accordance with the increased density. The overall distribution characteristics of the diagrams were well evidenced from the magnitude of the exponent(${\lambda}$) and length of line oa related to the exponential straight line. The magnitude of exponent governing the values of slope(${\theta}$) is inversely proportional to the values of microcrack parameters such as number(N), length(L) and density. On the contrary, length of line oa is directly proportional to the values of the above three parameters. Above microcrack parameters related to the order of arrangement of diagrams show an order of hardway(H1 + H2) < grain(G1 + G2) < rift(R1 + R2). The distribution characteristics of progressive variation are found among the six diagrams. The order of arrangement of the diagrams indicates a relative magnitude of the rock cleavage. Meanwhile, the parameters such as slope, exponent, density and length of line oa were arranged in an order of H2 < H1 < G2 < G1 < R2 < R1. The variation curves of a smooth quadratic function are shown from the related chart. From the correlation chart between density and the above parameters, a common regularity following power-law correlation function was derived. Finally, the analysis for the rock cleavage was conducted through the combination between the diagram and microcrack parameter. This type of combination contribute to the progressivity in evaluation for the rock cleavage.

• Journal of Chest Surgery
• /
• v.41 no.1
• /
• pp.41-48
• /
• 2008

Background: Accurate assessment of the preload and the fluid responsiveness is of great importance for optimizing cardiac output, especially in those patients with coronary artery occlusive disease (CAOD). In this study, we evaluated the relationship between the parameters of preload with the changes in the stroke volume index (SVI) after fluid loading in patients who were undergoing coronary artery bypass grafting (CABG). The purpose of this study was to find the predictors of fluid responsiveness in order to assess the feasibility of using. certain parameters of preload as a guide to fluid therapy. Material and Method: We studied 96 patients who were undergoing CABG. After induction of anesthesia, the hemodynamic parameters were measured before (T1) and 10 min after volume replacement (T2) by an infusion of 6% hydroxyethyl starch 130/0.4 (10 mL/kg) over 20 min. Result: The right ventricular end-diastolic volume index (RVEDVI), as well as the central venous pressure (CVP) and pulmonary capillary wedge pressure (PCWP), failed to demonstrate significant correlation with the changes in the SVI (%). Only the right ventricular ejection fraction (RVEF) measured at T1 showed significant correlation. with the changes of the SVI by linear regression (r=0.272, p=0.017). However, when the area under the curve of receiver operating characteristics (ROC) was evaluated, none of the parameters were over 0.7. The volume-induced increase in the SVI was 10% or greater in 31 patients (responders) and under 10% in 65 patients (non-responders). None of the parameters of preload measured at T1 showed a significant difference between the responders and non-responders, except for the RVEF. Conclusion: The conventional parameters measured with a volumetric pulmonary artery catheter failed to predict the response of SVI following fluid administration in patients suffering with CAOD.

• Journal of Korean Society for Quality Management
• /
• v.5 no.2
• /
• pp.59-120
• /
• 1977

An antibiotic 'P', which is one of the products of the Gist Brocades N. V. is being tested by its research department as fungicide on seed-potatoes. For this testing they designed experiments, with two control groups, one competitor's product, eight formulations of the antibiotic to be tested in different concentrations and one mercury treatment which can not be used in practice. The treated potatoes were planted in three different regions, where bifferent conditions prevail. After several months the harvested potatoes are divided in groups according to their diameter, potato illness is analysed and counted. These data were summarised in percentage and given to us for Analysis. We approached and analysed the data by following methods: a. Computation of the mean and standard deviation of the percenage of good results in each size group and treatment. b. Computation of the experimental errors by substraction of each treatment mean from observed data. c. Description of the frequency table, plotting of a histogram and a normal curve on same graph to check normality. d. Test of normality paper and chi-sqeare test to check the goodness of fit to a normal curve. e. Test for homogeneity of variance in each treatment with the Cochran's test and Hartley's test. f. Analysis of Variance for testing the means by one way classifications. g. Drawing of graphs with upper and lower confidence limits to show the effect of different treatments. h. T-test and F-test to two Control mean and variance for making one control of Dunnett's test. i. Dunnett's Test and calculations for numerical comarision of different treatments wth one control. In region R, where the potatoes were planted, it was this year very dry and rather bad conditions to grow potatoes prevailed during the experimental period. The results of this investigation show us that treatment No.2, 3 and 4 are significantly different from other treatments and control groups (none treated, just like natural state). Treatment no.2 is the useless mercury formulation. So only No. 3 and 4, which have high concentrations of antibiotic 'P', gave a good effect to the potatoes. As well as the competitors product, middle and low concentrated formulations are not significantly different from control gro-ups of every size. In region w, where the potatoes got the same treatments as in region R, prevailed better weather conditions and was enough water obtainable from the lake. The results in this region showed that treatment No. 2, 3, 4, and 5 are Significantly different from other treatments and the control groups. Again No.2 is the mercury treatmentin this investigation. Not only high concentrated formulation of antibiotic 'P', but also the competitor's poroduct gave good results. But, the effect of 'P', was better than the competitors porduct. In region G, where the potatoes got the same treatments as in the regions R and w. and the climate conditions were equal to region R, the results showed that most of the treatments are not significantly different from the control groups. Only treatment no. 3 was a little bit different from the others. but not Significantly different. It seems to us that the difference between the results in the three regions was caused by certain conditions like, the nature of the soil the degres of moisture and hours of sunshine, but we are not sure of that. As a conclusion, we can say that antibiotic 'P' has a good effect on potatoes, but in most investigations a rather high concentration of 'P' was required in formulations.

• Journal of the Korean Magnetics Society
• /
• v.17 no.1
• /
• pp.43-46
• /
• 2007

The samples were synthesized by using a solid state reaction. The X-ray diffraction pattern for $Ti_{0.96}Co_{0.02}Fe_{0.02}O_2$ showed a pure rutile phase with tetragonal structures. Mixtures of the proper proportions of the elements sealed in evacuated quartz ampoule were heated at $870{\sim}930^{\circ}C$ for one day and then slowly cooled down to room temperature at a rate of $10^{\circ}C/h$. In order to obtain single phase material, it was necessary to grind the sample after the first firing and to press the powders into pellets before annealing them for a second time in evacuated and sealed quartz ampoule. Magnetic properties have been investigated using the vibrating sample magnetometer(VSM). Room temperature magnetic hysteresis(M-H) curve showed an obvious ferromagnetic behavior and the magnetic moment per Fe atom under the applied of 0.8T was estimated to be about $1.3{\mu}_B/CoFe$. But the magnetic moment per Fe atom under the applied of 0.8T was estimated to be about $0.02{\mu}_B/CoFe$ without Ti-getter.

• Journal of Plant Biotechnology
• /
• v.33 no.1
• /
• pp.19-25
• /
• 2006

With the use of Agrobacterium and gene-gun, cold regulated gene (BN115) has been injected in Chrysanthemum leaf disc and transgenic plants have been produced successfully on the selection media containing phytohormone. To determine the presence of the transferred cold regulated gene (BN115) in the transgenic Chrysanthemum, PCR-amplification indicated the presence of that gene. Real-Time PCR for confirmation of the putative transgenic plants was established. The copy number of cold regulated gene (BN115) is extrapolated on the basis of a standard curve. Serial dilutions of known number of gene copies were in triplicates. In this diagram, PCR cycles are plotted against the fluorescence intensity. The cycle at which the fluorescence reaches a threshold cycle is inversely proportional to the starting amount of target DNA.

• Korean Journal of Acupuncture
• /
• v.24 no.2
• /
• pp.99-112
• /
• 2007

Objectives : It was to translate three neck and spinal pain disability questionnaires - the Neck Disability Index (NDI), the Neck Pain and Disability Scale (NPDS), and the Functional Rating Index (FRI) - into Korean language, and evaluate the psychometric properties of Korean versions of questionnaires to achieve a good cross-cultural adaptation. Methods : Forty (23 males, 17 females) subjects aged from 15 to 64 years old, participated to examine test-retest reliability. One hundred and eighty (76 males, 104 females) subjects with a primary diagnosis of non-specific neck pain and 81 healthy volunteers were undertaken to examine internal consistemcy, discriminative validity and longitudinal construct validity. Versions of each questionnaire in idiomatic modern Korean were developed using a procedure proposed by Beaton et al. (2000). To assess reliability, the Intraclass Correlation Coefficient (ICC $_{(2,1)}$) was calculated. Internal consistency was evaluated by Cronbach's alpha. Discriminative validity was examined with independent-group t-tests. Responsiveness was tested by calculating the effect size and standardized response mean for each questionnaire and using Pearson' s r and the area under the receiver operating characteristic curve analysis. Results : Test-retest reliability ofthe translated versions of the three disability questionnaires was excellent (ICC $_{(2,1)$ = 0.86-0.90). High internal consistency was found in the three disability questionnaires (Cronbach's alpha ranged from ${\alpha}=0.88$ for the FRI to ${\alpha}=0.96$ for the NPDS and 0.82 for the Short Form McGill Pain Questionnaire(SFMPQ)). the VAS subscale of the SFMPQ was found to be the most responsive of the subscales (ES=1.44, SRM=1.37). The VAS was also the most responsive pain and disability index in internal responsiveness analysis, although disability indices showed marginally better responsiveness when compared with external standards. No floor or ceiling effects were observed. Conclusions : It is concluded that the questionnaires were successfully translated and exhibit acceptable measurement properties, and may suggest that they are suitable for use in clinical and research application.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.18 no.4
• /
• pp.278-291
• /
• 1998

Fracture process of continuous fiber reinforced composites is very complex because various fracture mechanisms such as matrix cracking, debonding, delamination and fiber breaking occur simultaneously during crack growth. If fibers cause crack bridging during crack growth, the stable crack growth and unstable crack growth appear repeatedly. Therefore, it is very difficult to exactly determine tile starting point of crack growth and the fracture toughness at the critical crack length in composites. In this research, fracture toughness test for CFRP was accomplished by using acoustic emission(AE) and recording of tile fracture process in real time by video-microscope. The starting point of crack growth, pop-in point and the point of unstable crack growth can be exactly determined. Each fracture mechanism can be classified by analyzing the fracture process through AE and video-microscope. The more reliable method ior the fracture toughness measurement of composite materials was proposed by using the combination of R-curve method, AE and video microscope.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.7
• /
• pp.102-108
• /
• 2017

The phenomenon of technological discontinuity which occurs during technological diffusion and substitution between incumbents and new technology is important to understand the behavior of technology diffusion and substitution of single and multiple technologies. Our research defined the concept of technological discontinuity and developed a model capable of measuring the region of technological discontinuity. Based on a literature review and a model development, we proposed a definition and a model regarding technological discontinuity.The accuracy of the model is verified by applying it on a semiconductor industry case. The technological discontinuity is defined as the region in which both the incumbent and new technology co-exist and the performance of the incumbent technology is better than that of the new technology. In addition, we can model the technological discontinuity using discontinuous time and discontinuous performance. This research will be very useful to understand not only technological discontinuity but also technology diffusion or substitution.