• Title/Summary/Keyword: R-mark

Search Result 160, Processing Time 0.038 seconds

A Sensorless and Versatile Temperature-Control System for MEMS Microheaters (온도센서를 사용하지 않는 MEMS 마이크로히터 온도제어시스템)

  • Bae, Byung-Hoon;Yeon, Jung-Hoon;Flachsbart Bruce R.;Shannon Mark A.
    • The Transactions of the Korean Institute of Electrical Engineers C
    • /
    • v.55 no.11
    • /
    • pp.544-547
    • /
    • 2006
  • In this paper, we present a temperature-controlled system for MEMS electrical resistance heaters without a temperature sensor. To rapidly control the heater temperature, the microheater system developed consists of a power supply, power amplifier, digital ${\underline{P}}roportional-{\underline{I}}ntegral-{\underline{D}}ifferential$ (PID) controller, and a quarter bridge circuit with the microheater and three resistors are nominally balanced. The microheaters are calibrated inside a convection oven to obtain the temperature coefficient with a linear or quadratic fit. A voltage amplifier applies the supply voltage proportional to the control signal from the PID controller. Small changes in heater resistance generate a finite voltage across the quarter bridge circuit, which is fed back to the PID controller to compare with the set-point and to generate the control signal. Two MEMS microheaters are used for evaluating the developed control system - a NiCr serpentine microheater for a preconcentrator and a Nickel microheater for ${\underline{P}}olymerase\;{\underline{C}}hain\;{\underline{R}}eaction$ (PCR) chip.

Isolate Virulence and Cultivar Response in the Winter Wheat: Pyrenophora tritici-repentis (Tan Spot) Pathosystem in Oklahoma

  • Kader, Kazi A.;Hunger, Robert M.;Payton, Mark E.
    • The Plant Pathology Journal
    • /
    • v.37 no.4
    • /
    • pp.339-346
    • /
    • 2021
  • Prevalence of tan spot of wheat caused by the fungus Pyrenophora tritici-repentis has become more prevalent in Oklahoma as no-till cultivation in wheat has increased. Hence, developing wheat varieties resistant to tan spot has been emphasized, and selecting pathogen isolates to screen for resistance to this disease is critical. Twelve isolates of P. tritici-repentis were used to inoculate 11 wheat cultivars in a greenhouse study in splitplot experiments. Virulence of isolates and cultivar resistance were measured in percent leaf area infection for all possible isolate x cultivar interactions. Isolates differed significantly (P < 0.01) in virulence on wheat cultivars, and cultivars differed significantly in disease reaction to isolates. Increased virulence of isolates detected increased variability in cultivar response (percent leaf area infection) (r = 0.56, P < 0.05) while increased susceptibility in cultivars detected increased variance in virulence of the isolates (r = 0.76, P < 0.01). A significant isolate × cultivar interaction indicated specificity between isolates and cultivars, however, cluster analysis indicated low to moderate physiological specialization. Similarity in wheat cultivars in response to pathogen isolates also was determined by cluster analysis. The use of diverse isolates of the fungus would facilitate evaluation of resistance in wheat cultivars to tan spot.

Nonlinear P-Δ analysis of steel frames with semi-rigid connections

  • Valipour, Hamid R.;Bradford, Mark A.
    • Steel and Composite Structures
    • /
    • v.14 no.1
    • /
    • pp.1-20
    • /
    • 2013
  • This paper presents the formulation for a novel force-based 1-D compound-element that captures both material and second order P-${\Delta}$ nonlinearities in steel frames. At the nodal points, the element is attached to nonlinear rotational and a translational springs which represent the flexural and axial stiffness of the connections respectively. By decomposing the total strain in the material as well as the generalised displacements of the flexible connections to their elastic and inelastic components, a secant solution strategy based on a direct iterative scheme is introduced and the corresponding solution strategy is outlined. The strain and slope of the deformed element are assumed to be small; however the equilibrium equations are satisfied for the deformed element taking account of P-${\Delta}$ effects. The formulation accuracy and efficiency is verified by some numerical examples on the nonlinear static, cyclic and dynamic analysis of steel frames.

Multi-Band Polarimetric Observations of the Lunar Surface

  • Jung, Minsup;Kim, Sungsoo S.;Min, Kyoung Wook;Jin, Ho;Garrick-Bethell, Ian;Morris, Mark
    • The Bulletin of The Korean Astronomical Society
    • /
    • v.38 no.2
    • /
    • pp.93.2-93.2
    • /
    • 2013
  • Polarization of the light scattered by the lunar surface contains information on the mean particle size of the lunar regolith, which gradually decreases by continued micro-meteoroid impact over a long period and thus is an age indicator of the surface. We performed multi-band (U, B, V, R and I) polarimetric observations toward the whole near side of the Moon at the Lick observatory using a 15-cm reflecting telescope with 1.1km/pixel spatial resolution at the center of the lunar disk. We analyze the color dependence of the polarization properties of the lunar regolith and discuss its implication for the study of lunar swirls.

  • PDF

Treatment of locking behaviour for displacement-based finite element analysis of composite beams

  • Erkmen, R. Emre;Bradford, Mark A.;Crews, Keith
    • Structural Engineering and Mechanics
    • /
    • v.51 no.1
    • /
    • pp.163-180
    • /
    • 2014
  • In the displacement based finite element analysis of composite beams that consist of two Euler-Bernoulli beams juxtaposed with a deformable shear connection, the coupling of the displacement fields may cause oscillations in the interlayer slip field and reduction in optimal convergence rate, known as slip-locking. In this study, the B-bar procedure is proposed to alleviate the locking effects. It is also shown that by changing the primary dependent variables in the mathematical model, to be able to interpolate the interlayer slip field directly, oscillations in the slip field can be completely eliminated. Examples are presented to illustrate the performance and the numerical characteristics of the proposed methods.

Manufacture and Experiment of Compensated Ionization Chamber for the Nuclear Power Reactor (동력로용 보상형 전리함의 제작 및 실험)

  • 육종철;고병준;박용집
    • 전기의세계
    • /
    • v.19 no.4
    • /
    • pp.18-23
    • /
    • 1970
  • A neutron detector, in general, can not be utilized as the thermal neutron detecting chamber in the nuclear power reactor, especially P.W.R. due to the characteristics of high temperature, high pressure and high neutron flux in a reactor vessel. We have performed an experiment to detect the thermal neutrons at 400.deg. C and high flux of thermal neutron in a power reactor. Coating boron-10 on the aluminium plates by means of surface diffusion method at 600.deg. C for 5 hours in an electric furace, also we made a typical chamber which was compensated ionization chamber filled with free air as an ionization gas. It was checked the chamber characteristics in the TRIGA MARK-II Reactor at the power level from zero to 250KW. The chamber current showed a perfect linear increase to power increase. However, many variation of the measured current were observed within the power of 50KW.

  • PDF

N(2D) Product Velocity Mapped Imaging in the VUV Photolysis of Nitrous Oxide at 118.2 nm

  • Cosofret, Bogdan R.;Lambert, H. Mark;Houston, Paul L.
    • Bulletin of the Korean Chemical Society
    • /
    • v.23 no.2
    • /
    • pp.179-183
    • /
    • 2002
  • Resonance-enhanced multiphoton ionization with time-of-flight product imaging of the $N(^2D)$ atoms has been used to study the $N_2O$ photodissociation at 118.2 nm and the two-photon dissociation at 268.9 nm. These imaging experiments allowed the determination of the total kinetic energy distribution of the $NO(X^2{\prod})$ and $N(^2D_{5/2})$ products. The $NO(X^2{\prod})$ fragments resulting from the photodissociation processes are produced in highly vibrationally excited states. The two-photon photodissociation process yields a broad $NO(X^2{\prod})$ vibrational energy distribution, while the 118.2 nm dissociation appears to produce a vibrational distribution sharply peaked at $NO(X^2{\prod},\;{\nu}=14)$.

Multiple Access Protocols for a Multichannel Optical Fibre Local Area Network Using a Passive Star Topology and WDM (Passive Star 토플로지와 WDM을 사용한 다중채널 광섬유 LAN을 위한 Multiple Access 르로토콜)

  • ;Jon W. Mark
    • Journal of the Korean Institute of Telematics and Electronics A
    • /
    • v.32A no.9
    • /
    • pp.1184-1201
    • /
    • 1995
  • Two multiple access protocols are proposed for a multichannel WDM optical fibre local area network or metropolitan area network in which users are interconnected using a passive star topology. Each user has a single tunable transmitter and a single tunable receiver. A transmitter sends a control packet before its data packet transmission so that its intended receivers can tune to the proper data channel wavelength. The maximum throughput of the proposed protocols are independent of the effective normalized propagation delay which may include the transmitter and receiver tuning times and the processing delays. The maximum throughputs of the protocols are analyzed and compared with those of the existing ones by numerical examples. The message delay of the R- Aloha/synchronous N-server switch protocol which is suitable for the queued users is also analyzed.

  • PDF

WFC3 study on the early-type galaxy NGC4150

  • Jeong, Hyun-Jin;Yi, Suk-Young K.;Crockett, R. Mark;Kaviraj, Sugata
    • The Bulletin of The Korean Astronomical Society
    • /
    • v.35 no.2
    • /
    • pp.28.1-28.1
    • /
    • 2010
  • Recent surveys have shown that many early-type galaxies have signatures of ongoing or recent star formation (RSF). These RSF galaxies show blue integrated UV-optical colours that set them aside in the NUV integrated colour-magnitude relation. Among them, NGC 4150 has been observed using the Wide Field Camera 3 (WFC3) on board the Hubble Space Telescope to inspect the galaxy with higher spatial resolution. In the WFC3 data, the galaxy reveals ubiquitous near-UV emission and remarkable dusty substructure. Our analysis shows this galaxy to lie in the near-UV green valley, and its pixel-by-pixel photometry exhibits a narrow range of UV-optical colours that are similar to those of nearby E+A (post-starburst) galaxies, and lie between those of M83 (an actively star-forming spiral) and the local quiescent early-type galaxy population. This work reaffirms our hypothesis that minor mergers play a significant role in the evolution of early-type galaxies at late epochs.

  • PDF

The Performance Comparison of Low-Overhead Fault Tolerant Services based on Distributed Object (분산객체 기반 경량화 결함허용 기술의 성능 비교)

  • Kim, Shik;Hyun, Mu-Yong
    • The Journal of Information Technology
    • /
    • v.9 no.4
    • /
    • pp.25-34
    • /
    • 2006
  • As most application programs are more sophisticated and are adopted the distributed object technology, the object based distributed design became widespread since it supports portability and reusability. The approaches for fault-tolerant distributed computing are categorized into the active replica mechanism for mission-critical application programs and the passive replica mechanism for non mission-critical ones, when fault-tolerant facilities are added on. Our paper introduces the pros and drawbacks of several approaches for the add-on low-overhead fault-tolerant services by the surveys and shows the results of experiments for bench-mark models in order to demonstrate their performance.

  • PDF