• 간호행정학회지
• /
• 제12권3호
• /
• pp.365-372
• /
• 2006

Purpose: OSCE, Objective Structured Clinical Examination, is a good way to evaluate clinical skills of nursing students. To do this, we need modules, evaluators, persons to run the examination, as well as models and standardized patients if necessary. Author coached nursing students to develop modules and ran the examination by themselves. Method: 24 third-year and 4 first-year students volunteered; third-year students developed 5 modules, and organized and ran the examination. First-year students played patient role. 60 2nd-year students participated as examinees. Modules were duplicated to finish examination in a given time. The relationship between OSCE score, conventional clinical evaluation score and credit of students was compared. Effect of module duplication on score was tested. And responses of examinees were collected. Results: There was no correlation between OSCE and conventional clinical evaluation score (r=0.07), and credit (r=0.27), And there was no difference of OSCE score between duplicated modules $(53.77{\pm}7.61$ vs $55.33\pm7.74).$ Response of examinees to OSCE was favorable. Examinee did not expressed resistance for the evaluation by OSCE developed and ran by students. Conclusion: Nursing students successfully developed and ran OSCE, which was accepted favorably by examinees. Student-developed OSCE may play a role in evaluation of clinical performance.

• 대한수학회지
• /
• 제55권5호
• /
• pp.1235-1255
• /
• 2018

We provide definitions for the helicoidal Killing field and the helicoid in arbitrary three-manifolds, and investigate helicoids and ruled minimal surfaces in homogeneous three-manifolds, mainly in $SL_2{\mathbb{R}}$ and Sol(3). In so doing we finish our classification of ruled minimal surfaces in homogeneous three-manifolds with the isometry group of dimension 4.

• 한국염색가공학회지
• /
• 제2권4호
• /
• pp.251-256
• /
• 1990

Bis-(p-bromopheny)phosphate(BBPP) , which serves as flame retardant for PET fabric, was synthesized from phenol and phosphorus oxychloride, and from bromine. In order to investigate the flame retardancy of BBPP, PET fabrics were steam-cured with diluted BBPP solution. The following conclusions were drawn : 1. Flame retardancy of PET fabrics treated with BBPP was excellent, and optimal treating condition was 10% concentration of flame retardant at $170^{\circ]C$ 2. Clark softness and tensile strength before and after the laundering of PET fabrics treated with flame retardant remained nearly unchanged.

• 대한약침학회지
• /
• 제13권1호
• /
• pp.87-92
• /
• 2010

Objectives:This study was performed to examine the side effect of inflammatory reactions of Pharmacopuncture lubricants (CF and JsD) using animal model. Methods:Pharmacopuncture lubricants (CF and JsD) were treated repeatedly the same point in Sprague-Dawley rats. And after finish the treatment, we obtain the tissue of muscle layer in rats where Pharmacopuncture lubricants were treated. And we observed the tissue how the change occurred in HE staining. Results: 1. There was no evidence to make inflammation induced by pharmacopuncture lubricants except 4 weeks treated group. 2. Only 4 weeks treated group(CF, JsD) were showed some infectional tissue's view in H-E staining. But it is not certain due to Pharmacopuncture lubricants. Conclusion:It appears that prolonged usage of pharmacopuncture lubricant on the specific point can induce inflammation, so we may be careful for treating time and point using pharmacopuncture lubricant in clinics.

• 한국염색가공학회지
• /
• 제14권6호
• /
• pp.313-318
• /
• 2002

Chitosan is known to be an excellent biocompatible natural polymer. Recently, with a growing interest of health and environment, chitosan which is good in no harmful effect on human body and environment, has been watched as the finish treatment of hygiene and pleasantness. The purpose of this study is to develop multi functional fabrics by chitosan added on acrylic acid grafted cotton fabrics. Therefore physical properties such as moisture regain, air permeability, whiteness, static voltage and tensile strength of chitosan added on acrylic acid grafted cotton fabrics were investigated. The results are as follows ; According to increased chitosan's concentration, grafting yield was decreased. Therefore thickness of film by treated chitosan added on acrylic acid grafted cotton fabric became thin. FT R spectra of chitosan add on acrylic acid grafted cotton fabric clearly showed peaks of COOH and $NH_2$, Moisture regain, static voltage of chitosan add on acrylic acid grafted cotton fabrics were increased than control. Air permeability, whiteness and tensile strength were decreased than control.

• 한국안전학회지
• /
• 제17권3호
• /
• pp.30-35
• /
• 2002

The magnetic abrasive polishing is the useful method to finish using magnetic power of a magnet. It's not a long time this method was introduced to korea as one of precision finishing techniques. The magnetic abrasive polishing method is not so common for machine that it is not spreaded widely. The are rarely researcher in this field because of no-effectiveness of magnetic abrasive. The mechanism of this R&D is dealing with the dynamic state of magnet-abusive. This paper deals with mediocritizing magnetic polishing device into regular lathe and this experiment was conducted in order to get the best surface roughness at low cost. We need to continue the research on it. This paper contains the result of experiment to acquire the best surface roughness, not using the high-cost polishing material in processing. The average diameters of magnetic abrasive are the particles of 150$\mu\textrm{m}$, 250$\mu\textrm{m}$.

• 조명전기설비학회논문지
• /
• 제26권12호
• /
• pp.62-67
• /
• 2012

In this paper general purpose voltage source inverter drives are equipped with an under-voltage protection mechanism, causing the system to shut down within a few milliseconds after a power interruption in the main input sources. When a power interruption occurs finish, if the system is a large inertia restarting the load a long time is required. This paper suggests modifications in the control algorithm in order to improve the sag ride-through performance of ac inverter. The new proposed strategy recommends maintaining the DC-link voltage constant at the nominal value during a sag control algorithm, experimental results are presented.

• 한국지열·수열에너지학회논문집
• /
• 제15권4호
• /
• pp.24-31
• /
• 2019

In this paper, we simulated a new apartment building by using radon emission test values from various building materials used as interior finishing materials. The simulations evaluated the radon concentration in the room according to the radon emissions and the ventilations for each type of finishing material (gypsum board, stone, tile and concrete). Overall concrete finish simulation case showed the highest concentration than the case using other materials due to the effect of wall area at the center of each room and the mean radon concentration at 1.5 m above the floor was slightly lower than the mean value at each center. In the case of the porch, pantry and bathroom, the radon concentration was high even when the same materials were used as in the other rooms.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.1083-1087
• /
• 1997

End milling is available for machining the variable shape of products and has brrn widely applied in many Manufacturing industries. The surface finish of machined parts determines quality and functionality of products. Surface roughness causes friction,noise,fracture, glossiness and seizure, so many research had been performed to precisely. In particular an experimental analysis was carried out to investigate the influence ofsurface roughness on the fractal dimension. This parameter was assumed to contain not only information of roughness but also extra meaning. Experiments which were performed under various cutting conditions to compare fractal dimension with surface roughness R /sab a/ show fractal dimension to be useful parameter for determining of roughness.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.927-931
• /
• 1997

In process of the finish face milling of the hardended STD11 steel(H /sab r/ c50,55) by CBN tool, the optimum tool shape is suggested,which can minimize the tool fracture and by chipping by impact. The obtained results are as follows. (1) The optimal chamfer angel was about 25 .deg. , and the suitable chamfer width was 0.2mm. (2) The nose radius of tool was most excellent at 1.2mm in the viewpoint of tool wear and surface roughness. (3) Wear speed was effected by sintering method of CBN tool B.U.E