• 한국가스학회:학술대회논문집
• /
• 2003.10a
• /
• pp.85-90
• /
• 2003

Korea Gas Corp. has developed the design technology of the LNG storage tank. The membrane to be applied inside of LNG storage tank is provided with corrugations to absorb thermal contraction and expansion caused by LNG temperature. We constructed strain measurement system by using strain gage. In this paper, some problems which should be considered when measuring strain at $-162^{\circ}C$, are discussed by presenting test results on the characteristics of strain gages, Temperature sensor, adhesive and lead wire. And presenting the procedure of the constructing strain measurement system.

• Proceedings of the KWS Conference
• /
• 2007.11a
• /
• pp.155-157
• /
• 2007

The Friction spot dissimilar welding of galvanized steel/Al6061-T6 was performed to investigate the mechanical characteristics of the joints. The presence of thin film of aluminum oxide on the surface and melting of zinc in the coating, made substandard joint characteristics for dissimilar Friction spot joining(FSJ) performed with out removing the coating. Where as, for dissimilar FSJ of galvanized steel/Al6061-T6 after removing the coating, superior agitation and welding quality has been obtained for a configuration of galvanized steel as the upper plate and Al6061-T6 as lower plate. The results from tensile tests and microscopic examination for various combinations of the welding parameters have been presented.

• Investigative Magnetic Resonance Imaging
• /
• v.7 no.1
• /
• pp.39-46
• /
• 2003

Purpose : To develop a theoretical model for magnetic relaxation behavior of the superparamagnetic nano-particle agent, which demonstrates multi-functionality such as liver- and lymp node-specificity. Based on the developed model, the computer simulation was performed to clarify the relationship between relaxation time and the applied magnetic field strength. Materials and Methods : The ultrasmall superparamagnetic iron oxide (USPIO) was encapsulated with biocompatiable polymer, to develop a relaxation model based on outsphere mechanism, which was resulting from diffusion and/or electron spin fluctuation. In addition, Brillouin function was introduced to describe the full magnetization by considering the fact that the low-field approximation, which was adapted in paramagnetic case, is no longer valid. The developed model describes therefore the T1 and T2 relaxation behavior of superparamagnetic iron oxide both in low-field and in high-field. Based on our model, the computer simulation was performed to test the relaxation behavior of superparamagnetic contrast agent over various magnetic fields using MathCad (MathCad, U.S.A.), a symbolic computation software. Results : For T1 and T2 magnetic relaxation characteristics of ultrasmall superparamagnetic iron oxide, the theoretical model showed that at low field (<1.0 Mhz), $\tau_{S1}(\tau_{S2}$, in case of T2), which is a correlation time in spectral density function, plays a major role. This suggests that realignment of nano-magnetic particles is most important at low magnetic field. On the other hand, at high field, $\tau$, which is another correlation time in spectral density function, plays a major role. Since $\tau$ is closely related to particle size, this suggests that the difference in R1 and R2 over particle sizes, at high field, is resulting not from the realignment of particles but from the particle size itself. Within normal body temperature region, the temperature dependence of T1 and T2 relaxation time showed that there is no change in T1 and T2 relaxation times at high field. Especially, T1 showed less temperature dependence compared to T2. Conclusion : We developed a theoretical model of r magnetic relaxation behavior of ultrasmall superparamagnetic iron oxide (USPIO), which was reported to show clinical multi-functionality by utilizing physical properties of nano-magnetic particle. In addition, based on the developed model, the computer simulation was performed to investigate the relationship between relaxation time of USPIO and the applied magnetic field strength.

• Korean Journal of Food Science and Technology
• /
• v.22 no.6
• /
• pp.681-685
• /
• 1990

Changes in the physicochemical characteristics and trans acid of cottonseed oil under the condition of selective hydrogenation, temperature$210^{\circ}C,\;H_2\;pressure\;0.3\;kg/cm^2$ Ni catalyst amount 0.12% (in oil), agitation speed 280 rpm, were investigated. The saturated fatty acid such as palmitic acid and stearic acid did not show any difference, while linoleic acid($50.03%{\rightarrow}9.38%$) were transformed to oleic acid ($20.65%{\rightarrow}60.35%$) during hydrogenation. In linoleic acid isomers, cc form were reduced significantly, but ct, tc, tt form showed little change, respectively. In oleic acid isomer, t form increased markedly, whereas there was no significant difference in c form. Meanwhile, melting point(MP) and solid fat content (SFC) were linearly increased, but iodine value(IV) linearly decreased as hydrogenation proceeded. From these results, linear regression equations were obtained as follows. MP & IV : Y= 1.59-2.36X(r=-0.96, p<0.05), SFC($at\;20^{\circ}C$) & MP : Y=2.81+2.01X(r=0.96, p<0.05), SFC($at\;20^{\circ}C$) & IV : Y=9.40-5.16X(r=-0.99, p<0.01), SFC($at\;20^{\circ}C$) & 18 : 1t : Y=6.25+8.48X(r=0.97, p<0.05)

• Elastomers and Composites
• /
• v.41 no.3
• /
• pp.147-156
• /
• 2006

To investigate the influence of the foaming temperature and carbon black content on the cure behaviors and foaming characteristics of the foams. natural rubber (NR) was foamed at five temperature zones (145, 150, 155, 160 and $165^{\circ}C$) and different feeding ratios of the carbon black. A decreasing trend of the scorch time, $t_{s2}$ and cure time, $t_{90}$ was observed upon increasing foaming temperature and carbon black content. The optimal temperature for vulcanization and foaming of NRs in this study was considered to be $165^{\circ}C$ where density of the loomed NRs is lower than those at other four temperature regions. The rule rate index of the NRs foamed at $145^{\circ}C$ is smaller than those at 150, 155, 160 and $165^{\circ}C$. The results of the expansion ratio and micrographs of the foamed NRs were founded to support the density characteristics. The thickness of each of the struts formed inside the rubber matrix decreases with increasing the foaming temperature, while it increases with increasing the carbon black content.

• Journal of Industrial Technology
• /
• v.16
• /
• pp.31-38
• /
• 1996

This experimental study was conducted to analyze the characteristics of centrifugal pipes which were made of silica fume concrete. External load tests showed that maximum external load ranged from 1,100~5,300kgf/m with thickness ratio(t/D) of between 4.5%~10.0%. Correlation between thickness ratios and external loads was excellent with $R^2$ of 0.99. Respective correlation between measured and computed vertical deformation was good with $R^2$ of higher than 0.90. And therefore, vertical deformation and tensile stress of centrifugal concrete pipes may be theoretically computed with a good precision.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2006.05a
• /
• pp.228-231
• /
• 2006

• Women's Health Nursing
• /
• v.29 no.4
• /
• pp.274-290
• /
• 2023

Purpose: This study investigated the effects of prenatal education characteristics, pandemic-related pregnancy stress, and health behaviors during pregnancy on prenatal depression in pregnant women during the coronavirus disease 2019 (COVID-19) pandemic. Methods: The participants were 180 pregnant Korean women, recruited from internet communities for pregnancy preparation, childbirth, and childcare, from July 5 to 15, 2022. The collected data were analyzed using the t-test, analysis of variance, the Mann-Whitney U-test, the Kruskal-Wallis test, and multiple regression analysis. Results: The scores for pandemic-related pregnancy stress (24.50±6.37) and health behaviors during pregnancy (67.07±9.20) were high. Nearly half of the participants (n=89, 49.4%) presented with prenatal depression, with scores of 10 or greater. Prenatal depression had a positive correlation with gestational age (r=.18, p=.019) and pandemic-related pregnancy stress (r=.27, p<.001), and a negative correlation with health behaviors during pregnancy (r=-.42, p<.001). The factors associated with prenatal depression were pandemic-related pregnancy stress (t=4.70, p<.001), marital satisfaction (dissatisfied) (t=3.66, p<.001), pregnancy healthcare practice behaviors (t=-3.31, p=.001), family type (weekend couple) (t=2.84, p=.005), and gestational age (t=2.32, p=.022). The explanatory power of these variables was 38.2%. Conclusion: Since participants had a high level of prenatal depression during the pandemic, and infectious diseases such as COVID-19 may recur, strategies should be developed to improve pregnant women's mental health with consideration of the unique variables that are relevant in a pandemic. It is also necessary to develop efficient online prenatal education programs that can be implemented even in special circumstances such as social distancing, and to evaluate their effectiveness.

• Journal of Animal Science and Technology
• /
• v.45 no.6
• /
• pp.967-974
• /
• 2003

This experiment was carried out to investigate the relationship of morphological characteristics between reticulum and abomasum of Korean native young goats age from 2 days to 150 days. Number of traits investigated in the reticulum in this experiment were 12[body weight, chest girth, body length, right and left reticulum length(R.L.), upper and lower reticulum length(U.L.), reticulum weight(R.W.), reticulum area(R.A.), upper and lower length of one polygon located at central part of reticulum(U.P.C.R.), right and left length of one polygon located at central part of reticulum(R.P.C.R.), thickness of polygon wall located at central part of reticulum(T.P.C.R.), thickness of polygon wall located at middle part of reticulum(T.P.M.R.), and thickness of polygon wall locared at edge part of reticulum(T.P.E.R.)] and items for abomasum were 12[length of between ostium omaso-abomasicum part and pylosica part in the abomasum(L.B.O.P.), broadest outer part of the abomasum(B.O.A.), weight of abomasum(W.O.A.), area of abomasum(A.O.A.), number of plicae abomasi in the abomasum(N.P.A.A.), thickness of abomasum well at cranial part(ostium omasoabomasicum) in the abomasum(T.A.C.A.), thickness of abomasum well at central part in the abomasum(T.A.P.A.), thickness of abomasum wall at light upper area of pylosica part in the abomasum(T.A.L.A.), length measured from the longest plica abomasi in the abomasum(L.L.P.A.), broadest measured from the longest plica abomasi in the abomasum(B.L.P.A.), area measured from the longest plica abomasi in the abomasum(A.L.P.A.), weight of longest plica abomasi in the abomasum(W.L.P.A.)]. The results were summarized as follows: 1. Number of coefficient of correlation obtained among 12 traits of the abomasum and 12 of the reticulum were 144, and coefficient of correlation of 114 were significant(P〈0.05). 2. Trait of abomasum weight have high correlation with 12 traits of reticulum. 3. Correlation coefficients and regression equation between body weight. VS. abomasum weight(r$_1$), and upper and lower length of one polygon located at central part of reticulum(U.P.C.R.) VS. abomasum weight(r$_2$) were r$_1$=0.8954$^{**}$ and Y=10.703+3.374X, r$_2$=0.8430$^{**}$ and Y=5.689+4.311X, respectively. 4. Correlation coefficients and regression equation between chest girth VS. abomasum weight(r$_1$), and body weight VS. abomasum weight(r$_2$) were r$_1$=0.8708$^{**}$ and Y=-17.219+1.227X, r$_2$=0.8589$^{**}$ and Y=- 17.616+1.290X, respectively.

• Journal of Advanced Navigation Technology
• /
• v.6 no.1
• /
• pp.52-62
• /
• 2002

Electrical characteristics of two types of 20 GHz Push-Push GaAs MESFET dielectric resonator oscillators having Wilkinson and T-junction power combiners for the output stage have been investigated. The Push-Push oscillator for suppressing fundamental frequency 10 GHz and enhancing 20 GHz has been designed and realized in microstrip configuration on 20 mil thick RT-Duroid(${\varepsilon}_r$=2.52) teflon substrate. Two different types of power combiners, T-junction and Wilkinson, have been considered. Whenever one type of the combiners has been adopted for the output circuit, output power, phase noise and fundamental frequency suppression characteristics of the oscillator have been measured. When the Wilkinson power combiner was used, a maximum output power of 5.67 dBm, a phase noise of -105.5 dBc/Hz at an offset frequency of 100 kHz and a fundamental frequency suppression of -29.33 dBc have been measured. When the T-junction power combiner was used, a maximum output power of -1.17 dBm, a phase noise of -102.2 dBc/Hz at an offset frequency of 100 kHz and a fundamental frequency suppression of -17.84 dBc have been measured.