• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 C
• /
• pp.1603-1605
• /
• 1994

Recently, Gas Circuit Breakers are rapidly replacing Vacuum Circuit Breakers in the medium voltage switchgear. This is due to the improved performance of - GCB in interrupting capability, price, weight, size etc., while the countermeasure to suppress the switching surges of VCB has not been satisfactory. Intensive research works on the GCB have been conducted in the world widely since 1980. Nowadays it is well known that the thermal expansion type GCB can provide- better performance than puffer type in the distribution power system. KERI has conducted researches in the GCB rated at 25.8kV 25kA with Jinkwang Co. using the thermal expantion principle since 1993. In this paper, the calculated results of electric and magnetic fields for the model GCB are presented and analyzed. The effect of permanent magnet used to improve the interruption capabilty at the low current level is also investigated. The design parameters for the interrupter inspected through the short-circuit tests conducted at high power laboratory of KERI.

• 전기의세계
• /
• 제29권12호
• /
• pp.791-797
• /
• 1980

This paper is concerned with the study of improving the faults of phase control scheme and suggesting a new approach to the control of load circuit with AC source. AC current control can restrict the magnitude of current within the given upper and lower current and make current continuous during every cycle. Also the harmonic contents of current can be greatly reduced using this control scheme. Analog computer and digital computer simulations reveal that the current control scheme is superior to the phase control scheme in controlling the power supply to the load R-L. Experimintal results demonstrate the feasibility and verify the operation of current controlled system.

• Progress in Superconductivity
• /
• 제5권2호
• /
• pp.136-140
• /
• 2004

We fabricated and tested a resistive superconducting fault current limiters (SFCL) operated at 3.8 ㎸ based on YBCO thin films. The SFCL was composed of 7 components connected in series. Each component was designed to be capable of current limiting at 600 V, and has a SiC shunt resistor ( $R_{s}$) of 40 Ω in Parallel. Short circuit tests were carried out fur 0 and 90 degree faults lasting fur 5 cycles. The test results showed that the 7 components were quenched simultaneously under the safe quenches and evenly shared the applied voltage. The SFCL successfully suppressed the fault currents below 94 $A_{peak}$ within the quarter cycle after fault.t.t.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제55권11호
• /
• pp.544-547
• /
• 2006

In this paper, we present a temperature-controlled system for MEMS electrical resistance heaters without a temperature sensor. To rapidly control the heater temperature, the microheater system developed consists of a power supply, power amplifier, digital ${\underline{P}}roportional-{\underline{I}}ntegral-{\underline{D}}ifferential$ (PID) controller, and a quarter bridge circuit with the microheater and three resistors are nominally balanced. The microheaters are calibrated inside a convection oven to obtain the temperature coefficient with a linear or quadratic fit. A voltage amplifier applies the supply voltage proportional to the control signal from the PID controller. Small changes in heater resistance generate a finite voltage across the quarter bridge circuit, which is fed back to the PID controller to compare with the set-point and to generate the control signal. Two MEMS microheaters are used for evaluating the developed control system - a NiCr serpentine microheater for a preconcentrator and a Nickel microheater for ${\underline{P}}olymerase\;{\underline{C}}hain\;{\underline{R}}eaction$ (PCR) chip.

• 한국산학기술학회논문지
• /
• 제15권2호
• /
• pp.1051-1058
• /
• 2014

본 논문에서는 PSPICE 프로그램을 이용하여 멤리스터 소자의 전기적 특성을 해석하였다. 멤리스터의 PSPCE 회로해석을 위한 모델링을 제안하고, 멤리스터의 전류-전압 특성을 분석하였고, 멤리스터의 입력전압에 따른 비선형 저항의 변화를 DC해석과 과도해석을 통하여 확인하였다. 또한, 멤리스터 저항의 직렬과 병렬연결에 따른 특성변화를 보았다. 한편, 멤리스터와 커패시터로 이루어진 M-C 회로를 구성하여 충전과 방전특성의 변화를 종래의 R-C회로와 비교분석하였다. 250 Hz의 구형파 입력신호 인가 시, 멤리스터-커패시터 회로의 경우에, 상승시간(Tr) 0.58 ms, 하강 시간 (Tf) 1.6 ms, 지연시간 0.6ms를 나타내었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 B
• /
• pp.926-928
• /
• 2002

Much progress has been made during the past two decades in numerical analysis of electromagnetic forces in molded case circuit breakers (MCCB) for increasing arc voltage due to the change of the configuration of arc chute and fixed conductor. A review on this topic is given. which mainly covers the past research activities associated with that of our company.

• 전기화학회지
• /
• 제3권1호
• /
• pp.25-30
• /
• 2000

다결정 Pt/0.1 M $H_2SO_4$수성 전해질 계면에서 중간주파수 구간의 위상이동 변화와 Langmuir흡착등온식 사이의 관계를 교류임피던스 방법 즉 위상이동 방법을 이용하여 연구 조사하였다. 제안된 계면등가회로는 전해질저항($R_S$), Faraday저항$(R_F)$, 흡착유사용량$(C_\varphi)$의 등가회로 요소($C_P$)의 직렬접속으로 구성된다 지연되는 위상이동$(\varphi)$은 음전위(E) 및 주파수(f)에 따르며, $\varphi=-tan^{-1}[1/2{\pi}f(R_s+R_F)C_p]$이다. 중간주파수(6Hz)에서 위상이동 변화$(\varphi\;vs.\;E)$는 Langmuir흡착등온식$(\theta\;vs.\;E)$의 결정에 적용할 수 있는 실험적인 방법이다. 다결정 $Pt/0.1\;M\;H_2SO_4$ 전해질 계면에서 수소의 흡착평형 상수(K)와 흡착표준자유에너지$({\Delta}G_{ads})$는 각각 $1.8\times10^{-4}$와 21.4kJ/mol이며 과전위 수소흡착(OPD H)에 기인한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 B
• /
• pp.814-816
• /
• 2002

Because there is a strong interaction between the arc discharge and their surroundings, it is not easy to predict the characteristics of industrial arc plasma systems such as gas circuit breakers. The design procedure of these systems is still largely based on trial and error, although the situation is rapidly improving because of the available computational power at a cost in which is still coming down. The desire to predict the behavior of arc plasma systems, thus optimizing and reducing the develpment cost, has been the motivation of these arc researches. In this paper. we have simulated the switching operation of a gas circuit breaker during high current area using a computational fluid dynamics considered the electric field analysis, the radiation model and the effeects of turbulence.

• 전자공학회논문지C
• /
• 제36C권6호
• /
• pp.37-43
• /
• 1999

고성능 VLSI 설계를 위한 pipeline 형태의 Reed-Solomon을 구현하였다. Shortened RS code의 경우에 있어서 기존의 parallel recursive cell 방식이나[1] 다중 클락 설계와 같은 접근과는 달리 작은 면적에서 단일 클락으로 동작할 수 있는 이중 수소(two-way addressing) 방식의 Euclid 계산을 제안하였다. 이러한 방식은 recursive cell을 병렬 처리하는 Euclid 계산 방식에 비해 면적이나 소비 전력에 있어 장점을 갖고 있음을 synthesis와 전력 모의실험을 통해 검증하였다. 본 설계는 면적상으로 parallerl recursive cell을 이용한 단일 클락euclid 회로가 약 5,000 gate임에 비하여 40% 정도 감소한 3,000 gate 정도에 구현할 수 있었다. 또한 전력 소비면으로는 기존의 recursive cell을 이용한 다중 클락 euclid 회로가 6mW 이상의 전력을 소비하는 반면에 본 설계는 3mW대의 전력 소비를 보여 현격한 차이를 보였다.

• Bulletin of the Korean Chemical Society
• /
• 제15권12호
• /
• pp.1084-1088
• /
• 1994

Electrical characteristics of Fe-substituted sodalites were analyzed and equivalent circuits of samples were designed using impedance and admittance data. Internal components of resistances (R$_e$, R$_b$, and R$_{gb}$) and capacitances (C$_b$, C$_dl$ and C$_D$) could be extracted by changing the frequency of measurement at three different temperatures. Upon increasing the temperature, electrical properties of the samples could be elucidated in detail by equivalent circuit. The substitution of Fe on Al site was indirectly confirmed by ESCA and the results explain the lower polarity in Na-O bond of Fe 10 mole ${\%}$-substituted sodalite.