• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.2430-2434
• /
• 2005

Automatic FPC punching instrument for the improvement of working condition and cost saving is introduced in this paper. FPC(flexible printed circuit) is used to detect the contact position of K/B and button like a cellular phone. Depending on the quality of the printed ink and position of reference punching point to the FPC, the resistance and current are varied to the malfunctioning values. The size of reference punching point is 2mm and the above. Because the punching operation is done manually, the accuracy of the punching degree is varied with operator's condition. Recently, The punching accuracy has deteriorated severely to the 2mm punching reference hall so that assembly of the K/B has hardly done. To improve this manual punching operation to the FPC, automatic FPC punching system is introduced. Precise mechanical parts like a 5-step stepping motor and ball screw mechanism are designed and tested and low cost PC camera is used for the sake of cost down instead of using high quality vision systems for the FA. 3D Mechanical design tool(Pro/E) is used to manage the exact tolerance circumstances and avoid design failures. Simulation is performed to make the complete vision based punching machine before assembly, and this procedure led to the manufacturing cost saving. As the image processing algorithms, dilation, erosion, and threshold calculation is applied to obtain an exact center position from the FPC print marks. These image processing algorithms made the original images having various noises have clean binary pixels which is easy to calculate the center position of print marks. Moment and Least square method are used to calculate the center position of objects. In this development circumstance, Moment method was superior to the Least square one at the calculation of speed and against noise. Main control panel is programmed by Visual C++ and graphical Active X for the whole management of vision based automatic punching machine. Operating modes like manual, calibration, and automatic mode are added to the main control panel for the compensation of bad FPC print conditions and mechanical tolerance occurring in the case of punch and die reassembly. Test algorithms and programs showed good results to the designed automatic punching system and led to the increase of productivity and huge cost down to law material like FPC by avoiding bad quality.

• 대한전자공학회논문지SD
• /
• 제42권2호
• /
• pp.1-8
• /
• 2005

System-on-glass를 위해 poly-Si TFT로 면적이 작으면서도 리플전압을 최소화한 DC-DC 전압 변환회로를 개발하였다. 전압 변환회로는 전하 펌핑 회로, 문턱전압 변화를 보상한 비교기, 오실레이터, 버퍼, 다중 위상 클럭을 만들기 위한 지연 회로로 구성된다. 제안한 다중 위상 클럭킹을 적용함으로써 클럭 주파수 또는 필터링 캐패시터의 증가 없이도 낮은 출력 리플전압을 얻음으로써 DC-DC 변환기의 면적을 최소화 하였다. 제안한 DC-DC 변환회로를 제작하여 측정한 결과 $R_{out}=100k\Omega,\;C_{out}=100pF$, 그리고 $f_{clk}=1MHz$에서 Dickson 구조와 기존의 cross-coupled 구조에서의 리플전압은 각각 590mv와 215mv인 반면 4-위상 클럭킹을 적용한 구조에서는 123mV이다. 그리고 50mV의 리플전압을 가지기 위해 필요한 필터링 캐패시터의 크기는 $I_{out}=100uA$와 $f_{clk}=1MHz$에서 Dickson 구조와 기존의 cross-coupled 구조에서는 각각 1029pF와 575pF인 반면 4-위상과 6-위상 클럭킹을 적용한 구조에서는 단지 290pF와 157pF만이 각각 요구된다. 구조별 효율로는 Dickson 구조의 전하 펌프에서는 $59\%$, 기존의 cross-coupled 구조와 본 논문에서 제안한 4-위상을 적용한 cross-coupled 구조의 전하 펌프에서는 $65.7\%$와 $65.3\%$의 효율을 각각 가진다.

• 한국전자파학회논문지
• /
• 제23권3호
• /
• pp.343-354
• /
• 2012

본 논문에서는 무선 전력 전송을 위한 다양한 스파이럴 구조의 영자 공진기들을 설계하였다. 메타 물질 전송 선로의 영차 공진은 무한 파장의 특징을 가지기 때문에 공진기의 크기에 상관없이 디자인이 가능한 장점을 가진다. 또한, 무선 전력 전송에서 고효율의 전송 효율을 얻기 위해서는 공진기의 Q-factor와 공진기간의 결합 계수가 커야 한다. 따라서 제안된 영차 공진기들은 영차 공진을 유도하기 위해 스파이럴 형태의 인덕터와 집중 캐패시터 소자를 사용하였고, parametric study와 R, L, C 회로 분석을 통해 높은 Q-factor를 얻기 위한 최적의 디자인을 찾고자 하였다. 최적화된 공진기들은 기존의 스파이럴 공진기와 모의 실험을 통해 비교되었으며, 최적화된 공진기들 중 제작된 공진기의 크기는 $20cm{\times}20cm{\times}8cm$($0.009{\lambda}_0{\times}0.009{\lambda}_0{\times}0.004{\lambda}_0$)이고, 13.56 MHz 대역의 주파수와 40 cm 거리에서 80 %의 전송 효율이 측정되었다.

• 센서학회지
• /
• 제23권6호
• /
• pp.368-376
• /
• 2014

In order to measure the segmental impedance of the body, a bioelectrical impedance measurement system (BIMS) using multi-frequency applying method and two-electrode method was implemented in this study. The BIMS was composed of constant current source, automatic gain control, and multi-frequency generation units. Three experiments were performed using the BIMS and a commercial impedance analyzer (CIA). First, in order to evaluate the performance of the BIMS, four RC circuits connected with a resistor and capacitor in serial and/or parallel were composed. Bioelectrical impedance (BI) was measured by applying multi-frequencies -5, 10, 50, 100, 150, 200, 300, 400, and 500 KHz - to each circuit. BI values measured by the BIMS were in good agreement with those obtained by the CIA for four RC circuits. Second, after measuring BI at each frequency by applying multi-frequency to the left and right forearm and the popliteal region of the body, BI values measured by the BIMS were compared to those acquired by the CIA. Third, when the distance between electrodes was changed to 1, 3, 5, 7, 9, 11, 13, and 15 cm, BI by the BIMS was also compared to BI from the CIA. In addition, BI of extracellular fluid (ECF) was measured at each frequency ranging from 10 to 500 KHz. BI of intracellular fluid (ICF) was calculated by subtracting BI of ECF measured at 500 kHZ from BI measured at seven frequencies ranging from 50 to 500 KHz. BI of ICF and ECF decreased as the frequency increased. BI of ICF sharply decreased at frequencies above 300 KHz.

• 전력전자학회논문지
• /
• 제15권1호
• /
• pp.75-85
• /
• 2010

본 연구에서는 비선형 부하에서 발생되는 기본파 무효전력 및 고조파를 보상하기 위한 종전의 전압형 및 전류형 PWM 능동전력필터를 대체 할 수 있는 Z-소스 인버터 토폴로지의 하이브리드 능동전력필터에 대하여 고찰하였다. Z-소스 토폴로지의 능동전력필터의 보상 DC전원으로는 PEMFC가 사용되며, Z-소스 인버터의 shoot-through 듀티비의 조절에 의하여 낮은 연료전지의 전압을 높은 보상 전압으로 부스트 한다. 제안된 시스템은 병렬형 Z-소스 능동전력필터와 7차 고조파 (420Hz) 동조 필터로 구성되며, 이 구성에 의하여 Z-소스 능동전력필터의 스위치 디바이스의 전압 스트레스는 감소된다. 제안된 Z-소스 하이브리드 능동전력필터의 보상 알고리즘으로는 전류 동기 검출법이 사용되었다. 3상 220V/60Hz, 25A급 비선형 다이오드 부하 조건하에서 PSIM 시뮬레이션을 수행하였으며, 정상상태 및 과도상태에서의 제안된 시스템의 보상 성능을 파악하였다.

• 센서학회지
• /
• 제26권5호
• /
• pp.306-313
• /
• 2017

An early detection of infiltration in veins is essential to minimize the injuries caused during infusion therapy, which is one of the most important tasks for nurses in clinical settings. We report that bioelectrical impedance analysis is useful in the early detection of infiltration at puncture sites. When infiltration was intentionally induced in the vein of a rabbit's ear, impedance parameters showed significant difference before and after infiltration. In particular, the relative resistance at 20 kHz in the vein of rabbit's ear reduced largely at infiltration, decreased slowly, and then stayed at a constant value. This indicates that the vein in the ear of the rabbit is small, and hence the infiltrated intravenous (IV) solution no longer accumulates after 3 minutes of infiltration. However, when infiltration was induced in the vein of a human's forearm, the relative resistance at 20 kHz decreased gradually over time. In the $R-X_c$ graph, the positions in infiltration induced in the rabbit's ear rapidly shifted before and after infiltration whereas the positions in infiltration induced in the human's forearm changed gradually during infiltration. Our findings suggest that bioelectrical impedance analysis is an effective method to detect the infiltration early in a noninvasive and quantitative manners.

• Corrosion Science and Technology
• /
• 제6권2호
• /
• pp.50-55
• /
• 2007

The smaller size and higher integration of advanced electronic package systems result in severe electrochemical reliability issues in microelectronic packaging due to higher electric field under high temperature and humidity conditions. Under these harsh conditions, electronic components respond to applied voltages by electrochemical ionization of metal and the formation of a filament, which leads to short-circuit failure of an electronic component, which is termed electrochemical migration. This work aims to evaluate electrochemical migration susceptibility of the pure Sn, Sn-3.5Ag, Sn-3.0Ag-0.5Cu solder alloys in $Na_{2}SO_{4}$. The water drop test was performed to understand the failure mechanism in a pad patterned solder alloy. The polarization test and anodic dissolution test were performed, and ionic species and concentration were analyzed. Ag and Cu additions increased the time to failure of Pb-free solder in 0.001 wt% $Na_{2}SO_{4}$ solution at room temperature and the dendrite was mainly composed of Sn regardless of the solders. In the case of SnAg solders, when Ag and Cu added to the solders, Ag and Cu improved the passivation behavior and pitting corrosion resistance and formed inert intermetallic compounds and thus the dissolution of Ag and Cu was suppressed; only Sn was dissolved. If ionic species is mainly Sn ion, dissolution content than cathodic deposition efficiency will affect the composition of the dendrite. Therefore, Ag and Cu additions improve the electrochemical migration resistance of SnAg and SnAgCu solders.

• 대한전자공학회논문지
• /
• 제10권1호
• /
• pp.18-26
• /
• 1973

AM파의 검파에 있어서 반송파의 주파수와 변조신호의 현파수와의 비가 10:1 이하로 되면 종래의 AM검파기로는 만족할만한 파형의 검파출력을 얻을 수 없다. 이와같이 초광대성 AM신호의 검파가 불가능하였든 것은 검파회로내에 있는 R-C 회로의 충방전현상으로 인한 것이며 이것이 AM 또는 FM초다중통신의 통신용량을 제안하는 한 원인이되고 있다. 본논문에서는 이 문제의 해결책으로서 다상포낙선검파법을 제안하며 아울러 동검파법의 이론적인 해석도 제시하였다. 본다상포낙선검파법을 이용하면 AM파의 반송파의 편파수와 변조신호의 편파수와의 비가 1:1에 가까울때에도 요구되는 여하한 충실도라도 충족시킬수 있는 AM검파파형을 얻을 수 있다. 본다상포낙선검파법의 이론적인 뒷받침을 위하여 본논문에서 제창한 두가지의 구성방안중에서 주파수변환방식을 대하여 실험하였다.