• 한국국방경영분석학회지
• /
• 제4권1호
• /
• pp.113-123
• /
• 1978

Consider a series system of two units, named 1 and 2, respectively. Two units are observed at the beginning of discrete time periods t=0,1,2, $cdots$ and classified as being in one of a countable number of states. Let (i, r) be a state of the system at time t, when the state of unit 1 is i and state of unit 2 is r at time t, Under some conditions, the opportunistic replacement policy that minimizes the expected total discounted cost or the average cost of maintenance is shown to be characterized by the control limits $i^{*}(r)$ (a function of r) and $r^{*}(i)$ (a function of i) : (a) in observed state (i, r), the optimal policy for unit 1 is to replace if $i{\ge}i^{*}(r)$ and no action otherwise; (b) in observed state (i, r), the optimal policy for unit 2 is to replace if $r{\ge}r^{*}(i)$ and no action otherwise. In addition, this paper also develops optimal policy in the finite time horizon case, where time horizon is fixed or a finite integer valued r.v. with known pmf.

• 중소기업융합학회논문지
• /
• 제6권4호
• /
• pp.123-129
• /
• 2016

본 연구는 노인환자의 사전의료의향서에 대한 태도를 결정하는데 영향을 주는 요인을 파악하기 위해 충남 소재 요양병원 5곳과 종합병원 1곳에 입원한 65세 이상의 노인 환자를 대상으로 조화된 설문지를 이용하여 조사하였다. 사전의료의향서에 대한 태도는 2.84점으로 평균이상 수준, 가족기능은 2.73점으로 평균 이하의 수준이었으며, 자기효능감은 3.45점으로 평균 이상의 수준이었다. 연구 결과, 가족기능이 좋을수록 사전의료의향서에 대한 태도가 부정적(r=.-.324, p<.01)이었으며, 자기효능감이 좋을수록 사전의료의향서에 대한 태도가 긍정적인 것으로 나타났다(r=.340, p<.01). 본 연구는 사전의료의향서가 국내에 정착하는데 기여할 것이다.

• 한국작물학회지
• /
• 제49권6호
• /
• pp.452-456
• /
• 2004

약쑥의 eupatilin과 jaceosidin을 분리하여 그 화학구조를 분광학적 방법(^1H\;and\;^{13}C-NMR,\;MS)$으로 확인하였다. 이를 지표물질로 하여 HPLC분석조건과 HPLC용 검체의 조제, 표준 검량선을 작성하였다. 약쑥 eupatilin 성분의 검량선은 y=76069x+107329(r=0.9999), jaceosidin은 y=76651x+77399(r=0.9996)으로 각각 직선성이 인정되었다. 강화사자발쑥의 잎에는 eupatilin이 240mg(100g 잎), jaceosidin이 10mg(100g 잎) 함유되어 있고, 싸주아리쑥의 잎에는 eupatilin이 330mg(100g 잎), jaceosidin이 123mg(100g 잎)씩 각각 함유되어 있음이 확인되었다.

• 융합정보논문지
• /
• 제12권2호
• /
• pp.107-115
• /
• 2022

본 연구의 목적은 중소병원 간호사의 감염관리 지식, 표준주의 수행도를 파악하고 표준주의 수행도에 미치는 영향 요인을 규명하기 위함이다. 본 연구는 횡단적 서술적 조사연구 방법으로 7개 중소병원 간호사 258명을 대상으로 수행되었다. 감염관리 지식은 평균 7.25점, 표준주의 수행도는 평균 3.61점이었으며, 임상경력(r=.123, p=.047)과 직위(F=5.356, p=.005)에 따라 표준주의 수행도에 차이를 보였다. 감염관리 지식과 표준주의 수행도 간에는 통계적으로 유의한 양의 상관관계가 있었으며(r=.421, p<.001), 표준주의 수행도에 영향을 미치는 요인은 직위(β=-.187, p=.025)와 감염관리 지식(β=.408, p<.001)으로 나타났다. 중소병원 간호사의 의료관련감염 관리를 위한 표준주의 수행도를 증진시키기 위한 방안으로 일반간호사를 대상으로 감염관리에 대한 융복합 교육이 요구된다.

• Journal of Korean Biological Nursing Science
• /
• 제19권3호
• /
• pp.123-130
• /
• 2017

Purpose: This study aimed to identify factors influencing intra-operative core body temperature (CBT), and to develop a predictive model for intra-operative CBT in laparoscopic abdominal surgery. Methods: The prospective observational study involved 161 subjects, whose age, weight, and height were collected. The basal pre-operative CBT, pre-operative blood pressure, and heartbeat were measured. CBT was measured 1 hour and 2 hours after pneumoperitoneum. Results: Explanatory factors of intra-operative hypothermia (< $36^{\circ}C$) were weight (${\beta}=.361$, p< .001) and pre-operative CBT (${\beta}=.280$, p= .001) 1 hour after pneumoperitoneum (Adjusted $R^2=.198$, F= 7.56, p< .001). Weight was (${\beta}=.423$, p< .001) and pre-operative CBT was (${\beta}=.206$, p= .011) 2 hours after pneumoperitoneum (Adjusted $R^2=.177$, F= 5.93, p< .001). The researchers developed a predictive model for intra-operative CBT ($^{\circ}C$) by observing intra-operative CBT, body weight, and pre-operative CBT. The predictive model revealed that intra-operative CBT was positively correlated with body weight and pre-operative CBT. Conclusion: Influence of weight on intra-operative hypothermia increased over time from 1 hour to 2 hours after pneumoperitoneum, whereas influence of pre-operative CBT on intraoperative hypothermia decreased over time from 1 hour to 2 hours after pneumoperitoneum. The research recommends pre-warming for laparoscopic surgical patients to guard against intra-operative hypothermia.

• 한국운동역학회지
• /
• 제25권1호
• /
• pp.123-130
• /
• 2015

Purpose : The purpose of this study was to investigate the reliability of 3D-inertia measurement unit (IMU) based shoes in gait analysis. This was done with respect to the results of the optical motion capturing system and to collect reference gait data of healthy subjects with this device. Methods : The Smart Balance$^{(R)}$ system of 3D-IMU based shoes and Osprey$^{(R)}$ motion capturing cameras were used to collect motion data simultaneously. Forty four healthy subjects consisting of individuals in 20s (N=20), 40s (N=13), and 60s (N=11) participated in this study voluntarily. They performed natural walking on a treadmill for one minute at 4 different target speeds (3, 4, 5, 6 km/h), respectively. Results : Cadence (ICC=.998), step length (ICC=.970), stance phase (ICC=.845), and double-support phase (ICC=.684) from 3D-IMU based shoes were in agreement with results of optical motion system. Gait data of healthy subjects according to different treadmill speeds and ages were matched to previous literature showing increased cadence and reduced step length for elderly subjects. Conclusion : Conclusively, 3D-IMU based shoes in gait analysis were a satisfactory alternative option in measuring linear gait parameters.

• 소성∙가공
• /
• 제22권3호
• /
• pp.123-132
• /
• 2013

Hot stamping, which is the hot pressing of special steel sheet using a cold die, can combine ease of shaping with high strength mechanical properties due to the hardening effect of rapid quenching. In this paper, a thermo-mechanical analysis of hot stamping using the finite element method in conjunction with phase transformations was performed in order to investigate the plastic deformation behavior, temperature history, and mechanical properties of the stamped car part. We also conducted a fully coupled thermo-mechanical analysis during the stamping and rapid quenching process to obtain the mechanical properties with the consideration of the effects of plastic deformation and phase transformation on the temperature histories at each point in the part. The finite element analysis could provide key information concerning the temperature histories and the sheet mechanical properties when the phase transformation is properly considered. Such an analysis can also be used to determine the effect of cyclic cooling on the tooling.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제25권1호
• /
• pp.123-127
• /
• 2012

An experiment was carried out to boost the production of tasar crops through application of secondary nutrients. Different combinations of secondary nutrients were prepared and its effect was studied on the yield and quality of leaves of tasar food plant Terminalia tomentosa W & A with 2.4 m ${\times}$ 2.4 m spacing and cocoon characters of tasar silkworm Antheraea mylitta Drury reared on them. Among different combinations of secondary nutrients, foliar application of magnesium sulphate (2%, w/v) and basal application of 3 quintal/ha of calcium carbonate (secondary nutrient combination SM5) was found to be the best in crop improvement. It improves the quantity and quality of leaves as well as the commercial characters of cocoons. As a result, silk production improves. Under this combination, leaf yield increased by 26.55% in comparison to control. Average increase in moisture, total mineral, crude protein and total carbohydrate was 3.26%, 20.84%, 15.39% and 17.85% respectively as compared with control. Further, bio assay studies revealed that average larval weight, E.R.R., cocoon weight, shell weight and silk ratio percent increased by 11.25%, 25.71%, 20.05%, 35.14% and 12.17% respectively over control which indicates that secondary nutrient combination $SM_5$ has significant role in improving the production of tasar crops.

• 산업경영시스템학회지
• /
• 제33권3호
• /
• pp.123-129
• /
• 2010

R&D innovation is based on the premises of gaining competitive advantage. Innovation is achieved not only through the development of technology for producing newer and better products, but also gaining and sharing information about consumer demands, changes in the market, and competitors actions. Investment in R&D can not adequately be fulfilled solely through market functions because of R&D activities imply high-risk, uncertainty, and because R&D has a public-good characteristic. Most past researches have concentrated on managerial methodologies through research of performance, thus the results are related to studies of innovation performance. This research looks into the effect given on R&D innovation by IT factors and provides a model, and further analysis on how IT factors are applied through this model. By developing a model through the process of re-structuring the model with variables based on the convergent and discriminant validity, and in turn confirming and concentrating on major IT factors through analysis, it will be possible to double the R&D Innovation Performance.

• 한국군사과학기술학회지
• /
• 제22권1호
• /
• pp.106-123
• /
• 2019

Demand for performance analysis is increasing for efficient use of limited budgets such as improving investment efficiency and strategic budget allocation in accordance with the continuous increase demand of R&D budget for developing advanced weapon systems in the future battlefields. In accordance with the Act on the Performance Evaluation and Performance Management of the National R&D Projects established in March 2006, the performance analysis has been conducted for the systematic management and utilization of the R&D project performance. It was recognized as a project to achieve self-defense through strengthening the weapons system development capability, however, efficiency evaluation of Defense R&D projects was not much emphasized. Research on the efficiency analysis of defense R&D projects has been conducted in recent years, but most studies focused on corporate efficiency and productivity of defense companies. In this study, we analyzed the three-stage performance of defence R&D projects based on the logical model using the data envelope analysis(DEA) model. We also analyzed performance analysis from various perspectives through R&D type, technology classification and performance model. This study is expected to help defense department improve defense R&D projects and make decision.