• 한국재료학회지
• /
• 제24권11호
• /
• pp.610-616
• /
• 2014

In this study, we investigated the precipitation behavior of the R-phase precipitated at the initial stage of aging and its effect on the pitting corrosion of 25%Cr-7%Ni-4%Mo super duplex stainless steel. The R-phase in super duplex stainless steel was mainly precipitated at the interface of ferrite/austenite phases and inside of the ferrite phase during the initial stage of aging, and it was transformed into the ${\sigma}$-phase with an increase in aging time. The ferrite phase was decomposed into a new austenite phase and ${\sigma}$-phase. The R phase was an intermetallic compound, which represented a lower Ni and higher Mo than the matrix, and also had a higher Mo and Cr concentration than the ${\sigma}$ phase. With an increasing aging time, the pitting potential $E_p$ was increased slowly by the precipitation of the R-phase, and it was then steeply decreased by the precipitation of the ${\sigma}$-phase. The R-phase was decreased the pitting potential, but its effect was smaller than effect of ${\sigma}$-phase.

• 한국재료학회지
• /
• 제24권8호
• /
• pp.401-406
• /
• 2014

In this study, we investigated the precipitation behavior of the R-phase precipitated at the initial stage of aging and its effects on the mechanical properties of 25%Cr-7%Ni-2%Mo-4%W super duplex stainless steel. The R-phase was mainly precipitated at the interface of ferrite/austenite phases and inside of the ferrite phase during the initial stage of aging. It was transformed into the ${\sigma}$-phase with an increase of the aging time. The ferrite phase was decomposed into a new austenite(${\gamma}_2$)phase and the ${\sigma}$-phase by an aging treatment. The R phase was an intermetallic compound showing higher molybdenum and tungsten concentrations than the matrix and also showed higher molybdenum and tungsten concentrations than the ${\sigma}$ phase. In the initial stage of aging, precipitation of the R-phase did not change the hardness, the strength and the elongation. The hardness and the strength increased upon a longer aging time, but the elongation rapidly decreased. These results show that the R-phase did not significantly affect the hardness and the strength, though it did influence the elongation.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2273-2278
• /
• 2007

Brazed Plate Heat Exchanger (BPHE) is a type of compact plate heat exchanger with parallel corrugated plates which are brazed together in series. Each plate hascorrugation called herringbone pattern. Inside a BPHE, hot fluid and cold fluid alternate its flow direction to establish counter current flow configuration. Two-phase flow heat transfer and pressure drop of R-22 in BPHE were experimentally measured in this study. In the present experiments, single-phase region and two-phase region coexist in a BPHE. Therefore, the inside of a BPHE have to be divided into single phase region and two phase region and analyzed accordingly. The results from the single phase flow analysis are then extended to the two phase flow analysis to correlate the condensation and evaporation heat transfer and pressure drop for the refrigerant R-22 in the BPHEs. Previous models for two- phase friction factor have been compared with the present experimental results.

• 대한의용생체공학회:의공학회지
• /
• 제2권1호
• /
• pp.39-46
• /
• 1981

Microstructural phases of the dental amalgams have been studied by optical microscope, scanning electron microprobe and X-ray diffractometer. r1 ($Ag_2Hg_3$) phase and r2 ($Sn_{7-8}Hg$) phase are found on conventional compositioned alloys. On high copper single compositioned alloy, rl ($Ag_2Hg_3$) phase and V ($Cu_6Sn_5$) phase are found but brittle r2 ($Sn_(7-8)Hg$) phase.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.337-340
• /
• 1999

Since the first reports of CMR(colossal magnetoresistance) effects in some single crystal R-P Phase Ln$_{1-x}$ Sr$_{2-x}$Mn$_{2}$O$_{7}$ 1996. many researches have been carried out to find optimum compositions and processing conditions in this system. In this study, layered perovskite R-P Phase Ln$_{1-x}$ Sr$_{2-x}$Mn$_{2}$O$_{7}$ (x=0.4, Ln=-La, Eu, Gd, Nd, Pr, Sm) phases were synthesized by solid state reaction and their structures were refined by Rietveld method. Electrical and magnetic properties were measured drown to 20K and compare with those of R-P Phase Ln$_{1-x}$ Sr$_{2-x}$Mn$_{2}$O$_{7}$ Phases.es.es.es.es.es.

• Corrosion Science and Technology
• /
• 제22권1호
• /
• pp.64-72
• /
• 2023

Ni-Ti shape memory alloy for dental nerve treatment devices was prepared by adding Mo to Ni-Ti alloy to improve flexibility and fatigue fracture characteristics and simultaneously increase corrosion resistance. Surface properties of the alloy were evaluated. Microstructure analysis of the Ni-Ti-xMo alloy revealed that the amount of needle-like structure increased with increasing Mo content. The shape of the precipitate showed a pattern in which a long needle-like structure gradually disappeared and changed into a small spherical shape. As a result of XRD analysis of the Ni-Ti-xMo alloy, R-phase structure appeared as Mo was added. R-phase and B2 structure were mainly observed. As a result of DSC analysis, phase transformation of the Ti-Ni-Mo alloy showed a two-step phase change of B2-R-B19' transformation with two exothermic peaks and one endothermic peak. As Mo content increased, R-phase formation temperature gradually decreased. As a result of measuring surface hardness of the Ti-Ni-Mo alloy, change in hardness value due to the phase change tended to decrease with increasing Mo content. As a result of the corrosion test, the corrosion potential and pitting potential increased while the current density tended to decrease with increasing Mo content.

• 한국광학회지
• /
• 제34권3호
• /
• pp.99-105
• /
• 2023

천체망원경의 성능은 여러가지 요소에 의해 결정된다. 대기 난류도 그 중 하나인데, 대기 난류는 망원경으로 수집한 빛을 왜곡시켜 이미지의 선명도와 해상도를 저하시킨다. 때문에 대기 난류를 보정하기 위한 기술이 연구되어 왔다. 보정 기술을 연구하기 위해서는 대기 난류를 실험실에서 모사해야 하며, 그 중 가장 실용적인 방법으로 위상판을 이용한 방법이 있다. 심한 난기류를 모사한 위상판을 측정할 때에는 주로 샥하트만 파면 센서로 측정하게 된다. 이 때, 레이저 광원은 위상판을 거쳐 샥-하트만 파면 센서로 들어가게 되는데 위상판을 거치면서 레이저의 세기가 줄어들고, 이로 인해 샥-하트만 파면 센서가 위상판을 측정하지 못하는 경우가 발생한다. 본 논문에서는 난기류를 모사한 위상판 측정 시 레이저 출력 조절의 필요성과 레이저 출력이 측정된 파면에 어떤 영향을 미치는지를 알아본다. 프라이드 파라미터 r₀이 상대적으로 낮은 위상판의 경우 레이저 출력으로 인해 10% 이상 r₀이 변화하였다. r₀이 상대적으로 높은 위상판의 경우 레이저 출력으로 인한 변화가 5% 미만으로 r₀이 거의 변하지 않음을 보였다. 따라서 난기류가 심한 대기 상태를 모사한 위상판일수록 레이저 출력의 영향이 미미함을 알 수 있었다. 또한, 본 논문의 시스템을 기준으로 레이저 출력 5 mW 이상에서 난기류를 모사한 위상판을 측정할 수 있었다.

• 대한전자공학회논문지
• /
• 제13권6호
• /
• pp.12-15
• /
• 1976

본논문은 현재 AF주파수변역에서 90° 정위상기를 실현하고 있는 방법과는 전혀 다른 착상으로 VHF 고파수대에서 90° 정위상기를 실현하는 새로운 방법을 제시하였다. 이 90° 정위상기의 구조는 간단하며 분포정수소자인 전송선과 집중정수소자인 R.L.C로 용이하게 실현된다. This paper presents the realization method of 90° constant phase shifter in the VHF band, constructed by the entirely differens idea from the conventional method of the realization of constant phase shifter in the audio frequency range. The construction of 90° constant phase shifter is. simple and can be easily realized by using the distributed constant element, transmission line, and the lumped constant elements, R,C,L.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 1999년도 추계연구발표회 논문개요집
• /
• pp.74-75
• /
• 1999

• 대한화장품학회지
• /
• 제39권2호
• /
• pp.83-88
• /
• 2013

수성 이상계는 물에 친수 성분만을 용해시킨 후 용해 물질들 사이에 유발되는 단순한 물리적 불친화성에 의해 액상 다중 층으로 분리되기 때문에 생체적합성에 대한 장점을 가지고 있다. 본 연구에서는 물에 친수 성분만을 용해시킨 후 두 층으로 분리되는 수성 이상계 상분리 원리를 수성 다중 층 액상 화장료에 응용하여 수성 다중 층 화장료에 적용이 가능한 대표적인 두 종의 수성 이상계를 선정하였으며, 이들에 대해 바이노달 곡선과 임계점 및 농도 대응선 그리고 새로운 개념의 상분리 부피 및 상분리 시간 대응곡선을 포함하는 상도를 실험을 통해 작성하였으며, 상 도표로부터 액상 다중 층으로 분리되는 최적의 조건을 관찰할 수 있었다.