• Journal of the Korean Magnetics Society
• /
• v.22 no.1
• /
• pp.19-22
• /
• 2012

$Ba_2Mg_{0.5}Co_{1.5}(Fe_{0.99}In_{0.01})_{12}O_{22}$ was prepared by the conventional solid-state reaction method, and studied by x-ray diffractometer, vibrating sample magnetometer, and Mossbauer spectrometer. The crystal structure was determined to be a single-phased rhombohedral with space group R-3m. Magnetization value were $M_s$ = 28.6 emu/g at 295 K. The hysteresis loops indicate that all the samples are ferrimagnetic behaviors. Mossbauer spectra of $Ba_2Mg_{0.5}Co_{1.5}(Fe_{0.99}In_{0.01})_{12}O_{22}$ have been 6-sextet taken at various temperatures ranging from 4.2 to 620 K. Based on the isomer shift (${\delta}$) values of all samples, the charge states were found to be $Fe^{3+}$ state at all temperatures, the Curie temperature was determined to be 630 K by the ZVC curve.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.31 no.5
• /
• pp.622-630
• /
• 1998

Rotating Biological Contactor (RBC) was tested for the removal of total ammonia nitrogen (TAN) by using simulated aquaculture system. RBC performance was evaluated by controlling revolution rate of disk and hydraulic residence tile (HRT). The optimum revolution rate of disk was 4 rpm, As HRT of RBC was increased, TAN removal efficiency of RBC and TAN concentration of rearing water were increased. HRT for maintaining lowest TAN concentration of rearing water was 9.5 minutes and at that condition TAN concentration of rearing tank was $1.03 g/m^3$

• Journal of Korean Society of Forest Science
• /
• v.108 no.4
• /
• pp.484-492
• /
• 2019

The aim of the present study was to compare the cold tolerance of seven different types of trees growing in southern Korea to select evergreen broad-leaved trees that can be used as street trees in large land areas experiencing climate change. The trees compared were the thorn tree, Cinnamomum camphora, Camellia japonica, Machilus thunbergii, Dendropanax morbifera, Daphniphyllum macropodum Miq., Quercus glauca Thunb., and Raphiolepis indica. When the trees were subjected to low temperature treatment, their electrolyte elution volume values appeared to increase with the decreases in the treatment temperature. The analysis of the cold tolerance of each type of tree was based on the estimated temperatures in the following order: C. japonica (-11.586℃) > R. indica (-9.348℃) > Q. glauca (-8.719℃) > M. thunbergii (-8.090℃) > D. macropodum (-7.409℃) > D. morbifera (-7.085℃) > C. camphora (-6.995℃). The relative cold tolerance difference found in the seven tree species was more than 5℃, as evaluated previously. In the Lauraceae family, the difference in cold tolerance was more than 2℃, even in the same species. The analysis showed that trees with excellent cold tolerance included Q. glauca Thunb., C. japonica, R. indica, and the thorn tree. This knowledge is required for the evaluation of the possibility of the survival of trees under cold temperature conditions in cities.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.7
• /
• pp.55-62
• /
• 2005

The use of the bearing capacity equation is subjected to several uncertainties. In this study, estimation of the bearing capacity of footings based on the cone resistance q$_{c}$ is investigated. Non-linear finite element analyses based on a state-dependent stress-strain model were performed to obtain the load-settlement responses of axially loaded circular footings. Various soil and footing conditions, including different relative densities, depths of embedment, and footing diameters were considered in the analyses. Based on the finite element results, load-settlement curves were obtained and used to determine the unit limit bearing capacity in terms of the cone resistance q$_{c}$ for footings subjected to surcharge. Values of the unit bearing capacity for different embedment depths were in a narrow range, while considerable variation was observed with relative density D$_{R}$. It was observed that the unit limit bearing capacity normalized with respect to q$_{c}$ decreases as D$_{R}$ increases for a given surcharge.

• Journal of KIISE:Databases
• /
• v.30 no.5
• /
• pp.451-463
• /
• 2003

Recently, there have been various research efforts to develop strategies for accelerating OLAP operations on huge amounts of spatio-temporal data. Most of the work is based on multi-tree structures which consist of a single R-tree variant for spatial dimension and numerous B-trees for temporal dimension. The multi~tree based frameworks, however, are hardly applicable to spatio-temporal OLAP in practice, due mainly to high management cost and low query efficiency. To overcome the limitations of such multi-tree based frameworks, we propose a new approach called Hilbert Cube(H-Cube), which employs fractals in order to impose a total-order on cells. In addition, the H-Cube takes advantage of the traditional Prefix-sum approach to improve Query efficiency significantly. The H-Cube partitions an embedding space into a set of cells which are clustered on disk by Hilbert ordering, and then composes a cube by arranging the grid cells in a chronological order. The H-Cube refines cells adaptively to handle regional data skew, which may change its locations over time. The H-Cube is an adaptive, total-ordered and prefix-summed cube for spatio-temporal data warehouses. Our approach focuses on indexing dynamic point objects in static spatial dimensions. Through the extensive performance studies, we observed that The H-Cube consumed at most 20% of the space required by multi-tree based frameworks, and achieved higher query performance compared with multi-tree structures.

• Journal of Sensor Science and Technology
• /
• v.8 no.5
• /
• pp.359-367
• /
• 1999

CsI(Li) single crystals doped with 0.02, 0.1, 0.2 and 0.3 mole% lithium as an activator were grown by Czochralski method. The lattice structure of grown CsI(Li) single crystal was bcc, its lattice constant was $4.568\;{\AA}$. The absorption edge of CsI(Li) single crystal was 245 nm, and the spectral range of luminescence was $300{\sim}600\;nm$, its maximum luminescence intensity appeared at 425 nm. The energy resolutions of CsI(Li) single crystal doped with 0.2 mole% lithium were 14.5% for $^{137}Cs$(662 keV), 11.4% for $^{54}Mn$(835 keV) and 17.7% and 7.9% for $^{22}Na$(511 keV and 1275 keV), respectively. The relation formula of $\gamma$-ray energy versus energy resolution was ln (FWHM%) = -0.893lnE + 8.456 and energy calibration formula was ${\log}E_r=1.455\;{\log}(ch.)-1.277$. The phosphorescence decay time of CsI(Li) crystal doped with 0.2 mole% lithium was 0.51 s at room temperature, and its time resolution measured by CFT(constant-fraction timing method) was 9.0 ns.

• Analytical Science and Technology
• /
• v.24 no.1
• /
• pp.10-14
• /
• 2011

This study was performed to compare international analytical methods of bromide and applied to determine bromide in bottled mineral water and raw ground water in Korea. Bromide in water was eluted by 10~50 mM potassium hydroxide (KOH) and determined by ion chromatography-suppressed conductivity detector (IC-CD). Sample was purified with Ba- and H-on-guard cartridge and $0.2\;{\mu}m$ membrane filter. The method detection limit (MDL) and the limit of quantitation (LOQ) of bromide were 0.2 and $0.5\;{\mu}g/L$, respectively. The calibration curve showed good lineality above 0.9993 in the ranges of the $0.5\sim80\;{\mu}g/L$. A correlation coefficient of bromide in ground water and sum of bromide and bromate in bottled mineral water is 0.808.

• Journal of radiological science and technology
• /
• v.35 no.2
• /
• pp.109-117
• /
• 2012

The purpose of this work was to evaluate an amorphous silicon cesium iodide based indirect flat-panel detector (FPD) in terms of their modulation transfer function (MTF), Wiener spectrum (WS, or noise power spectrum, NPS), and detective quantum efficiency (DQE). Measurements were made on flat-panel detector using the International Electrotechnical Commission (IEC) defined RQA3, RQA5, RQA7, and RQA9 radiographic technique. The MTFs of the systems were measured using an edge method. The WS(NPS) of the systems were determined for a range of exposure levels by two-dimensional (2D). Fourier analysis of uniformly exposed radiographs. The DQEs were assessed from the measured MTF, WS(NPS), exposure, and estimated ideal signal-to-noise ratios. Characteristic curve in the RQA3 showed difference in the characteristic curve from RQA5, RQA7, RQA9. MTFs were not differences according to x-ray beam quality. WS(NPS) was reduced with increasing dose, and RQA 3, RQA5, RQA7, RQA9 as the order is reduced. DQE represented the best in the 1mR, RQA 3, RQA5, RQA7, RQA9 decrease in the order. The physical imaging characteristics of FPD may also differ from input beam quality. This study gives an initial motivation that the physical imaging characteristics of FPD is an important issue for the right use of digital radiography system.

• Korean Journal of Food Science and Technology
• /
• v.30 no.4
• /
• pp.832-841
• /
• 1998

In order to economically utilize flour brew with Bifidobacterium bifidum as a bread improver, the effect of flour brew on the rheological properties of dough, growth curve and acid production, and symbiosis with yeast were investigated. Growth of bifidobacteria was not increased more than initial seed volume but was consistent during 24 hours of incubation. pH was decreased and T.T.A was increased up to 12 hours of incubation. Symbiosis between bifidobacteria and yeast was little. Bifidobacteria produced more lactic acid than acetic acid in flour brew and the opposite in skim milk broth. This result was inferred from Lactobacillus sp. inherent in flour. On rheological properties of dough, farinograms of flour showed progressively decreasing baking absorption, mixing time and stability as the amount of flour brew increased. The validation of extensograms showed that R/E ratio linearly increased with increment of flour brew, and nearly doubled in all treatments comparing to that of control, which suggest the reduction of actual fermentation time. On visco/amylograms, malt index increased with addition of flour brew, accordingly showing the decrease in viscosity. Break down and set back value decreased with increment of flour brew, suggesting that staling rate of bread can be delayed.

• Journal of the Korean Chemical Society
• /
• v.36 no.1
• /
• pp.87-94
• /
• 1992

The elution behavior of polystyrenes(PS), polymethylmethacrylates (PMMA), polybutadienes(PB), PS-PMMA(SM) block copolymers and PS-PB star shaped copolymers on the cross-linked polystyrene gels was studied. An interpretation was proposed for the plots of log hydrodynamic volume versus retention volume of solutes in the mobile phases such as tetrahydrofuran, toluene, chloroform, methylene chloride and tetrahydrofuran-cyclohexane mixture. In order to predict the retention of solutes from their physical properties, multiple stepwise regression analysis was applied to obtain the correlation. The distribution coefficients($K_p$) of solute-gel interactions in GPC for homopolymers and PS copolymers were also obtained in terms of network-limited separation mechanism. In the cases of PS and PB, $K_p$ values approach unity, while $K_p$ values for PMMA decrease as MW increase in the good solvent, but in poor solvent, $K_p$ values increase as MW increase. $K_p$ values of PS copolymers are dependent on their MW and composition, therefore, morohology of SM block copolymer is predicted to be random phase. A single universal plot of log[η]M vs. $(V_r-V_o)/K_p$