• 한국초전도ㆍ저온공학회논문지
• /
• 제24권3호
• /
• pp.30-34
• /
• 2022

Effects of electron beam (EB) irradiation on the mechanical strength of Cu (conducting sheath) and Nb (diffusion barrier) of Cu/Nb/MgB₂ superconducting was investigated. Wire- and tape-type Cu/Nb/MgB₂ samples were irradiated at E-beam energy of 2.5 MeV and 5 mA and a maximum E-beam dose was 5×10¹⁷ e/m². The hardness value of Cu and Nb region was measured by the Vickers micro-hardness method. In the case of the wire sample, the hardness of Cu and Nb increased proportionally as the dose was increased up to 5×10¹⁷ e/m², whereas in the case of the tape sample, the hardness increased up to a dose of 0.5×10¹⁷ e/m², and decreased slightly 5×10¹⁷ e/m². The hardness increase of Cu and Nb is believed to be due to the decrease of the deformability of Cu and Nb due to the defects formed inside the materials by E-beam irradiation.

• 한국진공학회지
• /
• 제5권3호
• /
• pp.245-250
• /
• 1996

$Y_2O_3$ thin film on si(100) was successfully grown by ionized cluster beam(ICBD) technique at substrate temperature of around $500^{\circ}C$ and pressure of ~$10^{-5}$Torr.To prevent the oxidation of Si substrae, a very thin yttrium layer was deposited on Si before reactive depositing of oxygen and yttrium source. In asdeposited stage, b.c.c and h.c.p strucutres of $Y_2O_3$ were observed from S-ary analysis. From the observation of spots and ring patterns in selected area diffractin(SAD) patterns. crystallane formation and growth could be proceeded during the deposition. $Y_2O_3$/mixed layer/$SiO_2=170\AA/50\AA/10\AA$ structure were verified by high resolution transmition electron imcroscopy(HRTEM) image, and the formation of amorphous layer of SiO2 was discussed . Electricla charateristics of the film were also investigated . In as-deposited Pt/$Y_2O_3$/Si sturcuture, leakage current was less than $10^{-6}$A/$\textrm{cm}^2$ at 7MV/cm strength.

• 대한토목학회논문집
• /
• 제7권2호
• /
• pp.79-88
• /
• 1987

본(本) 연구(硏究)는 체계신뢰성방법(體系信賴性方法)에 기초(基礎)하여 R.C. 도로교(道路橋) 상부구조(上部構造)의 체계신뢰성(體系信賴性) 모형(模型)을 제안(提案)하는데 주안점을 두고 있다. R.C. T 항교(桁橋)에서 두개의 인접거어더가 파괴될때 상부구조(上部構造)가 극한내하력상관(極限耐荷力狀觀)에 도달된다는 근사적인 가정(假定)하에 Level 2 체계모형화(體系模型化)시켜 병직렬(並直列)(parallel-series)체계(體系)의 파괴확률(破壞確率)을 구(求)하는 점추정(點推定) 해법(解法)을 실용적(實用的)인 쳬계신뢰성(體系信賴性) 해법(解法)으로 제안(提案)하였다. 제안(提案)된 체계신뢰성모형(體系信賴性模型)을 실제(實際) 보존교량(보存橋梁)에 적용(適用)하여 각(各) 파괴요소(破壞要素) 및 破壞(破壞)모드간(間) 상관계수(相關係數)의 변화(變化)에 따른 쳬계신뢰성(體系信賴性)의 예민도(銳敏度) 분석(分析)을 행(行)하였으며 요소신뢰성(要素信賴性)과 체계신뢰성(體系信賴性)의 관계(關係)도 고찰(考察)하였다. 본(本) 연구(硏究)에서 제시(提示)하는 점추정방법(點推定方法)에 의한 체계신뢰성(體系信賴性)은 Ditlevsen 구간해(區間解)의 평균치(平均値)에 해당하는 안전측해(安全側解)를 나타내었다. 또한 체계신뢰성(體系信賴性) ${\beta}_s$는 각(各) 파괴요소(破壞要素) 및 파괴(破壞)모드간(間) 상관계수(相關係數)의 변화(變化)에 대단히 예민(銳敏)하게 변화(變化)하는 것을 알수 있었다. 본(本) 연구(硏究)에서 제시(提案)한 체계신뢰성(體系信賴性) 모형(模型)에 의한 근사해법(近似解法)으로 실제(實際) 보존교량(보存橋梁)의 체계신뢰성(體系信賴性)을 해석(解析)하고 요소신뢰성(要藥信賴性)과의 차이(差異)를 비교(比數)하였으며, 아울러 체계목표신뢰성(體系目標信賴性) 개념에 기초(基礎)한 신뢰성규준(信賴性規準)의 검정방향(檢定方向)을 제시(提示)하였다.

• 전산구조공학
• /
• 제5권4호
• /
• pp.133-142
• /
• 1992

외측 보-기둥 접합부에 정착된 곧은 보 주철근의 인발거동을 예견하기 위한 해석모델이 개발되었다. 이 모델은 외측조인트에 수직방향으로 콘크리트를 구속하기 위하여 횡방향 철근을 배치한 상태의 구속조건(confined condition)하에서 이형철근의 부착특성에 관한 정착철근의 직경, 콘크리트 압축강도, 항복강도, 철근간격 및 주압력(column pressure)에 대한 영향을 고려할 수 있는 국부부착에 관한 시뮬레이션을 구체화하였다. 이 연구에서 채택된 해석 기법은 횡방향 철근이 배근된 공시체에 매입한 곧은 이형철근에 대한 인발실험의 결과를 만족하게 예견하였다. ACI-ASCE 352 위원회가 제안하고 있는 외측조인트 상태에서의 정착 철근길이에 관한 규정이 개발된 해석접근법을 사용해 평가 되었다. 이 해석 평가의 결과는 현재의 외측조인트의 구속조건에서의 정착길이에 대한 규정이 너무 안정적인 측면에 있다는 것을 암시하고 있다.

• Structural Engineering and Mechanics
• /
• 제41권2호
• /
• pp.157-181
• /
• 2012

The paper presents a review of the application of the newly proposed mixed finite element model for seismic simulation of different types of composite frame structures. To evaluate the performance of the element, a comparison with displacement-based and force-based models is conducted. The study revealed that the mixed model is superior to the others in terms of both speed of convergence and numerical stability, and is therefore considered the most practical approach for modeling of composite structures. In this model, the element is derived using independent force and displacement shape functions. The nonlinear response of the frame element is based on the section discretization into fibers with uniaxial material models. The interfacial behavior is modeled using an inelastic interface element. Numerical examples to clarify the advantages of the model are presented for the following structural applications: anchored reinforcing bar problems, composite steel-concrete girders with deformable shear connectors, beam on elastic foundation elements, R/C girders strengthened with FRP sheets, R/C beam-columns with bond-slip, and prestressed concrete girders. These studies confirmed that the model represents a major advancement over existing elements in simulating the inelastic behavior of composite structures.

• 대한기계학회논문집A
• /
• 제22권4호
• /
• pp.834-842
• /
• 1998

This paper examines the crack growth behavior of 7075-T651 and 5052-H32 aluminum alloy under high-low block loading condition. The cantilever beam type specimen with a chevron notch is used in this study. The crack growth and closure ae investigated by compliance method. The applied stress ratios are R=0.15, 0.0, -0.15 and R=-0.15, 0.0, 0.15. The crack growth rate was found to increase as the load amplitude increases. However,${\bigtriangleup}K_eff$ was almost independent on the stress ratio. The experimental constants of 7075-T651 and 5052-H32 in Paris law were c`=1-1.3${\times}{10^-7},m`=3~3.2 and c`=4~6{\times}{10^-9}, m`=4.3-4.8$, respectively. $K_op$ of 7075-T651 and 5052-H32 becomes smaller as the stress ratio decreases. It seems that the crack closure affects $K_op$.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.1521-1521
• /
• 2001

The objective of the research being presented was to construct and calibrate a spectrometer for the analysis of single kernels of corn. In light of the difficulties associated with capturing the spatial variability in composition of corn kernels by single-beam spectrometry, a hyperspectral imaging spectrometer was constructed with the intention that it would be used to analyze single kernels of corn for the prediction of moisture and oil content. The spectrometer operated in the range of 750- 1090 nanometers. After evaluating four methods of standardizing the output from the spectrometer, calibrations were made to predict whole-kernel moisture and oil content from the hyperspectral image data. A genetic algorithm was employed to reduce the number of wavelengths imaged and to optimize the calibrations. The final standard errors of prediction during cross-validation (SEPCV) were 1.22% and 1.25% for moisture and oil content, respectively. It was determined, by analysis of variance, that the accuracy and precision of single-kernel corn analysis by hyperspectral imaging is superior to the single kernel reference chemistry method (as tested).

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 가을 학술발표회 논문집
• /
• pp.609-614
• /
• 1997

Recently, many researchers have performed R&D about strengthening of R/C with steel plates, carbon fiber sheets. aramid fiber sheets and glass fiber sheets, and so on. However most of research were limited in study of flexural strengthening of R/C beams. This paper shows the results of an experimental study on shear reinforcement of deep beams using Glass Fiber Sheet in relation to shear-span ratio. strengthening orientation and anchorage. The results prove that shear failure is governed by reinforced orientation. adherence and anchorage. Additional anchorage of fibers does not only cause the improvement in the internal resistance, but also control the brittle shear failure of specimen after reaching the maximum load.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1998년도 제14회 학술발표회 논문개요집
• /
• pp.18-18
• /
• 1998

F First I will introduce our works how to improve the crystal growth t technique for Rare earth pnictides and chalcogenides. All these substances h have hi양1 vapor pressure and high melting print up to 3$\alpha$)()C. 까len we employ m the tungsten or molybden crucibles and enclose the sample by 빼e welding of m the lid with high current electron beam. We cannot elevate the temperature up t to 3$\alpha$)()C without suitable radiation shield because rate of radiation loss r rapidly increase in such a high temperature regions. There were no good r radiation shield but we discovered that the p-BN could work as an excellent r radiation shield after checking of the many substances. S Secondly I will show several interesting and unusual 뻐ysical properties of obtained crystals under high magnetic field, hi양1 pressure and also i including angle resolve photoemission spectroscopy. I will stress the p properties of the low carrier concentration with strong correlation on C댐, U USb and Yb4As3

• 한국구조물진단유지관리공학회 논문집
• /
• 제2권3호
• /
• pp.205-211
• /
• 1998

The purpose of this study is to evaluate shear strengthening effects of R/C beams with carbon fiber sheets. The major variables are shear reinforcement ratios, CFS strengthening ratios and strengthening methods of CFS. Following conclusions can be extracted. The shear capacity of beam strengthened with CFS is about 32~87% higher than that of beams without shear reinforcement. The strengthening effects of patch type is larger than those of strip type. The strain distribution in CFS intersected with shear crack is similar to that in stirrup and larger strain is observed in the middle of the shear span. It can be estimated that shear strength reduction factor ${\alpha}$=0.3 is appropriate for peeling effect of CFS.