• The Korean Journal of Pesticide Science
• /
• v.14 no.3
• /
• pp.191-198
• /
• 2010

To predict and design of new potent insecticidal compounds, the two dimensional quantitative structure-activity relationships (2D-QSARs) and molecular hologram quantitative structure-activity relationships (HQSARs) between the various physicochemical parameters as descripters of N'-phenyl-N-methylformamidine analogues (1-22) and their insecticidal activity against the two spotted spider mite (Tetranychus urticae) were discussed quantitatively. From 2D-QSAR models (1 & 3), the width ($B_2$) of $R_3$-group as sterically factor and optimal total dipole moment (TDM=2.025D) of $R_4$-group were mainly influenced to increase the activity. Therefore, the activities were depend upon the $R_3$- and $R_4$-groups. Particularly, it is predicted that the activity of newly designed potent compound (PI; $EC_{50}$=0.516 ppm) by 2D-QSAR models (3) and HQSAR model F2 was about 34.3 fold higher than that of the commercialized insecticide, Amitraz ($EC_{50}$=17.7 ppm).

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03a
• /
• pp.316-320
• /
• 2008

In this paper, the near wake of stationary and transversely oscillating square section cylinders with different corner radii are studied by numerical method to investigate the influence of corner radius. Six models R/D=0,0.1,0.2,0.3,0.4,0.5 (R is the corner radius and D is the characteristic dimension of the body) were studied. It was found that the corner radius of square cylinder significantly influences the flow features around the body both in stationary and oscillating conditions. Results indicate that, as R/D ratio increases, the Strouhal number increases and the separation point decrease for the stationary and oscillating cases.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.10a
• /
• pp.316-320
• /
• 2008

In this paper, the near wake of stationary and transversely oscillating square section cylinders with different corner radii are studied by numerical method to investigate the influence of corner radius. Six models R/D=0,0.1,0.2,0.3,0.4,0.5 (R is the corner radius and D is the characteristic dimension of the body) were studied. It was found that the corner radius of square cylinder significantly influences the flow features around the body both in stationary and oscillating conditions. Results indicate that, as R/D ratio increases, the Strouhal number increases and the separation point decrease for the stationary and oscillating cases.

• Progress in Superconductivity
• /
• v.5 no.2
• /
• pp.136-140
• /
• 2004

We fabricated and tested a resistive superconducting fault current limiters (SFCL) operated at 3.8 ㎸ based on YBCO thin films. The SFCL was composed of 7 components connected in series. Each component was designed to be capable of current limiting at 600 V, and has a SiC shunt resistor ( $R_{s}$) of 40 Ω in Parallel. Short circuit tests were carried out fur 0 and 90 degree faults lasting fur 5 cycles. The test results showed that the 7 components were quenched simultaneously under the safe quenches and evenly shared the applied voltage. The SFCL successfully suppressed the fault currents below 94 $A_{peak}$ within the quarter cycle after fault.t.t.

• Journal of Powder Materials
• /
• v.25 no.3
• /
• pp.246-250
• /
• 2018

In this study, we investigate the deformation behavior of $Hf_{44.5}Cu_{27}Ni_{13.5}Nb_5Al_{10}$ metallic glass powder under repeated compressive strain during mechanical milling. High-density (11.0 g/cc) Hf-based metallic glass powders are prepared using a gas atomization process. The relationship between the mechanical alloying time and microstructural change under phase transformation is evaluated for crystallization of the amorphous phase. Planetary mechanical milling is performed for 0, 40, or 90 h at 100 rpm. The amorphous structure of the Hf-based metallic glass powders during mechanical milling is analyzed using differential scanning calorimetry (DSC) and X-ray diffraction (XRD). Microstructural analysis of the Hf-based metallic glass powder deformed using mechanical milling reveals a layered structure with vein patterns at the fracture surface, which is observed in the fracture of bulk metallic glasses. We also study the crystallization behavior and the phase and microstructure transformations under isothermal heat treatment of the Hf-based metallic glass.

• The Journal of Engineering Geology
• /
• v.3 no.1
• /
• pp.21-37
• /
• 1993

In order to investigate the correlation of sedimentary rock properties. specific gravity, porosity, water content, sonic wave velodty, and point4oad strength index of core samples of limestones, sandstones and shales were measured. The relationships between density and velocity show $V_p=16300d-38719.3,{\;}V_s1896.4d-29225.1$ of regression equation for sandstones and $Vp=4085d-10264.8,{\;}V_s=3519d-7841.3$ for shales and <$Vp=4085d^2-20747d+303,{\;}V_s=3899d^2-21442d+318$ for limestones. Seismic wave velocity of shales which have high density is lower than that of sandstones, and this seems to be an effect of bedding in shale. P-wave velocity and S-wave velocity of limestones, sandstones and shales show the linear relationships as a whole. The regression equations are respectively calculated V_s=0.26V_p+1041.6m/sec,{\;}V_s=0.43V_p+424.2m/sec,{\;}and{\;}Vs=0.51V_p+261.9m/sec$ and the correlation coefficients of the velocity show r= 0.86 in sandstones, r= 0.75 in limestones and r=0.86 in shales. According to the point4oad strength test for limestones, point4ord strength anisotropy was not so dear even though the specimens show generally the banded structure. Variations of dip angle of bedding whihin the range $30^{\circ}-60^{\circ}$ does not have much influence upon the diametral strength index and axial strength index. From the result of point load test, P-wave velocity increases with point4ord strength index but the regression equations are $V_p=98.5lI{s_d}+4082.1m/sec,{\;}V_p=106.41{s_a}+3954m/sec$ and their correlation coefficient is low.

• Microbiology and Biotechnology Letters
• /
• v.34 no.1
• /
• pp.52-57
• /
• 2006

For the purpose of production of a novel antihyperlipemial HMG-CoA reductase inhibitor from bacteria, a bacterium which showed the highest HMG-CoA reductase inhibitory activity was isolated from traditional Doenjang. This strain was identified as Bacillus cereus (D-3) based on its microbiological characteristics and 165 rRNA sequence analysis. The maximal HMG-CoA reductase inhibitor production from Bacillus cereus D-3 was obtained by cultivation in a Glucose-CSL broth containing 2% glucose, 0.6% corn steep liquor, $0.04%\;K_{2}HPO_4$ and $0.05%\;KH_{2}PO_4$ at $30^{\circ}C$ for 36 h. The final HMG-CoA reductase inhibitory activity under the above conditions was 39.4%.

• Transactions on Electrical and Electronic Materials
• /
• v.18 no.6
• /
• pp.334-337
• /
• 2017

In this paper, to develop the ceramics with high $d_{33}$ and high $Q_m$ for ultrasonic transducer applications, $0.10Pb(Ni_{1/3}Nb_{2/3})O_3-0.07Pb(Mn_{1/3}Nb_{2/3})O_3-0.83Pb(Zr_{0.5}Ti_{0.5})_{0.83}O_3$ (PNN-PMN-PZT) ceramics were sintered at $940^{\circ}C$ using $CuO-Li_2CO_3-Bi_2O_3$ (CLBO) as a sintering aid by a traditional solid-state technique. The influence of zinc oxide additive on the physical properties of the prepared ceramics were systematically investigated. The R-T (rhombohedral-tetragonal) phase coexistence was found in the ceramics without zinc oxide additive and with increasing amounts of ZnO additive, the specimens showed a tetragonal phase. The formation of a liquid phase between ZnO and $Bi_2O_3$ contributed significantly to the grain growth of specimens. For the 0.1 wt% ZnO ceramics, the optimal physical properties of $d_{33}=370pC/N$, ${\varepsilon}_r=1,344$, $k_p=0.621$, and $Q_m=1,523$ were obtained.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.10
• /
• pp.1514-1518
• /
• 2006

English crossbred steers (n = 32) and heifers (n = 32) were fed a corn-based finishing diet and supplemented with 2% Ascophyllum nodosum on a DM basis to for various feeding stages of the 119 d feeding period determine the supplementation strategy that maximized intramuscular fat deposition as determined by quality grade. All cattle were implanted with Ralgro$^{(R)}$ on d 36 of the trial and re-implanted with Revalor-S$^{(R)}$ or Revalor-H$^{(R)}$ on d 92. Cattle were blocked by sex and divided into one control and three treatment groups receiving Ascophyllum nodosum. Treatment 1 (trt 1) received Ascophyllum nodosum from d 36 to 50 of the feeding period, trt 2 received Ascophyllum nodosum for the last 14 d of the feeding period, and trt 3 which received Ascophyllum nodosum for both d 36-50 and the last 14 d of the feeding period. Cattle were weighted initially ($385{\pm}4.53kg$) and every 28 d following until they reach an average BW of $554{\pm}7.46kg$. No effect for Ascophyllum nodosum supplementation was found on measured performance characteristics. All treatment groups supplemented with Ascophyllum nodosum had higher actual marbling scores (p<0.05) than controls. Trt 1 was found to have a highest marbling score (572.5; p<0.05), whereas the control group having the lowest marbling score (473.8). Trt 1 had a higher quality grade (5.25; p<0.05) than the control (3.94) group, but did not differ from trt 2 (4.56; p = 0.105) and trt 3 (4.75; p = 0.236) where high Select = 4, and low Choice = 5. Trt 2 did not differ from trt 3 (p = 0.655), or the control group (p = 0.140) for quality grade. However, trt 3 did tend to differ (p = 0.057) from the control group for quality grade. Control group animals graded 25% Choice, 62.5% Select; trt 1 graded 75% Choice, 18.8% Select; trt 2 graded 62.5% Choice, 25% Select and trt 3 graded 56.3% Choice and 31.2% Select. Overall, treatment groups had a 39.6% increase in Choice quality grade and a 37.5% decrease in Select quality grade when compared to the control animals.

• Journal of Animal Science and Technology
• /
• v.52 no.6
• /
• pp.475-480
• /
• 2010

The bovine fatty acid binding protein 4 (FABP4) plays an important role to uptake intracellular fatty acid. It has been previously reported as a positional candidate gene for marbling score in livestock. The re-sequencing of FABP4 gene detected a polymorphic AT repeated sequence in intron II of FABP4 gene. Allelic distribution for this microsatellite marker was examined in other cattle breeds. A total of 8 alleles were detected with diverse repeat units (14 to 21 AT repeat) in Hanwoo and 7 breeds. Of the 8 alleles, the predominant alleles were $[AT]_{16}$, $[AT]_{18}$ and $[AT]_{19}$ in the Hanwoo and 7 cattle breeds. The linear mixed model for genotypic effect (3237AT) on carcass traits showed a significant effect on marbling score (MAR P=0.025) and live weight (LWT; P=0.04) in the 583 Hanwoo cattle population. Live weight (LW) was highest in the homozygous $(AT)_{17}$ genotype ($557.5{\pm}6.94$) and lowest in the heterozygous $(AT)_{16/17}$ genotype ($521.7{\pm}7.70$). On the other hand, the homozygous $(AT)_{17}$ genotype ($3.0{\pm}0.15$) has the highest effect on marbling score and the lowest effect was in homozygous (AT)$_{18}$ genotype ($2.2{\pm}0.15$). The marbling score difference between both groups was 0.8 which is around two times higher than SNP genotype effect on marbling score in Limousin $\times$ Wagyu crosses.