• Journal of Technology Innovation
• /
• v.22 no.3
• /
• pp.1-35
• /
• 2014

This study analyzed convergence status among input technologies used in technology development with Technology I-O analysis. It was another version of industry input-output analysis which is used in technology planning. This case is an analysis of association between technology an product. The subjects of analysis were 401 tasks that applied to '2012 Convergence Technology Development Project for Small and Medium Businesses' promoted by Korea Technology & Information Promotion Agency for Small and Medium Enterprises. The process of analysis is as followed. First step, we made a matrix table as an input of technology input-output analysis. Input was defined by technology and output was defined by the product. Input technology was defined in a 3-digit code under National Science Technology Classification and output products were defined in a 5-digit under National Standard Industry Code. Second, the Spillover ratio among technologies were calculated and was used to make a picture of technology linkage. As a result of analysis, technology spillover of embedded S/W was the highest in IT convergence, mold product in ET convergence, and functional cosmetics development technology in BT convergence. In general, IT convergence had many element technologies with high technology spillover, and ET had a small number of element technologies with high technology spillover. Therefore, investment effect of element technology is expected to be large if investment on element technologies with high technology spillover is important for vitalizing convergence.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.19 no.4
• /
• pp.313-319
• /
• 2007

Long term wave climate of both extreme and operational wave height is essential for planning and designing coastal structures. Since the availability of the field wave data for the waters around Korean peninsula is limited to provide a reliable wave statistics, the wave climate information has been generated by means of long-term wave hindcasting using available meteorological data. In this paper, a set of deep water wave data obtained from KORDI(2003) were analyzed for extreme wave heights. These wave data at 67 stations off the Korean coast from 1979 to 1998 were arranged in the 16 directions. The probability distributions considered in this research were the FT-I and Weibull distribution. For each of these distributions, the method proposed by Goda(2004) was applied to estimate the parameters. For judgment of best fitting, MIR criterion proposed by Goda and Gobune(1990) was used. FT-I distribution which best fits to the 886 data, while Weibull(k=0.75) 81 data, Weibull(k=1.00) 105 data.

• Journal of Information Management
• /
• v.37 no.2
• /
• pp.1-20
• /
• 2006

It has lately been recognized that the sharing and exchanging of the research results information is the critical factor to improve the research productivity. So many institutions are planning or developing the information systems which provide the research information services for researcher. But it has very difficulty in integrating the research resources information due to the dispersion and heterogeneity in data sources, and semantic and structural difference in describing data. We propose the semantic web based methodology and conceptual framework for raising the interoperability of metadata about research results information, which will support the integration of the distributed research data for information services in the end. We first introduce the ontology which is developed based on Standard Metadata of Research Results Information published by STISC. Then to show the applicability in real-world environment, we express the metadata of research information in RDF/RDFS according to ontology. Finally we proposed the conceptual architecture of research information service system which shows the main components, the functional requirements, and the principal and design direction at implementing the system.

• Journal of Energy Engineering
• /
• v.29 no.1
• /
• pp.13-24
• /
• 2020

Many countries are actively engaging in the reduction of greenhouse gas emissions, and as part of this effort, gradually reducing the portion of coal power generation and instead increasing the portion of power generations from renewable energy sources and natural gas. Korea is taking a similar policy to expand LNG power generation for the next decade. There is a concern, though, about the policy not being aligned with the domestic industry development, since only a few products are being made in Korea along the LNG power generation industry value chain. Therefore in this paper, we first looked at the current status of the gas turbine and high temperature parts industry used for LNG power generation in Korea, and then looked into the industrial issues and challenges through the analysis of supply chains of the domestic gas turbine industry. Finally, we tried to propose strategies to revitalize and localize the domestic gas turbine and high temperature parts industry. The proposed strategies can be summarized as 1) creation of domestic gas turbine manufacturing ecosystem via construction of gas turbine alliance, 2) strategic R&D support for localization of gas turbine and high temperature parts, and 3) provision of domestic testbeds for technology evaluation and commercialization.

• Journal of Korean Society for Geospatial Information Science
• /
• v.9 no.2 s.18
• /
• pp.29-36
• /
• 2001

The purpose of this paper is to describe the Disaster Management System Development of Enterprise GIS at the Kangwon Province in Korea. This project is included into 'the Kangwon Enterprise GIS 21 plan'. The Division of Disaster Management is in the middle of the 2-year project of the Disaster Management System development, appropriate for business performed at the Departments of Forestry, Culture, Environment, Tourism, etc. At the 1st phase of CIS implementation, for more than half a year we focused on the necessity of management of disasters. In the planning process, we needed long-term information on the whole area of Kangwon. In the assessment and response processes, we needed real-time data from Korean Meteorological Administration and other agencies. All the above information was carefully studied and referred to. ESRI's new GIS technologies solve the natural hazard/disaster problems. For example, hazardous materials routing often needs to be found the least expensive path through a roadway network. In the circumstances given, we can choose the departure point and destination of the vehicle, which carries the materials. It's also possible to minimize overall risk and costs of disaster problems by making a plan of people and possessions evacuation from the disaster area in short time limits. We can meet all the above goals using the latest ESRI's technologies.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.44 no.3
• /
• pp.64-69
• /
• 2007

Motion control of the system is a position control of motor. Motion control of an uncertain robot system is considered as one of the most important and fundamental research directions in the robotics. Some distinguished works using linear control, adaptive control, robust control strategies based on computed torque methodology have been reported. However, it is generally recognized within the control community that these strategies suffer from the following problems : the exact robot dynamics are needed and hard to implement, the adaptive control cannot guarantee the performance during the transient period for adaptation under the variation, the robust control algorithms such as the sliding mode control need information on the bounds of the possible uncertainty and disturbance. And it produces a large control input as well. In this dissertation, a motion control for the unmanned intelligent robot system using disturbance observer is studied. This system is affected with an impact vibration disturbance. This paper describes a stable motion control of the system with the consideration of external disturbance. To obtain the stable motion independently against the external disturbance, the disturbance rejection is strongly required. To address the above issue, this paper presents a Disturbance OBserver(DOB) control algorithm. The validity of the suggested DOB robust control scheme is confirmed by several computer simulation results. And the experiments with a motor system is performed to give the validity of applicability in the industrial field. This results make the easier implementation of the controller possible in the field.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.24 no.6
• /
• pp.651-656
• /
• 2014

Corrosion has a significant influence upon the reliability assessment and the maintenance planning of gas pipeline. Corrosion defects occurred on the underground pipeline can be obtained by conducting periodic in-line inspection (ILI). However, little study has been done for practical use of ILI data. This paper deals with remaining lifetime prediction of the gas pipeline in the presence of corrosion defects. Because a pipeline parameter includes uncertainty in its operation, a probabilistic approach is adopted in this paper. A pipeline fails when its operating pressure is larger than the pipe failure pressure. In order to estimate the failure probability, this paper uses First Order Reliability Method (FORM) which is popular in the field of structural engineering. A well-known Battelle code is chosen as the computational model for the pipe failure pressure. This paper develops a Matlab GUI for illustrating failure probability predictions Our result indicates that clustering of corrosion defects is helpful for improving a prediction accuracy and preventing an unnecessary maintenance.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2003.11a
• /
• pp.577-588
• /
• 2003

정보기술의 급진적인 발달로 경쟁이 점점 심화되어져 가고 있는 환경 속에서 경쟁적 우위를 갖기 위한 기업들의 끊임없는 노력은 계속 되고 있다 이러한 시점에 ERP(Enterprise Resource Planning: 전사적 자원관리) 시스템은 기업의 경쟁력을 재고하고 변화하는 비즈니스 환경을 예측하여 신속하고 현명하게 대처하기 위한 수단으로서의 역할을 수행하고 있으며 최근 기업뿐만 아니라 대학에서도 이에 대한 관심이 확산되고 있다. 이미 국외의 많은 대학들이 ERP 시스템을 도입한 실정이고, 국내에서는 정보화 사업의 일환으로 연세대학교가 일반 행정 업무의 효율화를 위해 SAP R/3를 도입했고 향후 학사 행정 시스템과의 통합을 모색 중이다. 정부에서도 국·공립 대학들의 행정업무효율성 제고를 위해 차세대 행정업무시스템으로 ERP 시스템 도입을 본격화하고 있다. 따라서 본 논문에서는 정보화를 추진하고자 하는 국내 대학에 ERP 시스템의 도입을 제안하였고, 기존에 선행 연구된 연구자료를 비교·분석하여 기업의 ERP 시스템 구축 성공요인을 정리하였다. 국내 대학은 ERP 시스템 도입 시 제시된 주요성공요인 등을 고려하고 지속적인 관심으로 프로젝트를 수행함으로써 보다 효과적으로 구축을 완료해야 할 것이며, 아직 국내의 사례가 충분하지 않기 때문에 본 논문에서 제시한 국내외의 사례를 살펴봄으로써 대학의 ERP 시스템 도입에 관해 빠른 이해를 할 수 있을 것이다. 끝으로 본 논문은 초기단계에 있는 국내 대학의 ERP 시스템 도입에 대학이 나가야 할 방향을 제시하였고, 앞으로 국내 대학의 ERP 시스템 도입이 증가할수록 이에 대한 연구도 계속 되어야 할 것이다.보다 더 높게 나타난 반면에, 실무계 전문가 집단은 비용이 정보시스템 보다 더 높게 나타났다는 것이다.리적 특성이론과 사용자 수용이론으로 구분하여 이 특성에 따라서 향후 개발될 3D 핸드폰 아바타의 수용도의 관계를 파악하고자 한다. 본 연구에 대한 자료 수집방법은 D대학교의 교양과목인 “사이버문화의 이해와 활용”을 수강하는 학생들을 대상으로 총 170부를 설문 조사하였으며, 수집된 설문지 중에서 불성실하게 응답한 설문지 6부를 제외한 총 164부를 유효한 설문으로 확보하였다. SPSSWIN 10.0 패키지를 이용하였으며, Cronbach's Alpha값을 통한 신뢰도 분석과 요인분석을 통한 타당성 분석을 하고, 연구변수로 선정한 각 요소들의 아바타 수용도에 미치는 영향력 정도를 파악하기 위해 회귀분석을 실시하였다. 그 결과 심리적 특성과 사용자 수용 특성은 아바타 수용도에 부분적으로 영향을 미친다는 것 결과가 나타났다.웨어 프로세스 평가와 개선 모델의 개발을 위한 기초적인 자료를 제공할 것으로 예상된다 또한, 본 연구 결과는, 우리나라 소프트웨어 조직들이 실제로 무엇을 필요로 하는지를 밝힘으로써, 우리나라의 소프트웨어 산업을 육성하기 위한 실효성 있는 정책 입안을 위한 기초 자료를 제공할 것으로 예상된다.다.를 검증하려고 한다. 협력체계 확립, ${\circled}3$ 전문인력 확보 및 인력구성 조정, 그리고 ${\circled}4$ 방문보건사업의 강화 등이다., 대사(代謝)와 관계(關係)있음을 시사(示唆)해 주고 있다.ble nutrient (TDN) was highest in booting stage (59.7%);

• Korean Journal of Construction Engineering and Management
• /
• v.14 no.3
• /
• pp.107-114
• /
• 2013

The interest in traditional Korean housing has greatly increasing in Korean housing market. However, it is difficult to wildly disseminate for a high construction cost reason. In order to effectively facilitate the Hanok construction, Korean government has initiated a project that develops a new style Korean housing, which meets the requirements of low cost and modernized life style. Cost of building is mainly affected by materials and construction methods. Hanok has some special commodities those significantly impact the cost. In order to effectively cut down the costs, well-organized planning for costs is very important. Also, improving the productivity by utilizing new materials and methods can result in cost down. In this context, this paper compared and analyzed two different types of Korean housing; one is a modernized Korean house which used new materials and methods, the other is a traditional Korean house which was build up by purely traditional methods. Productivity has also been compared and analyzed for 5 major commodities between two types of models. Based on these comparative data, effect of cost down by new model has been analyzed. As a result it is confirmed that by using the new materials and methods could highly effect to increasing productivity and cost down. Especially, the cost of Roofing have been more influenced by using new material while the Wood and Finishes have been influenced by new construction method. Construction cost of Foundation (Earthwork, Concrete, Masonry) and Openings were influenced both factors, changing of materials and methods.

• The Journal of Engineering Geology
• /
• v.24 no.1
• /
• pp.39-52
• /
• 2014

Limestone caves that consist of main passages and branches are formed by a variety of processes, and have the characteristic of developing with a preferred orientation controlled by discontinuities such as bedding, joints, and faults around the cave. However, it is difficult to analyze a representative orientation from various orientations. To interpret the overall development orientation of limestone caves, this study proposes new development orientation analysis methods, termed the Average Span Ratio Method (ASRM) and the Individual Development Ratio Method (IDRM), using the weighting of persistence. Nine limestone caves in Korea were randomly selected for testing the new methods. The methods show a stronger development orientation for limestone caves than that obtained by traditional methods, which consider only the distribution of development orientations. Based on an analysis of the relationship between the average span and the dip angle of bedding, it is confirmed that shallowly dipping bedding is a major contributor to the expansion of span in limestone caves. In addition, using scan-line survey data acquired in the field, we perform an RMR analysis of stability of the ground around limestone caves.