• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.11
• /
• pp.226-232
• /
• 2020

The Stage-Gate is a market-oriented model that aims to launch new products on the market. Therefore, it can be appropriately introduced and applied to the operation and management of NSSCP, which is undergoing demonstration projects for Daegu and Siheung. In addition, smart cities have the characteristics of convergence and complex among various innovative technologies. When the Stage-Gate is introduced, the performance can be managed centering on the outcomes for each research institution. Therefore, the NSSCP is applying the Stage-Gate for the first time among national R&D projects to improve the quality of the research results and to demonstrate and commercialize them successfully. This paper reviews the operation results of the 1st and 2nd years when the State-Gate was introduced and analyzes the opinions of an R&D management agency, research institutes, and gate reviewers to present the supplementary and improvements for applying to the evaluation process for the next year. When operating the Stage-Gate by optimizing the situation for each project and being wary of inefficiencies caused by the rigid operation, it is expected that flexible evaluation for each outcome will be possible according to the convergence characteristics of smart cities.

• Tunnel and Underground Space
• /
• v.34 no.1
• /
• pp.15-27
• /
• 2024

In this case study, detailed survey of the Excavation Damaged Zone (EDZ) evaluation for the deep geological repository for high level nuclear waste was conducted. Oversea and Domestic case studies were compiled and investigated. EDZ is considered a crucial factor in the performance assessment of spent fuel disposal, leading to numerous studies worldwide aiming to understand the characteristics of the EDZ and quantitatively assessment of its extent through field and laboratory tests at Underground Research Laboratory (URL) sites. To enhance the understanding of EDZ, this study begins with defining and exploring the history of EDZ, compiling factors influencing EDZ, and summarizing the impacts caused by EDZ. Subsequently, an analysis of EDZ and rock properties is performed, followed by presenting generalized outcomes, limitations drawn from previous research, and proposing future research directions.

• Information Systems Review
• /
• v.19 no.4
• /
• pp.1-25
• /
• 2017

Despite high uncertainty on financial return, firms have continuously increased their investment on technologies because they recognize the potential value of technology investment in terms of enhancing operational efficiency and sustaining competitive advantage. Notably, an individual technology investment pattern or strategy within an industry may ultimately lead to significant differences in business performance. Hence, we first categorized technology investment into traditional research and development investment and information technology investment. Afterward, we examined the effects of each pattern with combination of the two types of technology investment on business performance according to firm size and position in the supply chain through fuzzy-set qualitative comparative analysis. Data collected from 562 manufacturing firms in Korea were used in the analysis. Results showed that large-sized firms were slightly affected with microscopic patterns in their technology investments, whereas small firms were highly affected with their technology investment patterns and their positions in the supply chain. The findings implied that a small enterprise requires an appropriate technology investment strategy to achieve successful business outcomes.

• Korean Journal of Psychosomatic Medicine
• /
• v.21 no.1
• /
• pp.18-26
• /
• 2013

Objectives : Type D personality was originally introduced to study the role of personality in predicting outcomes of heart disease. However, researches showed that other medical conditions are also affected by this personality. The purpose of this study was to evaluate the relationship between type D personality and somatic symptom complaints in depressive patients. Methods : Eighty-two individuals diagnosed with depressive disorder were included. Type D personality was measured with DS14. Patient Health Questionnaire(PHQ) 9 and 15 were used to measure depression severity and somatization tendencies. For alexithymia, TAS-20 was used. Student T-test and linear regression analysis were performed. The best regression model was determined by stepwise variable selection. Results : More than half of the subjects(56%) complained at least medium degree somatic symptoms according to PHQ-15 criteria. Two-thirds of the subjects were classified as Type D personality(63.4%). The mean PHQ-15 score of the Type D individuals was significantly higher than the remaining subjects(PHQ-15 mean=12.7, $p=8.2{\times}10^{-7}$). The best regression model included age, PHQ-9 score and NA subscale score as predictor variables. Among these, only the coefficients of age($p=1.5{\times}10^{-3}$) and NA score($p=1.5{\times}10^{-7}$) were found to be statistically significant. Conclusions : The result showed that Type D personality was one of the strong predictors of somatic complaints among depressive individuals. The finding that negative affectivity rather than social inhibition was more closely associated with somatization tendencies does not fully agree with the traditional explanation that inability to express negative emotion predispose the individuals to somatic symptoms. The finding that alexithymia was not shown to be a significant predictors also substantiated this discrepancy. However, it might be possible that the high correlation between NA and SI subscore(r=0.65) and between NA and TAS-20 score(r=0.44) hid the additional effects of social inhibition and alexithymia. Further research with a larger sample would be needed to investigate the effects of the latter two components over and above the effect of negative affectivity on the somatic complaints in depressive patients.

• Archives of Plastic Surgery
• /
• v.44 no.1
• /
• pp.26-33
• /
• 2017

Background The purpose of this study was to assess the correlation between the 2-dimensional (2D) extent of orbital defects and the 3-dimensional (3D) volume of herniated orbital content in patients with an orbital wall fracture. Methods This retrospective study was based on the medical records and radiologic data of 60 patients from January 2014 to June 2016 for a unilateral isolated orbital wall fracture. They were classified into 2 groups depending on whether the fracture involved the inferior wall (group I, n=30) or the medial wall (group M, n=30). The 2D area of the orbital defect was calculated using the conventional formula. The 2D extent of the orbital defect and the 3D volume of herniated orbital content were measured with 3D image processing software. Statistical analysis was performed to evaluate the correlations between the 2D and 3D parameters. Results Varying degrees of positive correlation were found between the 2D extent of the orbital defects and the 3D herniated orbital volume in both groups (Pearson correlation coefficient, 0.568-0.788; $R^2=32.2%-62.1%$). Conclusions Both the calculated and measured 2D extent of the orbital defects showed a positive correlation with the 3D herniated orbital volume in orbital wall fractures. However, a relatively large volume of herniation (>$0.9cm^3$) occurred not infrequently despite the presence of a small orbital defect (<$1.9cm^2$). Therefore, estimating the 3D volume of the herniated content in addition to the 2D orbital defect would be helpful for determining whether surgery is indicated and ensuring adequate surgical outcomes.

• Journal of Environmental Health Sciences
• /
• v.36 no.6
• /
• pp.441-455
• /
• 2010

Researchers who work in science and engineering R&D laboratories are commonly exposed to a wide range of chemical, biological and physical hazards. They also may adopt ergonomically poor postures for long periods of time. These factors may increase the risk of adverse health outcomes in laboratory workers. Recently, there were several fatal accidents in the laboratories in universities and research institutes in Korea. Consequently, the 'Laboratory Safety Act' was enacted in 2006. However, there are concerns about the health risk associated with chronic exposures to hazards, as the management measures provided in this Act are very limited, focusing primarily on accident prevention and compensation for lab work-related accidents. In this article, the methods for assessing exposure to chemicals in laboratory environments are discussed. Also, epidemiological studies examining the association between laboratory exposure and health effects, including cancer and reproductive toxicity are extensively reviewed. Finally, the possible roles of environmental health professionals in this area are suggested, along with a list of critical research needs for properly assessing laboratory workers' exposure and risk.

• Asian Journal of Innovation and Policy
• /
• v.6 no.3
• /
• pp.313-331
• /
• 2017

This paper exhibits the concept of Triple Helix model to explain and link university-industry-government (Triple Helix) connections to national innovation systems theory. The driver of this paper is to test the dynamics of Triple Helix concept under national innovation system in the Association of South East Asian Countries (ASEAN)-5 economies. Panel econometric analysis with cross-sectional dependence (CD) test is applied to investigate the relationship amongst Triple Helix variables. The empirical analysis employs innovation indicators of five founding ASEAN countries namely Malaysia, Indonesia, Singapore, the Philippines and Thailand for the period of 2000-2015 from an existing WDI and WCY database. Econometric results support the two research questions of this study; firstly, there is a significant relationship between innovation outcome and its key drivers under Triple Helix context of National Innovation System in ASEAN-5 economies; secondly, the extent of the relationship among government R&D expenditure with high-tech productions are positive and significant while new ideas coming from universities as scientific publications and high-tech production have positive relationship but not significant yet in ASEAN-5 countries. Overall labor productivity is positive and significant with innovation outcomes in ASEAN-5.

• Advances in materials Research
• /
• v.9 no.3
• /
• pp.203-218
• /
• 2020

This research paper presents the outcomes in terms of mechanical and microstructural characteristics of binary and ternary concrete when exposed to elevated temperature. Three parameter were taken into account, (a) elevated temperature (i.e., 200, 400, 600 and 800℃) (b) binary concrete with cementitious material sugarcane bagasse ash (SCBA) and ground granulated blast furnace slag (GGBFS) replacement percentage (i.e., 0, 15, 20, 25 and 30%) and (c) ternary concrete with cementitious material SCBA and GGBFS replacement percentage (i.e., 0, 15, 20, 25 and 30%). A total of 285 standard cube specimens (150 mm × 150 mm × 150 mm) containing Ordinary Portland Cement (OPC), SCBA, and GGBFS were made. These specimens then exposed to several elevated temperatures for 2 h, afterword is allowed to cool at room temperature. The following basic physical, mechanical, and microstructural characteristics were then determined and discussed. (a) mass loss ratio, (b) ultrasonic pulse velocity (UPV) (c) physical behavior, (d) compressive strength, and (e) field emission scanning electron microscope (FESEM). It was found that compressive strength increases up to 400℃; beyond this temperature, it decreases. UPV value and massloss decrease with increase in temperature as well as the change in color and crack were observed at a higher temperature.

• International Journal of Contents
• /
• v.16 no.3
• /
• pp.33-44
• /
• 2020

Small and medium enterprises need a wide range of information regarding technologies, industries, market conditions, other companies, and products to facilitate identification of new growth opportunities and to respond quickly to changes in the business environment. Collecting such information, however, requires the input of resources (human resources, cost, and time), and the lack of marketability resulting from the shortage of such resources is often cited as the reason small and medium often fail in their effort to commercialize their technology. The purpose of this study was to analyze the environmental factors such as market concentration and the current level of competition to enable companies to make the necessary decisions when considering market entry following R&D planning and technology commercialization, or after the development of a new product. Also, an expert-based 5FORCE analysis can be performed using the KMAPS, an industry and market intelligence system: this facilitates automatic production of analyses based on the corporate finance and transaction data. The key contribution of the study is that it facilitates conveniently and quickly analyzing the 5 Forces, which had been a difficult task in the environmental analysis, and that the outcomes of this study empower companies in the decision-making process.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.9
• /
• pp.1975-1984
• /
• 1997

In this paper, we analyzed the frequency characteristics and the crosstalk of the adjacent parallel lines and the crossed lines in high-speed packaging interconnections by using the three-dimensional finite difference time domain (3D FDTD) method. To analyze the actual crosstalk phenomena in the transmission of the high-speed digital sgnal, the step pulse with fast rise time was used for the source excitation signal instead of using the Gaussian pulse that is generally used in FDTD. To veify the theoretical resutls, the experimental interconnection lines that were fabricated on the Duroid substrate($\varepsilon_{r}$=2.33, h=0.787 [mm]) were tested by TDR(time domain reflectometry). The results show good agreement between the analyzed results and the tested outcomes.