• 한국지진공학회논문집
• /
• 제20권4호
• /
• pp.223-234
• /
• 2016

To investigate earthquake responses of structures with basements affected by soil deposits, centrifuge tests were performed using an in-flight earthquake simulator. The test specimen was composed of a single-degree-of-freedom structure model, a basement and sub-soil deposits in a centrifuge container. The test parameters were the dynamic period of the structure model, boundary conditions of the basement, existence of soil deposits, centrifugal acceleration level, and type and level of input earthquake accelerations. When soil deposits did not exist, the earthquake responses of the structures with fixed basement were significantly greater than those of the structure without basement. Also, the earthquake responses of the structures with the fixed basement surrounded by soil deposits were amplified, but the amplifications were smaller than those of the structures without basement. The earthquake responses of the structures with the half-embedded basement in the soil deposits were greater than those estimated by the fixed base model using the measured free-field ground motion. The test showed that the basement and the soil deposit should be simultaneously considered in the numerical analysis model, and the stiffness of the half-embedded was not effective.

• 한국전자파학회논문지
• /
• 제20권10호
• /
• pp.1107-1113
• /
• 2009

본 논문에서는 K-Band에서 동작하는 1/2 주파수 분배기를 130 nm CMOS 공정을 이용하여 설계하고 제작한 결과를 보인다. 피드백 방식의 밀러 주파수 분배기는 20~25 GHz에서 동작하며 바이어스 전압 1.2 V에서 7.2 mW의 전력을 소모하고 코어 회로의 레이아웃 크기는 $315{\times}246\;um^2$이다. 밀러 주파수 분배기의 출력 신호를 2분 주시키기 위한 CML(Current Mode Logic) 주파수 분배기는 8.5~13 GHz에서 동작하며 5.7 mW의 전력을 소모하고, 코어 회로의 레이아웃 크기는 $91{\times}98\;um^2$이다. 또한 두 주파수 분배기를 결합하여 20~25 GHz의 입력 신호가 4분주되어 출력됨을 확인하였다.

• 한국수소및신에너지학회논문집
• /
• 제21권6호
• /
• pp.595-603
• /
• 2010

This paper deals with an economic evaluation of domestic window type photoelectrochemical hydrogen production utilizing solar cells. We make some sensitivity analysis of hydrogen production prices by changing the values of input factors such as the initial capital cost, the solar to hydrogen conversion efficiency, and the system duration time. The hydrogen production price of the window type photoelectrochemical system was estimated as 1,168,972 won/$kgH_2$. It is expected that hydrogen production cost can be reduced to 47,601 won/$kgH_2$ if the solar to hydrogen conversion efficiency is increased to 14%, the system duration time is increased to 20,000 hours, and the initial capital cost is decreased to 25% of the current level. We also evaluate the hydrogen production cost of the water electrolysis using the electricity produced by solar cells. The corresponding hydrogen production cost was estimated as 37,838 won/$kgH_2$. The photoelectrochemical hydrogen production is evaluated as uneconomical at this time, and we need to enhance the solar to hydrogen conversion efficiency and the system duration time as well as to reduce prices of the system facilities.

• Journal of Biosystems Engineering
• /
• 제34권5호
• /
• pp.315-324
• /
• 2009

Various types of vibration are transmitted to operators of agricultural tractors while working in the field. Most harmful vibration to human body is ride vibrations with low frequency ranging from 1 to 10 Hz, caused by rough terrain. These ride vibration has vertical and rotational components. This study was conducted to develop an active seat suspension system with two degrees of freedoms, enabling effectively reduce vibrations in vertical and pitch motions. Therefore, a mechanism for the active seat suspension was developed, and an electro-hydraulic servo system and a controller to drive the active seat suspension system were also developed in this study. A simulation model was developed to evaluate how the active seat suspension system effectively reduce the vibrations transmitted to the base of seat. Active seat suspension was optimized to enhance the performance using the developed simulation model. The performance of the seat suspension system was evaluated according to the test codes described in EEC78/764 in order to investigate the feasibility of application to agricultural tractors. The result showed that the developed active seat suspension system could reduce the magnitude of vertical vibration up to 80% for the input vibrations according to the test codes described in EEC78/764. The system could reduce the rotational displacement of ${\pm}\;2.5$ degrees up to 50% for the pitch vibration on the average in the frequency range of 1 to 2 Hz.

• 대한토목학회논문집
• /
• 제12권1호
• /
• pp.207-217
• /
• 1992

본 연구에서는 기체 액체 고체의 직접접촉이 일어나는 3상 유동층 반응기를 이용하여 유입상승 유속에 의한 공극률의 변화와 생물막의 두께 및 밀도를 관측하였다. COD의 용적부하율은 반송비(r=0.2, 0.4, 0.6)로 조절하여 $201.12-1150.8g/m^3{\cdot}d$로 하였으며, 고체 매질로는 연탄재입자(평균유효입경 : 1.34 mm)와 유리비드(3 mm)를 사용하여, 매질의 차이에 따른 반응기의 효율에 대하여 비교하였다. 그 결과 반송비를 일정하게 고정시킨 경우, 연탄재 매질에 의한 생물막의 두께가 유리비드를 사용한 것보다 약 4.8배 두꺼우며, COD 제거 효율은 두 매질사이에는 변화가 거의 없으나, 암모니아성 질소의 제거에는 연탄재의 경우가 약간 높았다. 반응조내의 식종균으로는 합성폐수와 유사한 배지에서 동정 분리하여낸 토양미생물을 이용하였다 이 토양미생물은 기존의 활성슬러지균 보다 점착력과 침강성이 뛰어났다.

• 센서학회지
• /
• 제10권3호
• /
• pp.196-206
• /
• 2001

열 영상 촬영에 의한 평면형 크로멜-알루멜 다중접합 열전변환기(TC 1)의 실제 온도분포를 측정하였다. 또한 유한 요소법에 의한 3차원 ANSYS 프로그램으로 열전변환기를 컴퓨터 시뮬레이션하여 열전변환기(TC 1${\sim}$TC 6)의 입력전력에 따른 온도분포를 예측하였다. TC 1의 고온 접합부 온도와 저온 접합부 온도의 차이가 가장 작고 TC 6의 고온 접합부 온도와 저온 접합부 온도의 차이가 가장 크게 나타나기 때문에 TC 1의 전압 감응도는 가장 작은 3.09 mV/mW로 측정되었고 TC 6의 전압 감응도는 가장 큰 4.03 mV/mW으로 측정되었다.

• International Journal of Aeronautical and Space Sciences
• /
• 제18권2호
• /
• pp.206-214
• /
• 2017

In this study, measurement of thermophysical properties of materials at high temperatures was performed. This experiment employed a heater device to heat the material to a high temperature. The images of the specimen surface due to thermal load at various temperatures were recorded using charge-coupled device (CCD) cameras. Afterwards, the full-field thermal deformation of the specimen was determined using the digital image correlation (DIC) method. The capability and accuracy of the proposed technique are verified by two experiments: (1) thermal deformation and strain measurement of a stainless steel specimen that was heated to $590^{\circ}C$ and (2) thermal expansion and thermal contraction measurements of specimen in the process of heating and cooling. This research focused on two goals: first, obtaining the temperature dependence of the coefficient of thermal expansion, which can be used as data input for finite element simulation; and second, investigating the capability of the DIC method in measuring full-field thermal deformation and strain. The results of the measured coefficient of thermal expansion were close to the values available in the handbook. The measurement results were in good agreement with finite element method simulation results. The results reveal that DIC is an effective and accurate technique for measuring full-field high-temperature thermal strain in engineering fields such as aerospace engineering.

• 한국항행학회논문지
• /
• 제4권2호
• /
• pp.103-113
• /
• 2000

유연체 부착물을 갖는 인공위성의 수학적 모델링에 관한 방법은 몇 가지들이 있다. 본 논문에서는 FEM에 비해 차수가 낮아 계산시간을 줄일 수 있는 근사화 방법중 하나인 추측모드법을 사용한 하이브리드 라그랑지 방정식을 유도하였다. 이것들은 각속도에 관한 세개의 식들과 유연변위에 관한 두개의 식들로 이루어지며, 위성 본체와 태양전지판의 상호작용을 표현한다. 자세제어에 있어서, 제어법칙은 제어입력뿐만 아니라 진동억제를 포함한 성능지수를 최소화하도록 설계하였다. 이 목적을 위해 본 논문은 LQG와 LQG/LTR 제어기를 사용하였고, 결과로는 진동억제를 고려한 소각선회 성능을 보여준다. 특히, 본 논문에서는 특이시스템을 특이값 분리에 의한 비특이시스템 가정법을 통한 LQG/LTR 설계를 보여준다.

• 기술혁신연구
• /
• 제18권2호
• /
• pp.121-145
• /
• 2010

미국특허를 대상으로 국가 27대 녹색기술의 기술산업연계구조 분석을 수행하였고, 이를 통해서 산업 녹색도 지수를 개발하였다. 산업의 녹색도 지수는 녹색기술 창출지수 및 활용지수의 합으로 규정하였으며, 산업의 녹색기술 수용도의 의미를 갖는다. 지수 분석결과, 전체특허기술에 대한 수용도가 매우 높았던 대부분의 IT 관련 산업들은 27대 녹색기술에 대한 수용도 즉, 산업 녹색도는 상대적으로 낮게 나타나는 경향을 나타내었다. 반면, 배터리, 무기화합물 등 화학 관련 산업 및 에너지 관련 산업의 경우 산업의 녹색도가 전체특허 기술 수용도 대비 월등히 증가하여, 녹색성장시대에 크게 주목받는 산업으로 나타났다. 녹색 기술에 대한 효과적인 투자전략 수립을 위해서는, 관련 산업으로의 파급효과를 측정하는 것이 매우 중요하며, 본 연구에서 제시한 산업녹색도 지수는 이에 대한 정량적이면서 활용이 용이한 대안으로 제시된다. 한편, 본 연구결과로 제시된 산업의 기술 수용지수는 녹색기술 분야에 한정되지 않고 타 기술분야를 대상으로도 범용적으로 활용할 수 있다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.414-420
• /
• 2005

The ShortStack Micro Server enables any product that contains a microcontroller or microprocessor to quickly and inexpensively become a networked, Internet-accessible device. The ShortStack Micro Server provides a simple way to add LonWorks networking to new or existing smart devices. . It implements the LonTalk protocol and provides the physical interface with the LonWorks communication. The ShortStack host processor can be an 8, 16, or 32-bit microprocessor or microcontrollers. The ShortStack API and driver typically require about 4kbytes of program memory on the host processor and less than 200 bytes of RAM. The interface between host processor and the ShortStack Micro Server may be a Serial Communication Interface (SCI). The LonWorks control module with a high performance is developed, which is composed of the 8 bit PIC Microprocessor for host processor and the smart neuron chip for the ShortStack Micro Server. This intelligent control board is verified as proceeding the various function tests from experimental system with an boost pump and inverter driving systems. It is also confirmed that the developed control module provides stably 0-10VDC linear signal to the input signal of inverter driving system for varying the induction motor speed. Thus, the experimental results show that the fabricating intelligent board carried out very well the various functions in the wide operating ranges of boost pump system. This developed control module expect to apply to industrial fields to require the comparatively exact control and monitoring such as multi-motor driving system with inverter, variable air volume system and the boost pump water supply systems.