• STI Policy Review
• /
• 제7권2호
• /
• pp.106-131
• /
• 2016

The general purpose of this paper is to identify opportunities for and to measure existing collaboration on research and development between institutions from the countries of Asia and Latin America in FEALAC's framework, in the fields of biotechnology and nanotechnology and their convergence. The methodological approach includes scientific and technological surveillance and research seeking to identify both the R&D and innovation capacities of the countries as well as the degree of international cooperation between countries of the two regions; case studies and a study of the governance framework of international collaboration in R&D about issues considered global challenges. The study has three main findings. First, nanotechnology, biotechnology and their convergence contribute to solving the problem of contamination by heavy metals affecting most of the countries that are part of FEALAC and to address problems arising from the accelerated rate of energy consumption, which also contributes to environmental damage. In this scenario, important business opportunities arise from the adaptation and development of bio-refinery technologies. Second, the scientific relationship between FEALAC countries, mainly between Asian and Latin American countries, is weak as can be seen in research for articles and patents. But there is plenty of room and potential for improvement. Third, current and upcoming joint R&D programs and projects should be linked both to existing governance structures and to new ones that serve as experiments of STI public policy regarding innovative management of intellectual property and capacity building. Practical implications are included in lessons learned and a set of recommendations involving a couple of proposals. One proposal calls for research and innovation in promising fields for international cooperation. Another proposal creates mechanisms in the governance framework for sharing knowledge, capacity building, and funding.

• 한국식품과학회지
• /
• 제46권4호
• /
• pp.404-409
• /
• 2014

본 연구에서는 영양적으로 우수한 밀기울의 식품 소재화를 위해 산지별 밀기울의 고압균질처리에 따른 이화학적 특성변화를 연구하였다. 고압균질처리로 밀기울의 입자 크기를 효과적으로 줄일 수 있었으며, 이러한 미세화 처리에 의해 물리 화학적 특성을 변화시킬 수 있었다. 입자 크기와 용적밀도가 감소함에 따라 보수력, 팽창력, 보유력 및 양이온치환력을 증가시킬 수 있었다(p<0.05). 이는 고압균질기의 노즐 지름이 작을수록, 통과횟수가 많을수록 증가하는 경향이 있었다. IC 200으로 1회 및 IC 100 2회 처리한 시료에 있어서는 유의적인 차이가 있었으나 IC 100 5회 처리한 시료는 IC 100 2회 처리한 시료와 유의적인 차이가 없었다. 따라서 경제적인 면과 기능적인 면을 고려할 때 IC 100 2회 처리한 시료가 가장 효율적임을 알 수 있었다. 또한 산지별 밀기울 간에는 이화학적 특성에 큰 차이가 없는 것으로 나타나 우리밀과 수입밀의 밀기울 특성에는 차이가 없음을 알 수 있었다. 결론적으로 밀기울의 고압균질처리에 의해 불용성 식이섬유소의 기능을 향상시킬 수 있으며 나아가 섬유소를 강화하고 유지와 수분의 보유를 필요로 하며 지질 흡수를 저해하는 식품에 기능성 소재로서 활용할 수 있을 것이다. 따라서 본 연구는 미세화 처리를 통한 기능성 식품소재 개발에 도움이 될 것으로 사료된다.

• Structural Engineering and Mechanics
• /
• 제26권3호
• /
• pp.277-295
• /
• 2007

3-D wall panels are used in construction of exterior and interior bearing and non-load bearing walls and floors of building of all types of construction. Fast construction, thermal insulation, reduced labor expense and weight saving are the most well pronounced advantage of such precast system. When the structural performance is concerned, the main disadvantage of 3D panel, when used as floor slab, is their brittleness in flexure. The current study focuses on upgrading ductility and load carrying capacity of 3D slabs in two different ways; using additional tension reinforcement, and inserting a longitudinal concentrated beam. The research is carried on both experimentally and numerically. The structural performance in terms of load carrying capacity and flexural ductility are discussed in details. The obtained results could give better understanding and design consideration of such prefabricated system.

• 한국산업정보학회논문지
• /
• 제22권4호
• /
• pp.79-95
• /
• 2017

본 연구는 급변하는 반도체 산업의 특성을 고려하여 고객가치 제고와 기술혁신 경쟁우위를 위해 R&D역량과 시장지향성이 제품혁신성과에 유의한 영향을 미치는지를 연구하였다. 즉, 연구모형에서와 같이 독립변수인 R&D역량, 시장지향성이 기술혁신지향성이라는 조절변수를 통해 종속변수인 제품혁신성과에 미치는 인과관계를 살펴보는데 그 목적이 있다. 본 연구를 위하여 반도체 기업의 개발업무 종사자를 대상으로 설문을 진행하였고 최종적으로 118부의 유효한 설문지를 회수하였다. 수집된 자료는 인구통계학적 특성을 통제변인으로 하는 다중회귀분석을 진행하였고 기술혁신지향성 조절효과는 위계적 회귀분석을 실시하였다. 분석결과 기업의 R&D역량 중 R&D집약도와 외부네트워크 역량이 높을수록 제품혁신성과가 높아지는 것으로 나타났고 시장지향성 중 고객지향성과 경쟁자지향성에 대하여 제품혁신성과가 높게 나타났다. 또한 R&D역량만이 기술혁신지향성의 조절효과가 있음을 확인하였다. 본 연구결과는 반도체 기업의 제품혁신성과 창출을 위한 R&D역량과 시장지향성에 대한 이해를 높이고 기업의 제품혁신성과와 지속적인 경쟁우위를 확보하기 위해 기술혁신지향성이 중요한 조절 요소임을 실증적으로 지지하는 연구 자료가 될 것으로 기대한다.

• Structural Engineering and Mechanics
• /
• 제51권4호
• /
• pp.565-579
• /
• 2014

The pullout capacity of plate anchors has been studied extensively over the past 40 years. However, very few studies have attempted to calculate the pullout capacity of anchors in sandy slopes. In this paper, three upper bound approaches are used to study the effect of a sloping ground surface and friction angle on pullout capacity and failure of plate anchors. This includes the use of; simple upper bound mechanisms; the block set mechanism approach; and finite element upper bound limit analysis. The aim of this research is to better understand the various failure mechanisms and to develop a simple methodology for estimating the pullout capacity of anchors in sandy slopes.

• 설비공학논문집
• /
• 제17권1호
• /
• pp.39-46
• /
• 2005

The present study concerns an experimental study of a R-22 heat pump system consisted of liquid and liquid heat exchangers. The test was performed for various systems of a single-, tandem-, and two stage-cycle at the same environmental conditions of temperature. Various experiments of the heat pump system were peformed to compare the heating capacity and COP, when the outdoor temperature is near $-15^{\circ}C$ and the indoor temperature is $20^{\circ}C.$ As the results of the present study, the system of Tandem(parallel) cycle showed the best heating performance, while the discharge temperature of refrigerant was too high. In case of the system of two stage cycle, the performance characteristics were significantly improved by employing the inter cooler.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 C
• /
• pp.1658-1660
• /
• 2004

Use of higher voltage and higher capacity of power systems and their equipment is leading to an increase in the size of the entire system. In order to reduce the cost of constructing a substation, it is necessary to reduce the size of equipment. So, this paper described optical sensor, which exploited the electric and magnetic potentiometer to sense the measured voltage and current of medium voltage GIS. It can be used both in measurement and in protection relays as its well linearity, rapid response, broad dynamic range, wide frequency band, no magnetic saturation, small in volume, light weight, and saft in insulation.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.171-173
• /
• 2006

지중 전력케이블의 접속함은 금속보호관(Casing or Protective Tube)의 전기적 검토를 통해서 적정 단면적을 산정하여 고장시 고장전류를 흘려주어야 한다. 현재 국내외 금속보호관은 그 재료로서 Copper를 사용하고 있으나 현장에서의 시공성 및 취급 용이성 때문에 알루미늄 보호관으로 재질 변경이 이루어지고 있다. 본 논문에서는 기존의 Copper보호관과 Alumlnium보호관에서의 비교검토를 통해서 Aluminium보호관의 유효성을 검토하고 구리에서 알루미늄으로 재질 변경이 이루어 졌을 때 열적 제약조건을 고려하여 적정단면적을 재 산정한다. 또한 산정된 단면적은 단락시험을 통해서 그 유효성을 입증하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 ITC-CSCC -2
• /
• pp.990-994
• /
• 2000

The design of LAI(Local Area Identifier), the first paging area for searching the mobile terminal has a close relation with the performance of paging channel in CDMA cellular network. This paper discusses the performance of the forward channel of IS-95 CDMA standard, known as the paging through the related messages such as call control message, channel assignment message. Modeling and simulation work were conducted to quantify the performance of paging channel in terms of traffic handling capacity and blocking levels. This result serves as illustrative guidelines for the proper engineering of common control channel, which has a major impact on the overall performance of cellular network.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2001년도 춘계학술대회 발표논문집
• /
• pp.82-83
• /
• 2001

Selected microbes was applied to the treatment of textile wastewater with support particles. To enhance the treatment efficiency, biological treatment was achieved as first process. Wastewater with a COD of 870 ppm and color of 1340 PtCo unit was continuously treated in a 1.8 ton capacity reactor. In the case of combined processes, the effluent COD concentration and color were 40 ppm (95.4% reduction) and 20 PtCo unit (98.5% reduction).