• Journal of Korean Society for Quality Management
• /
• v.42 no.2
• /
• pp.145-152
• /
• 2014

Purpose: As the number of people directly employed in making things declines, the cost of labour as a proportion of the cost of production and delivery will diminish too. This will make to move the focus of quality management because new manufacturing techniques make it cheaper and faster to respond to changing local tastes Methods: This discussion is induced by understanding that change the point of view of quality. Results: Mark-processing method using a mold of 3D-printer is different from traditional manufacturing methods. Design, rapid prototyping of products produced by the right way, many changes in many industries will be created. Therefore, the design will be more emphasis on the importance of quality. Conclusion: As manufacturing goes digital, a Quality great change is now gathering pace. It will allow things to be made economically in much smaller numbers, more flexibly and with a much lower input of labour, thanks to new materials, completely new processes such as 3D printing. So we must change the vantage point of quality, from process to Design, R&D, and Delivery.

• Journal of Korea Technology Innovation Society
• /
• v.16 no.3
• /
• pp.784-808
• /
• 2013

The importance of the creation, diffusion and utilization of the knowledge and information has been magnified at the 21st century of knowledge and information society. If the utilization level of the web site of the national-level R&D information system is enhanced, the duplication of the researches as well as overlapped R&D investment could be greatly reduced. In this regards, this study aims to identify the factors which affect customer value and intention of continued usage for the national science & technology information services (NTIS & NDSL). The empirical research results show that information service quality have a significant influence on the continuous usage intention of science & technology information service. Customer value, as well, influence the continued usage intention as a mediating variable. In addition, the situational factors of information use by itself shows a significant effect on customer value, but it does not moderating the relationship between information service quality and customer value. After a description of research result, we discussed implications and limit of the study as well as future study direction.

• Journal of Environmental Health Sciences
• /
• v.46 no.2
• /
• pp.204-213
• /
• 2020

Objective: This study is aimed at investigating indoor air quality on public transportation (subway, train, and bus) according to changes in season and time. Methods: We evaluated TVOC and HCHO on public transportation based on the un-controlled parameters of the Ministry of Environment. We also measured temperature and humidity since they affect the concentration of TVOC and HCHO. For public transportation classification, subway lines were classified into Lines 1 to 4. Additionally, trains were classified as ITX and KTX. Results: When comparing summer and winter on public transportation, the concentrations of TVOC and HCHO did not show any particular tendency. However, the concentrations of TVOC and HCHO during traffic congestion was higher than levels during times of non-congestion on most public transportation. In summer and winter, the measurement results for temperature and humidity showed a normal range, so temperature and humidity did not affect the concentrations of TVOC and HCHO. In the case of TVOC, TVOC concentrations on new trains were found to be relatively higher than on older ones, but there was no statistically correlation. Conclusions: A survey was conducted on the indoor air quality on public transportation. This study also analyzed data based on TVOC and HCHO for designing policies and managing indoor air quality.

• Journal of Korea Technology Innovation Society
• /
• v.20 no.2
• /
• pp.406-429
• /
• 2017

Most of the GRI's that are organized and operate a regional. However, the limitations of the building that faces its own innovation system of the area, difficulties in management of the individual institution and community organizations operating in various industries such as inadequate to meet demand. This study examined the quality attributes of the GRI's regional organization's operations and policy improvements on the GRI's key features and regional organizations in the region to suggest future operating efficiency in the consumer's point of view based on the Kano Model and Timko Model. The results showed the different properties depending on the quality of corporate premises, and whether or not its own R&D organization. These results could be used as a basis for future policy design in accordance with GRI's regional organization establishment, operation and evaluation.

• Journal of Power System Engineering
• /
• v.19 no.6
• /
• pp.47-53
• /
• 2015

Korea is the geographic location during the summer, the temperature rising to $35^{\circ}C$ and winter temperature is $-15^{\circ}C$ to reduce the air temperature changes, such as relatively large compared to other countries. This increase or decrease of the harmful exhaust gas discharged from automobile substantially inconvenience a significant impact on the active side of the car engine temperature and exhaust gas reducing device receives a large impact on the atmospheric temperature is regulation to be different. However, domestic vehicle emissions test temperature of $20{\sim}30^{\circ}C$ is it does not reflect this situation the actual test temperature to accurately measure the exhaust gas volume of the vehicle is difficult. In this study, domestic automobile exhaust gas test conditions of a test temperature $20{\sim}30^{\circ}C$ various temperatures, including (35, 25, 0, -7, -15, $-25^{\circ}C$) under the two vehicles (2.0L MPI, 2.4 L GDI) as was discussed with respect to the exhaust gas characteristics of the vehicle according to the ambient temperature gas. As a result, domestic emissions test temperature of $25^{\circ}C$ than average conditions were temperature decreases greenhouse gas emissions and increase overall increased by up to 15 times higher. Air temperature and the engine exhaust gas inconvenience a direct effect on the activation temperature required in the reduction unit is determined to be an increase of emissions and greenhouse gases, and also an increase in the variety of lubricants based lubricating and viscosity reduction, such as the engine oil due to the low temperature of these result It is considered that shows the.

• Journal of Energy Engineering
• /
• v.16 no.3
• /
• pp.128-148
• /
• 2007

Quality assurance (QA) for nuclear R&D project is very concerned about the poor economy due to the improper selection of QA requirements. This paper proposes a new methodology for determining the relative importance weights of QA requirements considering the attributes of nuclear R&D project. QFD (Quality Function Deployment) is used as a conceptual framework and fuzzy number is introduced to capture the vagueness uncertainty existing in human judgement. Also we use a confidence attitude of decision-maker in order to improve the reliability of extracted attribute level of R&D project. Case study on a nuclear R&D project and scenario analysis are carried out to verify the usefulness and effectiveness of proposed methodology.

• Journal of Technology Innovation
• /
• v.25 no.3
• /
• pp.265-297
• /
• 2017

As corporate management enters the era of informatization or knowledge management, the level of patent quality, which is the fruit of R&D and technical innovation, is an important element of corporate competitiveness in this age of unbridled competition. This study analyzes the relevance between R&D stocks and 6 types of knowledge stock (patent quality) and corporate market values in utilization of related research models. With Tobin Q model utilized, 108,851 U.S. patents (observed value per year: 2,795) registered by 402 domestic enterprises were analyzed. As the Hall model was analyzed, it turned out that the R&D stock/asset, claim stock/patent stock, and citation stock/patent stock had positive effect on corporate market values. The inventor stock/patent stock also show positive effect on corporate market values.

• Applied Chemistry for Engineering
• /
• v.25 no.1
• /
• pp.27-33
• /
• 2014

The significance of soil environment is gradually increased due to the soil and underwater contamination caused by petroleum leak accidents. It requires a high cost and long period for the purification of soil compared with other environmental matrix such as water and air. For this reason, it has been embroiled in a legal conflict to find the pollution source and charge of cleanup. In this study, we analyzed the physical properties and typical additives of jet fuel to search a method that can distinguish kerosene and jet fuel contamination. In particular, the chemical marker in kerosene was visualized by the developer and the additives in jet fuel, such as antioxidant and metal deactivator were detected by GC-MS. This study could be used to judge petroleum source at soil contaminant accident sites.

• Journal of Sensor Science and Technology
• /
• v.31 no.2
• /
• pp.102-106
• /
• 2022

Currently, the demand for real-time monitoring of water quality has increased dramatically. Total organic carbon (TOC) analysis is a suitable method for real-time analysis compared with conventional biochemical oxygen demand (BOD) and chemical oxygen demand (COD) methods in terms of analysis time. However, this method is expensive because of the complicated internal processes involved. The photocatalytic titanium dioxide (TiO2)-based TOC method is simpler as it omits more than three preprocessing steps. This is because it reacts only with organic carbon (OC) without extra processes. We optimized the rate between the TiO2 photocatalyst and binder solution and the TiO2 concentration. The efficiency was investigated under 365 nm UV exposure onto a TiO2 coated substrate. The optimized conditions were sufficient to apply a real-time monitoring system for water quality with a short reaction time (within 10 min). We expect that it can be applied in a wide range of water quality monitoring industries.

• Journal of Service Research and Studies
• /
• v.12 no.3
• /
• pp.60-69
• /
• 2022

In this study, to verify the effectiveness of the persona-type consumer analysis data service, a study was conducted focusing on the consumer analysis service use case of www.ethno-mining.com. The case was targeted at the 'Small Business Design Difficulty Resolving Support Project' of the Gangwon Institute of Design Promotion. The progress of this study was to develop a questionnaire to measure the user satisfaction and effectiveness of the service, study the consumer analysis data of the persona method of the www.ethno-mining.com system, study related theories, compare similar services, and conduct questionnaires; The results were analyzed and tested. In the result of testing the participants in the 'Small Business Design Difficulty Resolving Support Project' of the Gangwon Design Promotion Institute, the persona-style consumer analysis data got a positive response in terms of user satisfaction, and a regression that measures the effectiveness of the service on the company's R&D In the analysis, it was found that there are practical effects for companies by reducing time, reducing costs, smooth communication between developers, securing expertise in consumer analysis, and improving the overall quality of R&D during R&D.