• Elastomers and Composites
• /
• v.38 no.2
• /
• pp.122-127
• /
• 2003

Compounding, using such thermoplastic elastomer as styrene-ethylene-butadiene-styrene (SEBS) blended with polypropylene(PP), oil, and other ingredients, was studied to develop a new material with excellent impact resistance and resilience for the replacement of environmentally toxic PVC sheet. Hardness decreased linearly with oil content in the SEBS/oil blend, and the tensile strength increased with PP content whereas elongation showed no effects over 50 phr of PP in SEBS/oil/PP blend. In the practical SEBS composition, proposed to replace the PVC sheet material, tensile and tear strength, as well as hardness, increased proportionally with PP content, while melt index decreased.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.4
• /
• pp.35-41
• /
• 2020

The small tracking radar is a very important component of the wire harness design because the components are organically connected. In addition, the cable connected to the signal processing unit and the servo unit having a large number of digital signals should be prepared to prevent the CPU of the signal processing unit from malfunctioning due to electromagnetic noise. Cables for signal transmission in the ◯◯ GHz band must reflect the design of temperature, vibration, and shock. To design a wire harness in a small space, the size of the connector must be minimized. The issues to be considered are described and the design plan is presented.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.857-860
• /
• 2008

This study shows systematic procedures for investigating creep and shrinkage properties of 50, 60, 70 MPa concrete mixes, which were developed by Lotte E&C R&D Ins. for Lotte Super Tower Jamsil. The concrete test was performed both local and foreign laboratory, S-Lab. and CTL Group respectively. The former have done for total five days. The procedures included the followings, specimen fabrication, mold removal, specimen marking, water bath curing, packaging, and shipment. The latter has been doing by CTL within PCA(Portland Cement Association). They are testing on static and dynamic modulus of elasticity, compressive strength, creep & shrinkage, splitting tensile strength. In the case of creep and shrinkage, the test will be doing for 18 months according to each loading age.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.22 no.5
• /
• pp.457-462
• /
• 2017

This paper proposes a digital power control of the LLC resonant half-bridge inverter for high power microwave oven application. Conventional half-bridge inverter for driving a microwave oven uses a hardware-based power control method which varies the frequency according to the AC source voltage. In this case, it is difficult to control the output power according to the variation of the load status of magnetron. The proposed power control consists of an instantaneous current generator and a current controller. Instantaneous current generator makes an instantaneous current reference from power command using input voltage information. Current controller controls input current which has an information of status of magnetron. The proposed power control does not require any compensation algorithm for the change of the load status of the magnetron and change of input voltage. The validity of the proposed method for the control of the change of input voltage and frequency is verified by both simulation and experiment.

• The Journal of the Acoustical Society of Korea
• /
• v.36 no.4
• /
• pp.229-237
• /
• 2017

In this paper we propose an auto tonal detection method which exploits short term stationary when targets located in a detection beam area and then additional methods are proposed in order to reduce the computational complexity of the proposed method. The proposed method is adaptive to input signals and robust against interference caused by multiple targets because it compares an expected value of input signals with a threshold value which are estimated from a single beam while signals are keep stationary. The performances of the proposed methods are evaluated using by simulated data and acquired data from real ocean. The proposed method has shown better performance than conventional CFAR (Constant False Alarm Rate) methods.

• Korean Journal of Agricultural Science
• /
• v.21 no.1
• /
• pp.54-59
• /
• 1994

An antibacterial component was isolated from the roots of evening primrose(Oenothera odorata Jacquin). The component was purified by repeated preparative TLC of the chloroform-extract with solvent system of toluene(7):ethyl acetate(4):formic acid(O.8). NMR spectrum indicated that it is a steroid compound containing radical(-C=C-C=0) and aromatic structures. Its antibacterial activity against strains of the genus Streptococcus was relatively high, the MIC value was 50 acccording to the Hoechst Manual-345, as compared with the other genera such as Staphylococcus and Escherichia.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.17 no.5
• /
• pp.18-26
• /
• 2013

This study suggested techniques to reduce burning rate and their effects for the AP thermoplastic composite propellant. Burning rate obtained through ground tests using a small size motor were analyzed to investigate the effects of AP particle size and LiF of 0.5~2.0% on the inhibition reaction for the PEBAX/AP thermoplastic propellant. The results showed that utilization of large size particle of AP and addition of LiF under 2.0% can reduce the burning rate sufficiently and their quantitative effects were suggested in this paper.

• Korean Journal of Materials Research
• /
• v.10 no.11
• /
• pp.743-748
• /
• 2000

Amorphous carbons(neddle cokes), which are used as anode materials for lithium ion secondary batteries, were graphitized or heat-treated at high temperature in $N_2$ atmosphere and in Ar atmosphere, after adding $B_2O_3$. After then, using transmission eletron microscopy, their surface micro-structures and the formations and distributions of the second phases were analyzed. It was studied that such analyzed results were related to the cell capacities and efficiencies.

• The Korean Journal of Ceramics
• /
• v.2 no.2
• /
• pp.95-101
• /
• 1996

Variations of the leakage current behaviors and interface potential barrier $({\Phi}_B)$ of rf-sputter deposited (Ba, Sr)$TiO_3$ (BST) thin films with thicknesses ranging from 20 nm to 150nm are investigated as a function of the thickness and bias voltages. The top and bottom electrodes are dc-sputter-deposited Pt films. ${\Phi}_B$ critically depends on the BST film deposition temperature, postannealing atmosphere and time after the annealing. The postannealing under $N_2$ atmosphere results in a high interface potential barrier height and low leakage current. Maintaining the BST capacitor in air for a long time reduces the ${\Phi}_B$ from about 2.4 eV to 1.6 eV due to the oxidation. ${\Phi}_B$ is not so dependent on the film thickness in this experimental range. The leakage conduction mechanism is very dependent on the BST film thickness; the 20 nm thick film shows tunneling current, 30 and 40 nm thick films show Shottky emission current.

• Journal of the Microelectronics and Packaging Society
• /
• v.16 no.1
• /
• pp.27-31
• /
• 2009

In this paper, the polymer adhesive bonding technology using wafer-level technology was investigated and warpage results were analyzed. Si and glass wafer was bonded after adhesive polymer layer and dam pattern for uniform state was patterned on glass wafer. In this study, warpage result decreased as the low of bonding temperature of Si wafer, bonding pressure and height of adhesive bonding layer. The availability of adhesive polymer bonding was confirmed by TC, HTC, Humidity soak test after dicing. The result is that defect has not found without reference to warpage.