• Journal of the Korean Magnetics Society
• /
• v.5 no.5
• /
• pp.610-613
• /
• 1995

The effect of processing parameters such as milling, additives and sintering atmoshpere on the magnetic properties of Mn-Zn ferrite was investigated. The experiment was followed by general ceramic fabrication process and added additives were $CaCO_{3}$, $SiO_{2}$, $V_{2}O_{5}$, $ZrO_{2}$, and $Nb_{2}O_{5}$. The effects of additives could be divided into three categories which were formation ofliquid phase, substitution in lattice and inducing stress. Core loss smong the magnetic properties was dependent mainly on the additives and also correlated with processing parameters. As a result, an optimum condition of preparing process for a high quality Mn-Zn ferrite was suggested by controlling the correlation of each processing parameters.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.9
• /
• pp.685-697
• /
• 2017

In this paper, it is presented the result of design and fabrication for C-band solid state high power amplifier unit and components using in search radar. The solid state power amplifier(SSPA) assembly was fabricated using GaN(Gallium Nitride), which is semiconductor device, and the transmit signal output power of the solid state high power amplifier unit is generated by combining the transmit signal power of the solid state power amplifier configured in parallel through a design and fabricated waveguide type transmit signal combine assembler. Designed solid state high power amplifier unit demonstrated C-band 500 MHz bandwidth, maximum 10.5% duty cycle, transmit pulse width from $0.0{\mu}s{\sim}000{\mu}s$, and transmit signal power is 44.98 kW(76.53 dBm).

• Korean Chemical Engineering Research
• /
• v.47 no.5
• /
• pp.565-571
• /
• 2009

This study was conducted to evaluate hydrocarbon and water dew points of natural gas. For this purpose, algorithm of suppressing divergence was devised to evaluate hydrocarbon dew point up to near critical point and algorithm for finding water dew points lower than that of hydrocarbon, which cannot be calculated by commercial dew point program, was developed. The evaluated values were compared to commercial program and ISO reference values, and the results showed that deviations were zero.

• Korean Chemical Engineering Research
• /
• v.47 no.5
• /
• pp.599-607
• /
• 2009

This study was conducted to derive the five correlations which could predict specific gravity(or heating value), compression factor, density, etc., if we know heating value or specific gravity only. To make a sufficient number of raw data for regression, SGERG EOS was modified into equation of heating value. Based on these raw data, five correlations were obtained and the uncertainties of the correlations were evaluated. The results showed that the uncertainties were near 0.1% in most conditions of natural gas and so the correlations could be used in natural gas industry and academic fields.

• Journal of the Korean Society of Systems Engineering
• /
• v.15 no.2
• /
• pp.47-56
• /
• 2019

Although the weapon systems are becoming more diverse and complex, they are progressing in a short development period and a longer test and evaluation period. The more difficult the given environment is, the more efforts and performance of quantitative target values can be made by development agencies to carry out stable projects. However, these target values of the Integrated Logistics Support are not specified in the requirements and being set during the system development phase. In this paper, application of MOEs, MOPs and TPMs for ILS are presented and provided the basis for carrying out systematic Verification & Validation activities. As a result that MOEs of the ILS were chosen as Availability and MOPs as Mission Reliability, Logistics Reliability, Maintainability and Supportability and TPMs as MTBF, MTBCF, MTTR and so on. In particular, it is appropriate tailoring and apply the TPMs considering the cost, schedule, scope of work and characteristics of the project.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2001.10b
• /
• pp.1435-1438
• /
• 2001

MGCP는 IETF에서 제안한 VoIP기술의 표준 프로토콜로서 특유의 단순함(Simplicity)을 이용하여 다른 프로토콜과의 연동을 용이하게 구현할 수 있도록 설계되었으며, 현재 다양한 시스템과 프로토콜로 구성되어 있는 망을 통합하기 위한 적절한 해결책으로 부각되고 있다. 본 논문에서는 MGCP기반의 AX-Gateway 시스템의 설계기법에 관하여 기술한다. MGCP기반의 AX-Gateway 시스템은 H.323과의 연동을 위하여 내부적으로 자신에게 연결된 Endpoint의 상태정보를 유지하도록 설계하였다. 이러한 구조를 통해 자신에게 전달되는 호처리 요청에 대한 유효성을 MG 차원에서 검사함으로써, Call Agent의 부하를 줄여 시스템의 안정성과 성능 향상을 기대할 수 있다. 이렇게 구현된 AX-Gateway 시스템의 성능을 측정하기 위하여 통화음질과 지연, 최대 동시 통화 사용자의 수를 측정한 결과를 나타내었다.

• Annual Conference on Human and Language Technology
• /
• 2009.10a
• /
• pp.116-120
• /
• 2009

최근 IPTV 상용화와 디지털 방송 본격화는 사용자에게 다양한 방송 프로그램을 제공한다는 장점도 있지만, 동시에 수많은 프로그램을 탐색하여 선별해야 하는 부담을 주고 있다. 이러한 불편함을 해소하고자 최근에는 사용자 선호도와 방송 프로그램 정보를 이용하여 사용자 취향에 맞는 프로그램을 자동으로 추천하는 서비스의 요구가 증대되고 있다. 또한 궁극적으로 방송 서비스가 '개인화'와 '개방화'의 형태로 진행되고 있다는 점을 감안하면, 추천 서비스는 TV 프로그램 뿐만 아니라 광고도 포함해야 하며, 다중 언어를 지원하는 형태로 발전되어야 한다. 본 논문에서는 다중 언어를 지원하는 개인화된 TV 프로그램 및 광고 추천 서비스를 위한 하나의 시스템을 제안한다. 우리는 먼저 사용자 시나리오를 작성하고, 기능 요구사항들을 분석하여 시스템 구조를 설계한다. 그리고 다중 언어를 지원하는 시스템에서의 한글 처리 방법도 간단히 설명한다. 본 연구는 현재 유럽 공동기술 개발 사업 과제의 일환으로 진행되고 있어, 여기에서는 현 시점의 결과물인 시나리오, 시스템 구조 설계, 한글 처리까지 소개하고 있다.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.20 no.6
• /
• pp.844-852
• /
• 2017

Since guided weapon is high-cost and one-shot device which is non-reusable, it requires a lot of resources to prove required accuracy as a part of reliability demonstration. Once a test for proving accuracy rate of guided missile fails, it causes an additional cost and delay of schedule. This study introduces an equation for proper sample size and plan for guided-missile accuracy rate test in order to minimize the risk of test failure. Proper sample size for the test is derived by considering the reliability growth. Furthermore, each task for accuracy rate test is defined according to the development step. Therefore, this study can contribute to reduce sample size for accuracy rate test in order to meet the reliability requirement and assure transparency in the test process.

• Transactions on Electrical and Electronic Materials
• /
• v.3 no.1
• /
• pp.9-13
• /
• 2002

In this work, the surface of inorganic fillers were modified with some functional groups such as stearic acid, aliphatic long chain, vinylsilane and aminosilane to control the interaction between inorganic fillers and polymer matrix. Ethylene-vinyl acetate copolymers (EVA) with various amount of vinyl-acetate and copolyether-ester elastomer were used as polymer matrix. The addition of inorganic fillers increases flame retardancy, but results in steep drop of electrical and mechanical properties, which may be caused by the defects in the interface between organic/inorganic hybrid composites. The hybrid composites are found to show better mechanical properties and higher volume resistivities as inorganic fillers are well dispersed and have good adhesion with polymer matrix. Also, the most effective type of functional group coated on fillers depends on the chemical structure of polymer.

• Current Optics and Photonics
• /
• v.3 no.1
• /
• pp.8-15
• /
• 2019

We describe a common optical system that merges a LADAR system, which generates a point cloud, and a more traditional imaging system operating in the LWIR, which generates image data. The optimum diameter of the entrance pupil was determined by analysis of detection ranges of the LADAR sensor, and the result was applied to design a common optical system using LADAR sensors and LWIR sensors; the performance of these sensors was then evaluated. The minimum detectable signal of the $128{\times}128-pixel$ LADAR detector was calculated as 20.5 nW. The detection range of the LADAR optical system was calculated to be 1,000 m, and according to the results, the optimum diameter of the entrance pupil was determined to be 15.7 cm. The modulation transfer function (MTF) in relation to the diffraction limit of the designed common optical system was analyzed and, according to the results, the MTF of the LADAR optical system was 98.8% at the spatial frequency of 5 cycles per millimeter, while that of the LWIR optical system was 92.4% at the spatial frequency of 29 cycles per millimeter. The detection, recognition, and identification distances of the LWIR optical system were determined to be 5.12, 2.82, and 1.96 km, respectively.