• Bulletin of the Korean Chemical Society
• /
• 제31권8호
• /
• pp.2375-2378
• /
• 2010

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 지반공학 공동 학술발표회
• /
• pp.499-509
• /
• 2005

We have many foundations which were constructed on the karstic areas where solution cavities and fractured zone may form under, or close to foundations. The fact that the ground under the pier foundations was reinforced with the three axial high pressure jet grouting is confirmed through out about two hundred design reports. It is necessary that evaluation of a simple application of high pressure jet grouting method on the karstic areas containing solution cavities. In this study, the improved situation and reinforcing methods of the ground under the pier foundations are proposed based on the evaluation of design reports for the express highway and No.38 national roads.

• Journal of Dairy Science and Biotechnology
• /
• 제21권2호
• /
• pp.81-87
• /
• 2003

우유의 여러 가지 품질 평가방법 중에서 소비자의 입장에서 중요한 기준이 되는 관능검사를 통해서 ESL우유와 non-ESL우유의 품질을 비교하여 그 차이점을 확인하였다. ESL우유의 1개사 제품과 non0ESL우유 4개사 제품을 $5^{\circ}C$ 와 $10^{\circ}C$에서 시료의 pH 및 적정산도는 그 변화가 크지 않았으며, 유성분인 fat, protein, lactose의 변화 역시 크지 않았다. 반면에 관능적으로 평가된 신섬함은 보존 5일차에 가장 신선하게 나타났다. ESL우유와 non-ESL우유의 QDA(quantitative descriptive analysis) diagram에 따르면, 동일한 조건상에서 저장지간 중 non-ESL우유의 관능적 품질 저하가 ESL우유보다 컸으며, 그 정도는 $10^{\circ}C$에서 두드러졌다. 우유의 신선도 평가 기준인 FFA(free fatty acid)와 관능적으로 느끼는 신선도 상의 상관분석을 통해서, 우유의 신선도는 FFA보다 우유의 풍미 및 미생물적 부패와 상관관계가 크다는 것으로 확인되었다. 결론적으로 우유의 신선도 결정에는 관능적 풍미가 가장 중요한 기준이 되며, non-ESL우유보다 ESL우유가 보존기간 중 신선함이 오래 지속되는 것으로 확인되었다.

• 한국추진공학회지
• /
• 제19권2호
• /
• pp.55-64
• /
• 2015

본 연구에서는 75톤급 추진기관 시험설비 화염유도로 설계안에 대한 열적 안전성 및 연소가스의 안전한 배출을 평가하기 위하여 3차원 화염냉각해석을 수행하였다. 화염과 냉각수 간의 열전달 및 상변화 과정을 모사하기 위하여 Mixture 다상모델을 적용하였으며, 단일 화학종 비반응 플룸모델을 이용한 화염냉각해석을 수행하였다. 본 해석결과를 통하여 냉각수 유량에 따른 화염유도로 벽면에서의 최고 온도값을 예측하였으며, 또한 콘크리트 내화온도에 해당하는 최소 냉각수 유량을 도출하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1661-1663
• /
• 2007

The contrast of display is one of the important specifications. Even if the contrast indicates luminance range which is a capability of the display and is greater in lower luminance or higher luminance, we consider that the greater contrast gets not the better performance. It is not the same value in human visual system. In practice, it is difficult to achieve the full dynamic range seen by human beings using electronic equipment. Therefore, we consider ambient condition and human perception to calculate perceptual contrast using the CIECAM02. In this paper, we propose perceptual contrast that is calculated using the brightness of CIECAM02.

• 한국지진공학회논문집
• /
• 제21권6호
• /
• pp.295-301
• /
• 2017

This paper relates to the study of load characteristics applicable to wind turbine generators induced by earthquakes. An artificial design earthquake wave generated through the target spectrum and the envelope function of Richter Magnitude Scale (ML) 7.0 as in ASCE4-98 was created. A simulation of earthquake loads were performed according to the design load cases (DLC) 9.5~9.7 of GL guidelines. Additionally, simulation of seismic loads experienced by Wind Turbines installed in the Gyeongju region were carried out utilizing artificial earthquakes of ML 5.8 simulating the real earthquakes during the Gyeongju Earthquakes of Sept. 2016.

• Nuclear Engineering and Technology
• /
• 제41권3호
• /
• pp.347-354
• /
• 2009

Welding is required for a connection between two different components in the nuclear fuel of a pressurized water reactor. This work relies on a mechanical experiment and analytic results to investigate the structural integrity of nuclear fuel in a situation where some components are not welded to each other. A series of lateral vibration tests are performed in a test facility, and the test structures are examined in terms of dynamic behavior. In the tests, the displacement signal at every grid structure that sustains fuel rods is measured and processed to identify the dynamic properties. The fluid-elastic stability of the structure is also analyzed to evaluate susceptibility to a cross flow with an assumed conservative cross flow distribution. The test and analysis results confirm that the structural integrity can be maintained even in the absence of some welding connections.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.1136-1139
• /
• 2009

Recently, various Ni doping systems and thermal annealing systems have been developed for fabrication of polycrystalline silicon film using SGS (super grain silicon) for medium and largesize AMOLED panels. In this study, we compare the potential of Ni doping systems including ALD (atomic layer deposition), AMD (atmospheric metal deposition), in-line sputter, and crystallization annealing systems including batch type furnace, inline furnace, and RTA (rapid thermal annealing) developed for the SGS method. Additional requirements for those systems to be used for mass production of large AMOLED TVs are suggested based on evaluation results for both poly-Si films and TFT backplanes.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제39권2호
• /
• pp.71-76
• /
• 2013

Objectives: In three-dimensional computed tomography (3D-CT), the cant is evaluated by measuring the distance between the reference plane (or line) and the tooth. The purpose of this study was to determine the horizontal skeletal reference plane that showed the greatest correlation with clinical evaluation. Materials and Methods: The subjects were 15 patients who closed their eyes during the CT image taking process. The menton points of all patients deviated by more than 3 mm. In the first evaluation, clinical cant was measured. The distance from the inner canthus to the ipsilateral canine tip and the distance from the eyelid to the ipsilateral first molar were obtained. The distance between the left and right sides was also measured. In the second evaluation, skeletal cant was measured. Six reference planes and one line were used for the evaluation of occlusal cant: 1) FH plane R: Or.R - Or.L - Po.R; 2) FH plane L: Or.R - Or.L - Po.L; 3) F. Ovale plane R: Rt.F.Ovale - Lt.F.Ovale - Or.R; 4) F. Ovale plane L: Rt.F.Ovale - Lt.F.Ovale - Or.L; 5) FZS plane R: Rt.FZS - Lt.FZS - Po.R; 6) FZS plane R: Rt.FZS - Lt.FZS - Po.L, and; 7) FZS line: Rt.FZS - Lt.FZS. Results: The clinical and skeletal cants were compared using linear regression analysis. The FH plane R, FH plane L, and FZS line showed the highest correlation (P<0.05). Conclusion: The FH plane R and FH plane L are the most appropriate horizontal reference plane in evaluation of occlusal cant on 3D-CT.

• 대한산업공학회지
• /
• 제43권2호
• /
• pp.100-111
• /
• 2017

Evaluating the performance of R&D Activity is complicated because it is hard to quantify the R&D results unlike the traditional manufacturing or service industries. Recently, to overcome this, process-focused evaluation methods applying the philosophy of quality into R&D environment have been introduced. However, these quality activities are mainly conducted without feedback system after the evaluation work is done. The aim of this study is to present a R&D quality diagnosis framework to obtain the improvement opportunities from R&D process perspective. The research is designed as follows : First, R&D standard process and R&D quality elements are derived from a literature review. Second, the diagnosis objects are obtained by investigating the R&D quality elements at each R&D steps. Third, a two-dimensional diagnosis model, which enables the objective measurement of the 'system compatibility' and 'accomplish level', is presented. The proposed method can provide an effective way to find opportunities for efficient quality improvement of R&D process.