• Korean Chemical Engineering Research
• /
• v.57 no.3
• /
• pp.413-419
• /
• 2019

In the recent, as a world demand of energy resources has been transformed from fossil fuels to hydrogen-based clean energy resources, a huge attention has been attracted to increase the performance and decrease a production cost of core materials in fuel cell technology. The utilization of reinforced composite membranes as electrolytes in the polymer electrolyte membrane fuel cells can reduce the use of high cost perfluorosulfonic acid (PFSA), mitigate the cell impedance, and improve the dimensional stability as well as the interfacial stability, giving rise to achieve both an improved performance and a reduction of production costs of the fuel cell devices. In this study, we investigate the effects of physical characteristics and cell performances according to the various ionomer solvents in the solution based manufacturing process of reinforced composite electrolyte membrane.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.1
• /
• pp.324-332
• /
• 2019

Most countries including Korea and Indonesia have strong policy for implementing biofuels like biodiesel. Shortage of the oil feedstock is the main barrier for increasing the supply of biodiesel fuel. In this study, in order to improve the stability of feedstock supply and lower the biodiesel production cost, the feasibility of biodiesel production using two types of Indonesian tropical crop oils, pressed at different harvesting times, were investigated. R. Trisperma oils, a high productive non-edible feedstocks, were investigated to produce biodiesel by esterification and transesterification because of it's high impurity and free fatty acid contents. the kindly provided oils from Indonesia were required to perform the filtering and water removal process to increase the efficiency of the esterificaton and transesterification reactions. The esterification used heterogeneous acid catalyst, Amberlyst-15. Before the reaction, the acid value of two types oil were 41, 17 mg KOH/g respectively. After the pre-esterification reaction, the acid value of oils were 3.7, 1.8 mg KOH/g respectively, the conversions were about 90%. Free fatty acid content was reduced to below 2%. Afterwards, the transesterification was performed using KOH as the base catalyst for transesterification. The prepared biodiesel showed about 93% of FAME content, and the total glycerol content was 0.43%. It did not meet the quality specification(FAME 96.5% and Total glycerol 0.24%) since the tested oils were identified to have a uncommon fatty acid, generally not found in vegetable oils, ${\alpha}$-eleostearic acid with much contents of 10.7~33.4%. So, it is required to perform the further research on reaction optimization and product purification to meet the fuel quality standards. So if the biodiesel production technology using un-utilized non-edible feedstock oils is successfully developed, stable supply of the feedstock for biodiesel production may be possible in the future.

• Journal of Bio-Environment Control
• /
• v.14 no.2
• /
• pp.95-105
• /
• 2005

This study was carried out to file up using effect and requirement of energy for environmental design data of Pleurotus eryngii growing houses. Heating and cooling Degree-Hour (D-H) were calculated and compared for. some Pleurotus eryngii growing houses of sandwich-panel (permanent) o. arch-roofed(simple) type structures modified and suggested through field survey and analysis. Also thermal resistance (R-value) was calculated for the heat insulating and covering materials of the permanent and simple-type, which were made of polyurethane or polystyrene panel and $7\~8$ layers heat conservation cover wall. The variations of heating and cooling D-H simulated for Jinju area was nearly linearly proportional to the setting inside temperatures. The variations of cooling D-H was much more sensitive than those of heating D-H. Therefore, it was expected that the variations of required energy in accordance with setting temperature or actual temperature maintained inside of the cultivation house could be estimated and also the estimated results of heating and cooling D-H could be effectively used far the verification of environmental simulation as well as for the calculation of required energy amounts. When the cultivation floor areas are all equal, panel type houses to be constructed by various combinations of materials were found to by far more effective than simple type pipe house in the aspect of energy conservation maintenance except some additional cost invested initially. And also the energy effectiveness of multi-span house compared to single span together with the prediction of energy requirement depending on the level insulated for the wall and roof area could be estimated. Additionally, structural as well as environmental optimizations are expected to be possible by calculating periodical and/or seasonal energy requirements for those various combinations of insulation level and different climate conditions, etc.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1620-1620
• /
• 2001

Forages, both grazed and conserved, provide the basis of ruminant production systems throughout the world. More than 90 per cent of the feed energy consumed by herbivorous animals world - wide were provided by forages. With such world - wide dependence on forages, the economic and nutritional necessity of been able to characterize them in a meaningful way is vital. The characterization of forages for productive animals is becoming important for several reasons. Relative to conventional laboratory procedures, Near Infrared Reflectance Spectroscopy (NIRS) offers advantages of simplicity, speed, reduced chemical waste, and more cost-effective prediction of product functionality. NIR spectroscopy represents a radical departure from conventional analytical methods, in that entire sample of forage is characterized in terms of its absorption properties in the near infrared region, rather than separate subsamples being treated with various chemicals to isolate specific components. This forces the analyst to abandon his/her traditional narrow focus on the sample (one analyte at a time) and to take a broader view of the relationship between components within the sample and between the sample and the population from which it comes. forage is usually analysed by NIRS in dry and ground presentation. Initial success of NIRS analysis of coarse forages suggest a need to better understand the potential for analysis of minimally processed samples. Preparation costs and possible compositional alterations could be reduced by samples presented to the instrument in undried and unground conditions. NIRS has gained widespread acceptance for the analysis of forage quality constituents on dry material, however little attention has been given to the use of NIRS for chemical determinations on undried and unground forages. Relatively few works reported the use of NIRS to determine quality parameters on undried materials, most of them on both grass and corn silage. Only two works have been found on the determination of quality parameters on fresh forages. The objectives of this paper were (1) to evaluate the use of NIRS for determination of nitrogen and moisture on undried and unground forage samples and (2) to explore two mathematical treatments and two NIR regions to predict chemical parameters on fresh forage. Four hundred forage samples (n: 400) were analysed in a NIRS 6500 instrument (NIR Systems, PA, USA) in reflectance mode. Two mathematical treatments were applied: 1,4,4,1 and 2,5,5,2. Predictive equations were developed using modified partial least squares (MPLS) with internal cross - validation. Coefficient of determination in calibration (${R^2}_{CAL}$) and standard error in cross-validation (SECV) for moisture were 0.92 (12.4) and 0.92 (12.4) for 1,4,4,1 and 2,5,5,2 respectively, on g $kg^{-1}$ dry weight. For crude protein NIRS calibration statistics yield a (${R^2}_{CAL}$) and (SECV) of 0.85 (19.8) and 0.85 (19.6) for 1,4,4,1 and 2,5,5,2 respectively, on a dry weight. It was concluded that NIRS is a suitable method to predict moisture and nitrogen on fresh forage without samples preparation.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.3
• /
• pp.325-329
• /
• 2004

Ten male buffalo calves (aged 6-8 months, average body wt. $88.5{\pm}0.5kg$) were divided into two groups of five animals in each. All the animals were fed on urea-ammoniated wheat straw (4% urea, 50% moisture) along with concentrate mixture (50:50 on DM basis). In addition animals in group II were given sodium sulphate to see the effect of sulphur on the utilization of nitrogen added through urea-ammoniation. This feeding practice continued for a period of 120 d, during which fortnightly body weights were taken to assess their growth rate. A metabolism trial was conducted after 90 days of feeding to know the digestibility of nutrients and their balance. Results revealed no significant difference in the intake of DM and other nutrients in two groups. The digestibility of DM, OM, EE, NDF, ADF and cellulose was alike in animals fed ammoniated straw and ammoniated straw+sodium sulphate supplemented group, whereas the digestibilities of CP and hemicellulose was significantly (p<0.01) more in group I and II respectively. There was no significant difference in intake of nitrogen, calcium and phosphorus in 2 groups. Similarly, the balance of these 3 nutrients was positive and statistically alike in two groups. Intake and excretion of sulphur through faeces and urine was significantly (p<0.01) more in group II than in group I. Inspite of higher excretion of sulphur through faeces and urine in group II, the sulphur balance was significantly (p<0.05) more in group II than in group I, probably due to significantly (p<0.01) higher intake of sulphur in this group. There was no significant difference in total body weight gain or average daily gain between two groups, indicating that addition of sodium sulphate did not have any positive effect on these parameters. Similarly the intake of DM, DCP and TDN were also alike in two groups. The DCP and TDN values of the two diets were 8.0, 60.4 and 6.8, 56.6% respectively. Feeding cost/unit gain was alike in both the groups.

• Journal of Korean Society of Transportation
• /
• v.33 no.4
• /
• pp.393-404
• /
• 2015

Gravity model has had the major problem that the model explains the characteristics of travel behavior with only deterrence factors such as travel time or cost. In modern society, travel behavior can be affected not only deterrence factors but also zonal characteristics or transportation service. Therefore, those features have to be considered to estimate the future travel demand accurately. In this regard, there are two primary aims of this study: 1. to identify the characteristics of inter-zonal travel, 2. to develop the new type of calibration method. By employing accessibility variable which can explain the manifold pattern of trip, we define the zonal travel behavior newly. Furthermore, we suggest 2-phase calibration method, since existing calibration method cannot find the optimum solution when organizing the deterrence function with the new variables. The new method proceeds with 2 steps; step 1.estimating deterrence parameter, step 2. finding balancing factors. The validation results with RMSE, E-norm, C.R show that this study model explains the inter-zonal travel pattern adequately and estimate the O/D pairs precisely than existing gravity model. Especially, the problem with estimation of short distance trip is overcomed. In conclusion, it is possible to draw the conclusion that this study suggests the possibility of improvement for trip distribution model.

• Asian Spine Journal
• /
• v.12 no.6
• /
• pp.973-980
• /
• 2018

Study Design: Retrospective review. Purpose: To identify the trends in stimulator use, pair those trends with various grafting materials, and determine the influence of stimulators on the risk of revision surgery. Overview of Literature: A large number of studies has reported beneficial effects of electromagnetic energy in healing long bone fractures. However, there are few clinical studies regarding the use of electrical stimulators in spinal fusion. Methods: We used insurance billing codes to identify patients with lumbar disc degeneration who underwent anterior lumbar interbody fusion (ALIF). Comparisons between patients who did and did not receive electrical stimulators following surgery were performed using logistic regression analysis, chi-square test, and odds ratio (OR) analysis. Results: Approximately 19% of the patients (495/2,613) received external stimulators following ALIF surgery. There was a slight increase in stimulator use from 2008 to 2014 (multi-level $R^2=0.08$, single-level $R^2=0.05$). Patients who underwent multi-level procedures were more likely to receive stimulators than patients who underwent single-level procedures (p<0.05; OR, 3.72; 95% confidence interval, 3.02-4.57). Grafting options associated with most frequent stimulator use were bone marrow aspirates (BMA) plus autograft or allograft for single-level and allograft alone for multi-level procedures. In both cohorts, patients treated with bone morphogenetic proteins were least likely to receive electrical stimulators (p<0.05). Patients who received stimulation generally had higher reimbursements. Concurrent posterior lumbar fusion (PLF) (ALIF+PLF) increased the likelihood of receiving stimulators (p<0.05). Patients who received electrical stimulators had similar revision rates as those who did not receive stimulation (p>0.05), except those in the multilevel ALIF+PLF cohort, wherein the patients who underwent stimulation had higher rates of revision surgery. Conclusions: Concurrent PLF or multi-level procedures increased patients' likelihood of receiving stimulators, however, the presence of comorbidities did not. Patients who received BMA plus autograft or allograft were more likely to receive stimulation. Patients with and without bone stimulators had similar rates of revision surgery.

• Journal of Broadcast Engineering
• /
• v.9 no.1
• /
• pp.17-31
• /
• 2004

This paper proposes an algorithm for the robust transmission of video in error Prone environment using multiple description codingby optimal split of DCT coefficients and rate-distortionoptimization framework. In MDC, a source signal is split Into several coded streams, which is called descriptions, and each description is transmitted to the decoder through different channel. Between descriptions, structured correlations are introduced at the encoder, and the decoder exploits this correlation to reconstruct the original signal even if some descriptions are missing. It has been shown that the MDC is more resilient than the singe description coding(SDC) against severe packet loss ratecondition. But the excessive redundancy in MDC, i.e., the correlation between the descriptions, degrades the RD performance under low PLR condition. To overcome this Problem of MDC, we propose a hybrid MDC method that controls the SDC/MDC switching according to channel condition. For example, the SDC is used for coding efficiency at low PLR condition and the MDC is used for the error resilience at high PLR condition. To control the SDC/MDC switching in the optimal way, RD optimization framework are used. Lagrange optimization technique minimizes the RD-based cost function, D+M, where R is the actually coded bit rate and D is the estimated distortion. The recursive optimal pet-pixel estimatetechnique is adopted to estimate accurate the decoder distortion. Experimental results show that the proposed optimal split of DCT coefficients and SD/MD switching algorithm is more effective than the conventional MU algorithms in low PLR conditions as well as In high PLR condition.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.83-83
• /
• 2018

"하천법" 제50조는 하천수의 사용용도를 생활 공업 농업 환경개선 발전, 그리고 주운 등 하천수 사용용도를 다양화하고 있으나, 하천수 사용료의 징수대상은 발전용수, 농업용수, 생공용수, 그 밖의 용수 등 4개 용수를 대상으로 하고 있다. 발전용수는 $100m^3/d$ 에 대하여 연액 231원, 농업용수는 $1,000m^3/d$에 대하여 연액 231원(발전용수의 1/10), 생활 및 공업, 기타용수는 댐용수대를 적용(2018년 현재 52.7원/$m^3$)하고 있다. 댐용수 요금의 산정은 '댐용수를 공급하는데 소요되는 총괄 원가를 보상하는 수준'에서 결정되며, 총괄원가는 '댐용수를 공급하는데 소요되는 적정원가에 댐용수사업에 공여하고 있는 자산에 대한 적정투자보수를 가산한 금액'으로 한다. 우리나라의 생활용수 및 공업용수는 이처럼 "한국수자원공사법" 제16조제2항에 따라 국토부장관이 승인한 댐용수 단가를 적용한다. 댐용수의 산정기준은 댐용수를 공급하는데 소요되는 총괄원가이지만, 하천수로서의 생활용수 및 공업용수가 이러한 댐용수 단가를 적용하는 이유에 대해서는 이론의 여지가 있을 수 있다. 댐용수는 1987년 최초로 전국 동일요금이 적용되었고 그 이후로도 주기적으로 요금이 인상되었으며, 발전 및 농업용수는 2008년 "하천법 시행령" 개정에 의해 사용료가 결정되었다. 농업용수와 발전용수는 각 지자체의 조례에 의해 요금을 부과하였는데 최초의 단가는 농업용수가 톤당 0.00032원, 발전용수는 톤당 0.0032원, 그리고 공업용수는 톤당 0.0076원이 부과되었다. 이후 1981년 조례의 개정에 따라 공업용수는 관경에 따라 차등적인 요금체계가 확립되었는데 대략 톤당 0.01원으로 기존에 단가에 비해 비약적으로 증가하였다. 농업용수 및 발전용수의 단가가 1984년 대비 2배 상승한 것에 비해 공업용수단가는 약 7,000배가 상승하였다. 생활용수의 경우, 기존 조례에서 따로 정하지 않았고 2008년 하천법 개정과 더불어 각 조례에 규정되었다. 즉 2008년 이전까지는 생활용수에 대해 따로 요금기준이 없었던 것으로 파악된다. 이에 비하여 농업용수 및 발전용수는 1984년 2배로 상승한 뒤 현재까지 동일한 요금을 부과하고 있다. 2008년에 개정된 "하천법 시행령" 제57조(하천수 사용료의 징수)의 농업용수 및 발전용수의 단가는 기존 조례의 단가를 그대로 "하천법"이 계승한 것으로 해당 용수의 단가가 특정한 과학적 기준으로 정해진 것으로 보기는 어렵다. 따라서 현재와 같이 용수단가별로 나타나는 커다란 차이는 각 용수의 용도 및 성격, 사회적 영향 등 용수 속성에 관한 사항과 더불어 회귀율과 취배수거리 등 다양한 요인을 적용한 산정기준을 적용하는 것이 바람직할 것이다.

• KIPS Transactions on Computer and Communication Systems
• /
• v.12 no.5
• /
• pp.171-180
• /
• 2023

The three major sleep disorders in Korea are snoring, sleep apnea, and insomnia. Lack of sleep is the root of all diseases. Some of the most serious potential problems associated with sleep deprivation are cardiovascular problems, cognitive impairment, obesity, diabetes, colitis, prostate cancer, etc. To solve these problems, the Korean government provided low-cost national health insurance benefits for polysomnography tests in July 2018. However, insomnia patients still have problems getting treated in terms of time, space, and economic perspectives. Therefore, it would be better for insomnia patients to be allowed to test at home. The measuring device can measure six biosignals (eye movement, tossing and turning, body temperature, oxygen saturation, heart rate, and audio). A gyroscope sensor (MPU9250, InvenSense, USA) was used for eye movement, tossing, and turning. The input range of the sensor was in 258°/sec to 460°/sec, and the data range was in the input range. Body temperature, oxygen saturation range, and heart rate were measured by a sensor (MAX30102, Analog Devices, USA). The body temperature was measured in 30 ℃ to 45 ℃, and the oxygen saturation range was 0% for the unused state and 20 % to 90 % for the used state. The heart rate measurement range was in 40 bpm to 180 bpm. The measurement of audio signal was performed by an audio sensor (AMM2742-T-R, PUIaudio, USA). The was -42 dB ±1 dB frequency range was 20 Hz to 20 kHz. The measured data was successfully received in wireless network conditions. The system configuration was consisted of a PC and a mobile app for bio-signal measurement and data collection. The measured data was collected by mobile phones and desktops. The data collected can be used as preliminary data to determine the stage of sleep and perform the screening function for sleep induction and sleep disturbances. In the future, this convenient sleep measurement device could be beneficial for treating insomnia.