• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.386-386
• /
• 2020

가뭄은 강수, 증발산, 대기온도, 토양수분 등 다양한 수문기상학적 인자들이 복합적으로 작용하여 발생되기 때문에 가뭄의 정확한 사상을 분석하는 것은 매우 어렵다. 또한 어떤 요인을 중심으로 고려하느냐에 따라 가뭄은 다양한 시각으로 정의되고 있다. 일정기간 평균 강수량보다 적은 강수로 인해 건조한 날이 지속되는 것, 즉 기상요소를 중심으로 가뭄을 정의하는 것을 기상학적 가뭄이라 하며, 작물의 생육에 필요한 수분을 중심으로 고려하는 것을 농업적 가뭄이라 한다. 또한 하천유량, 댐 저수량 등 전반적인 수자원 공급원의 부족을 수문학적 가뭄이라 한다. 이와 같이 다양하게 나타는 가뭄의 발생특성을 정량적으로 해석하기 위해 다양한 가뭄지수가 개발되어 왔다. 그러나 현재까지 개발된 가뭄지수들은 공통적으로 정형데이터를 활용하여 산정한다. 하지만 최근에는 비정형데이터를 활용하여 지수(Index)를 산정하거나, 재난관리에 적용하는 등 비정형 데이터의 활용이 급증하고 있다. 따라서 본 연구에서는 비정형 데이터(뉴스 데이터)를 활용하여 가뭄지수를 산정하고 기존의 가뭄지수들과의 상관성 분석을 실시 한 뒤, 지수결합을 통해 가뭄사상 분석의 새로운 방안을 제시하고자 하였다. 본 연구의 공간적범위는 2014~2015 충남서북부가뭄 지역 중 가장 큰 피해를 입었던 보령지역으로 선정하였으며 시간적범위는 2013~2016년으로 설정하였다. 비정형 데이터의 구축은 크롤링(Crawling)을 활용하여 네이버 뉴스의 기사를 수집하였으며 자료의 신뢰성을 위해 URL이 동일한 중복기사 및 '보령', '가뭄' 단어가 없는 기사는 제거하였다. 구축된 데이터를 기반으로 월별 빈도를 산출하고 표준점수(Z-score)로 환산하여 가뭄지수를 산정하였다. 산정된 가뭄지수가 어떤 가뭄의 유형(기상학적, 농업적, 수문학적)을 보이는지 확인하기 위해 기존의 가뭄지수들과 상관성분석을 실시하였으며, 가장 높은 상관성을 보이는 가뭄지수와 결합을 통해 새로운 가뭄 사상을 분석하였다. 본 연구에서 진행한 가뭄사상 분석은 향후 가뭄만이 아니라 다양한 재난분야에서 비정형 데이터를 활용한 분석의 기초로자료로 활용될 수 있을 것이다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.266-266
• /
• 2020

본 연구에서는 기후변화로 인한 남북공유하천유역의 미래 수문특성 변화를 전망하기 위해 ArcGIS 프로그램을 통해 산정된 격자형 수문특성 매개변수를 분포형 모형인 GRM에 적용하여 임진강유역의 미래 유출수문특성 변화를 분석하였다. 분포형 모형에 사용되는 강우량 자료는 기상관측소 단위로 상세화된 13개 전지구 기후 모델 중 RCP4.5, 8.5 시나리오의 공유하천유역 인접 11개 관측소별 빈도해석 결과를 시·공간적으로 분포하여 사용하였다. 또한 미래기간별 유출특성 변화추이를 분석하기 위하여 참조기간(1981-2005), 21세기 전반기(F1, 2011-2040), 중반기(F2, 2041-2070), 후반기(F3, 2071-2100)로 구분하여 분석을 실시하였다. 분석 결과 본 연구의 대상지점인 임진강유역은 기후변화로 인해 확률강우량이 증가하여 유역의 유출수문특성에 직접적인 영향이 있을 것으로 예측되었다. RCP 4.5 시나리오에서는 21세기 후반기인 F3에 확률강우량 및 유출량의 증가추세가 줄어들 것으로 전망되나, 참조기간 대비 F1에서 20.4%, F2에서 35.7%, F3에서 34.6%의 평균 유출량 증가율을 보였으며, RCP 8.5 시나리오에서는 F1에서 19.9%, F2에서 38.3%, F3에서 67.8%로 지속적인 증가가 전망되었다. 또한 첨두홍수량 발생시각은 참조기간 대비 약 4.6~13.3% 감소가 예상되었다. 기후변화로 인한 홍수량의 변화는 재해위험을 증가시킬 수 있으며, 이러한 상황에서 남한과 북한의 협력을 통한 유역통합관리의 필요성은 점차 커질 것으로 보인다. 이를 위해서는 정확한 수문학적 분석을 선행하여야 하며, 본 연구가 남북공유하천유역의 재해위험을 평가하는 기초자료로 활용될 수 있을 것으로 판단된다.

• Journal of Advanced Navigation Technology
• /
• v.27 no.5
• /
• pp.495-501
• /
• 2023

P-3C/K aircraft for maritime patrols that Republic of Korea Navy is using, is equipped with a variety of sensors and communication devices. Collected data from the aircraft is managed as tactical information by flight operators and stored. When the flight mission is completed, this information is transferred to tactical support center on the ground and played back or used for follow-up work through a analysis tool. During a flight mission, there are tens of thousands of detection objects within an hour in KADIZ (Korea air defense identification zone). In contrast, in TSD (tactical situation display), which displays a map when using the analysis tool, all detected objects are expressed as symbols. The increase in display symbols has a significant impact on the TSD image updating and consequently interferes with the smooth operation of operators. In this paper, we propose applying multiple threads and multiple layers to improve the performance of existing TSD. And the performance improvement is proven through the execution results.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.6
• /
• pp.97-102
• /
• 2023

This study is to provide improvement of tester for IoT system, which has recently become diversified and large-scale and It is about a method to improve the packet processing performance of the tester and securing flexibility in traffic protocol creation and operation. The purpose of this study is to design a OSS DPDK-based high-speed IoT network performance test system, which pre-verifies and measures the performance of data traffic transmission in an increasingly sophisticated high-capacity IoT network system. The basic structure of the high-speed IoT performance tester was designed using a DPDK-based traffic generator, the expected effect was suggested to traffic modeling and packet generation capability when the system was applied through experiments

• Tribology and Lubricants
• /
• v.40 no.1
• /
• pp.8-16
• /
• 2024

This study conducts numerical modeling and eigen-analysis of a rod-fastened rotor, which is mainly used in aircraft gas turbine engines in which multiple disks are in contact through curvic coupling. Nayak's theory is adopted to calculate surface parameters measured from the tooth profile of the curvic coupling gear. Surface parameters are important design parameters for predicting the stiffness between contact surfaces. Based on the calculated surface parameters, elastoplastic contact analysis is performed according to the interference between two surfaces based on the Greenwood-Williamson model. The equivalent bending stiffness is predicted based on the shape and elastoplastic contact stiffness of the curvic coupling. An equation of motion of the rod-fastened rotor, including the bending stiffness of the curvic coupling, is developed. Methods for applying the bending stiffness of a curvic coupling to the equation of motion and for modeling the equation of motion of a rotor that includes both inner and outer rotors are introduced. Rotordynamic analysis is performed through one-dimensional finite element analysis, and each element is modeled based on Timoshenko beam theory. Changes in bending stiffness and the resultant critical speed change in accordance with the rod fastening force are predicted, and the corresponding mode shapes are analyzed.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.23 no.3
• /
• pp.80-96
• /
• 2024

This study conducted over two rounds Delphi survey targeting experts in the fields of roads, transportation, automobiles, intelligent transport systems(ITS), and communications to analyze the direction of change in road design, operation, and systems in the Lv.4/4+ autonomous driving era. To construct the Delphi survey items, a basic survey was conducted. The first and second Delphi surveys targeted experts in fields closely related to autonomous driving. The results of the survey revealed an expectation that in the future, transportation operations would change focus to shared autonomous vehicle(AV) and public transportation transfers, and there would be corresponding changes in the cross-sectional configuration. Exclusive lanes for AV are expected to be introduced commencing from highways and general national roads, and there was a consensus that they should be installed in the center of the road rather than on the sides and would use the same lane width as that of the existing road. In terms of facilities for AVs, it was found that it would be necessary to expand pedestrian-vehicle separation facilities, insert communication chips into facilities for location recognition, advance precision maps, and expand roadside communication facilities.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.45 no.2
• /
• pp.161-173
• /
• 2019

In this study, the antioxidative and inhibitory activity of tyrosinase and collagenase for the solvent extract and silica column fractions of Artocarpus nitidus were evaluated. The activities were quantified using the 4 parameter logistic. LC/MS analysis showed that the major component of the fractions was polyphenol and the total polyphenol content of the extract was $48.1{\pm}2.6mg\;GAE/g$. The radical scavenging activities ($SC_{50}$) for 1,1-diphenyl-2-picrylhydrazyl of the extract, fraction-1 and fraction-2 were 16.7, 42.0 and $10.1{\mu}g/mL$, respectively. The value for fraction-2 was the closest to ascorbic acid ($1.5{\mu}g/mL$). The tyrosinase inhibitory activity of the extracts and the fractions showed $IC_{50}$ of 64.9, 0.9 and $1.2{\mu}g/mL$, respectively, and overall activity was higher than that of kojic acid ($7.4{\mu}g/mL$) and arbutin ($119.0{\mu}g/mL$). In the experiment by zebrafish embryo, the whitening activity of fraction-2 (27.5%) was higher than that of kojic acid (18.6%), and there was no adverse effect up to $500{\mu}g/mL$ of fraction-2. For the collagenase inhibitory activity, the samples showed $IC_{50}$ of 139.8, 20.6, and $16.8{\mu}g/mL$, respectively, which were competitive to 1, 10-Phenanthroline ($55.4{\mu}g/mL$). The extract and fraction-2 showed $IC_{50}$ of 61.8 and $67.1{\mu}g/mL$ for elastase. These results suggest that A. nitidus extract can be used as a cosmetic material useful for antioxidant, whitening, and prevention of skin aging without adverse effects.

• Progress in Medical Physics
• /
• v.14 no.2
• /
• pp.90-98
• /
• 2003

Purpose : A new virtual simulation technique for craniospinal irradiation (CSI) that uses a CT-simulator was developed to improve the accuracy of field and shielding placement as well as patient positioning. Materials and Methods : A CT simulator (CT-SIM) and a 3-D conformal radiation treatment planning system (3D-CRT) were used to develop CSI. The head and neck were immobilized with a thermoplastic mask while the rest of the body was immobilized with a Vac-Loc. A volumetric image was then obtained with the CT simulator. In order to improve the reproducibility of the setup, datum lines and points were marked on the head and body. Virtual fluoroscopy was performed with the removal of visual obstacles, such as the treatment table or immobilization devices. After virtual simulation, the treatment isocenters of each field were marked on the body and on the immobilization devices at the conventional simulation room. Each treatment fields was confirmed by comparing the fluoroscopy images with the digitally reconstructed radiography (DRR) and digitally composited radiography (DCR) images from virtual simulation. Port verification films from the first treatment were also compared with the DRR/DCR images for geometric verification. Results : We successfully performed virtual simulations on 11 CSI patients by CT-SIM. It took less than 20 minutes to affix the immobilization devices and to obtain the volumetric images of the entire body. In the absence of the patient, virtual simulation of all fields took 20 min. The DRRs were in agreement with simulation films to within 5 mm. This not only reducee inconveniences to the patients, but also eliminated position-shift variables attendant during the long conventional simulation process. In addition, by obtaining CT volumetric image, critical organs, such as the eyes and the spinal cord, were better defined, and the accuracy of the port designs and shielding was improved. Differences between the DRRs and the portal films were less than 3 m in the vertebral contour. Conclusion : Our analysis showed that CT simulation of craniospinal fields was accurate. In addition, CT simulation reduced the duration of the patient's immobility. During the planning process. This technique can improve accuracy in field placement and shielding by using three-dimensional CT-aided localization of critical and target structures. Overall, it has improved staff efficiency and resource utilization by standard protocol for craniospinal irradiation.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.16 no.2
• /
• pp.19-34
• /
• 2021

The government budget for promoting startup have been skyrocketed as catching up with increasing demands for high-tech startup by disruptive innovation resulted from rapid technology change. However, major trend of startup have still fallen on self-employed type of startup due to the lack of expertise and fund in spite of desperate government policy efforts. In reality, the access to high-tech startup has been very limited and too high huddle to would-be entrepreneur. This paper implement empirical analysis on the effects of entrepreneur competency and satisfaction level to government support, considering these as the KSF for the growth and success of high-tech startup, to the performance of the company. In particular, it focus on defining unique characteristics of high-tech startup through differential proving by the backgrounds of entrepreneur such as major, R&D experience, patent possession, CTO possession. This research carry out survey to 217 entrepreneurs in high-tech company in Daejon and Daegue at R&D Special Innopolis Zone. Research results are as follow. First, entrepreneurial achievement competencies, conceptualization competencies, network competencies and market recognition competencies positively affect the financial and non-financial performance and organizational and technical competencies, while organizational and technological competencies only positively impact on non-financial performance. Second, the satisfaction level of government support showed a positive moderating effect on entrepreneurial achievement competencies and financial performance, while no significant effect in other competencies. Third, positive differential effect by the technological background of entrepreneur such as Major, R&D experience, patent possession, CTO possession) have been confirmed. This paper deliver several significant implications and contributions, First, it propose classified and systematized entrepreneur competency through the domestic and foreign literature reviews. Second, it proves the need for the wider spread of team based startup culture rather then sole startup. Third, it also proves the important role of technological background of entrepreneur among the characteristics of high-tech startup.

• Food Engineering Progress
• /
• v.21 no.2
• /
• pp.132-137
• /
• 2017

The purpose of this study was to optimize dough properties using response surface methodology (RSM) and to demonstrate the performances of dough prepared under optimized conditions. Dough mixed with yeast, margarine, salt, sugar and wheat flour was prepared by fermentation process. Hardness, cohesiveness and springiness of dough were selected as critical quality attributes. The critical formulations (yeast and water) and process (fermentation time) variables were selected as critical input variables based on preliminary experiment. Box-Behnken design (BBD) was used as RSM. As a result, the quardratic, the squared and the linear model respectively provided the most appropriate fit ($R^2$>90) and had no significant lack of fit (p>0.05) on critical quality attributes (hardness, cohesiveness and springiness). The accurate prediction of dough characteristics was possible from the selected models. It was confirmed by validation that a good correlation was obtained between the actual and predicted values. In conclusion, the methodologies using RSM in this study might be applicable to the optimization of fermented foods containing various wheat flour and yeast.