• Knowledge Management Research
• /
• v.14 no.5
• /
• pp.15-34
• /
• 2013

In a turbulent environment, it is important for a firm to obtain competitiveness through acquiring new technologies and new knowledge. Many studies has shown that R&D has positive effects on innovation and performance. However, the limitation of resources and research personnel for SMEs leads to the needs of collaboration between government R&D and SMEs. The quantitative results of government R&D comes in the form of patents or publication of papers while the qualitative results comes in the form of commercialization (revenue increase or cost reduction) of the SMEs acquiring the technology through technology transfer. Korean government invested 16.9 Trillion Won in 2013 and achieved remarkable quantitative results but the qualitative results are still yet to be improved. The technology transfer rate in 2011 was 26.0% while the success rate of commercialization of the transferred technology is only 23.6%. Therefore it is meaningful to study the success factors of the technology commercialization in Korea. In this study, a case of technology commercialization between ETRI and Initech is studied. Initech was a venture firm which started in 1997 with 2 employees and after transfer of technology from ETRI in 1999, it has grown to a firm of 238 employees. In this study, Jolly's commercialization model was used to analyze the success factors of the commercialization. It was shown that four main factors that leads to the success are (1) mobilizing interest and endorsement through customer oriented R&D by ETRI, (2) mobilizing resources for demonstration through systematic technology commercialization process by ETRI, (3) mobilizing market constitutents through government standardization that leads to the reliability of the participants, and (4) mobilizing complementary assets for delivery by management strategies of Initech.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.26 no.5
• /
• pp.665-671
• /
• 2012

The purpose of this study is to examine the effect of Vigna angularis ethanol extract (VA-E) on papain induced arthritis in C57BL/10 mice. The C57BL/10 mice were injected with papain and oral administration of Vigna angularis ethanol extract (VA-E) at different doses (100 and 200 mg/kg) once a day for 42 days and compared with untreated mice. Histological examination and the measurement of inflammatory cytokine release were performed. The results showed that comparing with untreated mice, the treatment with Vigna angularis ethanol extract (VA-E) decreased the pathological changes of knee joint tissue. The level of inflammatory cytokine secreted from the tissues, such as IL-$1{\beta}$ (interleukin-$1{\beta}$), IL-6 (interleukin-6), TNF-${\alpha}$ (Tumor Necrosis Factor-${\alpha}$), were decreased. These results were confirmed by the quantification of cartilage volume using micro CT scanning. Consequently, Vigna angularis ethanol extract (VA-E) has a therapeutic potential in inflammatory joint diseases such as osteoarthritis.

• Journal of Animal Environmental Science
• /
• v.17 no.3
• /
• pp.197-204
• /
• 2011

During the process of anaerobic digestion, hydrolysis of substrate is the key factor determining methane production efficiency. The hydrolysis efficiency are directly affected by biodegradability of substrate. In this study, three types of pre-treatment methods were tested to enhance biodegradability effectiveness. By the application of blender and the Cavitation treatment, the SCODcr increased from 24,723 mg/l to 24.726~29,175 mg/l and to 25,589~26,456 mg/l, respectively. In case of ozone treatment, the SCODcr decreased from 24,723 mg/l to 22.540~23,988 mg/l. In batch experiment, there was a little improvement of the biochemical methane potential (BMP) by the blender and the cavitation treatment. In contrast, the BMP somewhat decreased by ozone treatment. This result shows that higher anaerobic digestion efficiency of livestock manure could be obtained through pre-treatment of substrate.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.4_1
• /
• pp.517-527
• /
• 2023

Many techniques have been proposed and investigated for microlens array manufacturing in three-dimensional (3D) structures. We present fabricating a microlens array using selective laser etching and a CO₂ laser. The femtosecond laser was employed to produce multiple micro-cracks that comprise the predesigned 3D structure. Subsequently, the wet etching process with a KOH solution was used to produce the primary microlens array structures. To polish the nonoptical surface to the optical surface, we performed reflow postprocessing using a CO₂ laser. We confirmed that the micro lens array can be manufactured in three primary shapes (cone, pyramid and hemisphere). Compared to our previous study, the processing time required for laser processing was reduced from approximately 1 hour to less than 30 seconds using the proposed processing method. Therefore, micro lens arrays can be manufactured using our processing method and can be applied to mass productionon large surface areas.

• Journal of Powder Materials
• /
• v.26 no.4
• /
• pp.305-310
• /
• 2019

In the present work, spheroidization of angular vanadium powders using a radio frequency (RF) thermal plasma process is investigated. Initially, angular vanadium powders are spheroidized successfully at an average particle size of $100{\mu}m$ using the RF-plasma process. It is difficult to avoid oxide layer formation on the surface of vanadium powder during the RF-plasma process. Titanium/vanadium/stainless steel functionally graded materials are manufactured with vanadium as the interlayer. Vanadium intermediate layers are deposited using both angular and spheroidized vanadium powders. Then, 17-4PH stainless steel is successfully deposited on the vanadium interlayer made from the angular powder. However, on the surface of the vanadium interlayer made from the spheroidized powder, delamination of 17-4PH occurs during deposition. The main cause of this phenomenon is presumed to be the high thickness of the vanadium interlayer and the relatively high level of surface oxidation of the interlayer.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.6_3
• /
• pp.1305-1314
• /
• 2023

The global ship repair and modification market is expected to grow up to approximately $ 30 billion by 2025. Korea's shipbuilding industry is leading the world grounded on its international competitiveness in design and production technology. The reality, however, is that the ship repair and modification industry is centered on Gyeongnam, and there are only two to three ship repair workplaces that can repair large ships. Therefore, domestic ship repair companies target small and medium-sized ships mainly. This is because there are few workplaces equipped with a large dock in which large ships like LNG ships can be inspected regularly or repaired, complaints are severe for environmental problems, and related environmental regulations are so strict that it is very hard to obtain government approval for the extension of ship repair and modification workplaces or the opening of new shipbuilding sites. Besides, on account of the workers' high wages, few experts related, and higher ship repair price compared to that of Southeast Asia, most of the volume of repairing large ships including domestic LNG ships is being lost to Southeast Asian or Chinese markets. In this study, the work process and pre-work preparation process for ship hull (winch, windlass, hatch cover, ramp door, cargo gear, anchor chain) repair were analyzed and presented to foster domestic ship repair experts and revitalize related industries.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.1
• /
• pp.1-14
• /
• 2023

To secure national future competitiveness, the Korean government announced the 『National Ultra-High Performance Computing (HPC) Innovation Strategy (2021.5.28.)』 and set three innovation strategy goals throughout establishing an innovation ecosystem. This study presented a heterogenous data-based strategic support framework that allowed to understand both the current status of domestic & foreign R&D areas and domestic industrial economy areas in terms of strategic fields related to ultra-high performance computing, and the empirical research was conducted in the life science and public health area. The HPC innovation ecosystem platform based on the connection of heterogeneous data (domestic R&D project-technology-industry-overseas R&D project) presented in this study provided useful and essential information that allowed establishing a specific action plan for the national HPC innovation strategy and contributing to vitalizing the innovation ecosystem. Since the evidence-based policy assumes that a more reasonable consensus is reached through a non-biased decision- making process among stakeholders, the proposed platform may contribute to enhancing policy momentum by increasing legitimacy and trust of planning of the national HPC strategy.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.26 no.5
• /
• pp.384-391
• /
• 2023

In modern electronic warfare, a number of radar emitters are in operation, causing radar receivers to receive high-density signal pulses that occur simultaneously. To analyze the radar signals more accurately and identify enemies, the sorting process of high-density radar signals is very important before analysis. Recently, machine learning algorithms, specifically K-means clustering, are the subject of research aimed at improving the accuracy of radar signal sorting. One of the challenges faced by these studies is that the clustering results can vary depending on how the initial points are selected and how many clusters number are set. This paper introduces a repeated K-means clustering algorithm that aims to accurately cluster all data by identifying and addressing false clusters in the radar sorting problem. To verify the performance of the proposed algorithm, experiments are conducted by applying it to simulated signals that are generated by a signal generator.

• Design & Manufacturing
• /
• v.17 no.1
• /
• pp.20-26
• /
• 2023

Lab-on-a-disc is a circular disc shape of cartridge that can be used for blood-based liquid biopsy to diagnose an early stage of cancer. Currently, liquid biopsies are regarded as a time-consuming process, and require sophisticated skills to precisely separate cell-free DNA (cfDNA) and circulating tumor cells (CTCs) floating in the bloodstream for accurate diagnosis. However, by applying the lab-on-a-disc to liquid biopsy, the entire process can be operated automatically. To do so, the lab-on-a-disc should be designed to prevent blood leakage during the centrifugation, transport, and dilution of blood inside the lab-on-a-disc in the process of liquid biopsy. In this study, the main components of lab-on-a-disc for liquid biopsy are fabricated by injection molding for mass production, and ultrasonic welding is employed to ensure the bonding strength between the components. To guarantee accurate ultrasonic welding, the flatness of the components is optimized numerically by using the response surface methodology with four main injection molding processing parameters, including the mold & resin temperatures, the injection speed, and the packing pressure. The 27 times finite element analyses using Moldflow® reveal that the injection time and the packing pressure are the critical factors affecting the flatness of the components with an optimal set of values for all four processing parameters. To further improve the flatness of the lab-on-a-disc components for stable mass production, a quarter-disc shape of lab-on-a-disc with a radius of 75 mm is used instead of a full circular shape of the disc, and this significantly decreases the standard deviation of flatness to 30% due to the reduced overall length of the injection molded components by one-half. Moreover, it is also beneficial to use a quarter disc shape to manage the deviation of flatness under 3 sigma limits.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.12 no.2
• /
• pp.20-26
• /
• 2013

This study focused on how it affects the surface roughness of work piece in cutting SCM415 steel, widely used steel in industry, by TiCN and TiN tools. Following conclusion was drawn from several experiments. The surface roughness of heat treated workpiece was better than that of non heat-treated materials. Moreover, the roughness of surface roughness(Ra 0.25) on feeding rate of 0.05 was better when it was in wet process, rather than dry process. As the feeding rate increases, TiCN coating tool shows better roughness of surface than TiN tool. Also, in heated treatment, TiCN coating tool shows the least straightness dimension deviation at feeding rate of 0.05, 0.15mm/rev, and concave-like R shape appears by the feeding rate orders of 0.05, 0.15, 0.1, 0.125 and 0.075mm/rev.