• Journal of Welding and Joining
• /
• 제26권2호
• /
• pp.1-4
• /
• 2008

• 한국전기화학회:학술대회논문집
• /
• 한국전기화학회 2004년도 추계총회 및 학술발표회
• /
• pp.26-26
• /
• 2004

• 기술혁신연구
• /
• 제15권2호
• /
• pp.1-24
• /
• 2007

In this study, we estimated a CES production function for the Korean economy. We have found in the empirical results that the elasticity of the factor substitution is less than one and that the Korean economy exhibits labor-saving technological progress. In addition, we obtained the regression coefficient of R&D investment on technological change, i.e., the elasticity of R&D investment with respect to the technological change was 0.26% point. It implies that if R&D stock increases by 1%, labor efficiency increases 0.26% point through technological progress which is Hicksian non-neutral. It confirms that innovation-based growth strategy by increasing R&D investment would be effective on the one hand. Some policy consideration on the other might be needed for an increase in employment which is offset by technological progress.

• 기술혁신연구
• /
• 제26권4호
• /
• pp.122-145
• /
• 2018

본 연구는 R&D인력이 경험하는 경력정체를 구조적 정체와 직무내용 정체로 구분하여 조직몰입과 관계를 규명하면서, 추가적으로 개인의 연령 및 창의적 행동특성이 경력정체와 조직몰입의 관계에 미치는 조절효과를 분석하는데 초점을 두고 있다. 국내 정부출연 연구기관에 근무하는 418명의 R&D 인력을 대상으로 실증 분석한 결과, 첫째 구조적 정체와 조직몰입의 관계는 연령에 따라서 차이를 보인다. 즉, 주니어 R&D인력일수록 구조적 정체가 조직몰입을 감소시키는 효과가 강하게 나타났다. 둘째 직무내용 정체는 조직몰입에 부정적인 영향을 미치며 개인의 창의적 행동특성에 따라서 차이를 보인다. 즉, 창의적 행동특성이 강한 R&D인력의 경우에 직무내용 정체와 조직몰입의 부정적 관계가 더욱 강하게 나타났다. 이러한 분석결과를 바탕으로 R&D인력의 경력정체 이슈에 관한 이론적인 함의 및 실무적 시사점에 대해 논의하였으며, 끝으로 연구의 한계점 및 향후 연구방향을 제시하였다.

• 한국염색가공학회지
• /
• 제19권3호
• /
• pp.18-25
• /
• 2007

The fixing behaviors of anthraquinone disperse dyes containing dimethylamino substituent, such as C. I. Disperse Violet 26(D.V.26) and C. I. Disperse Blue 14(D.V.14), or containing diamino substituent, such as C. I. Disperse Blue 73(D.B.73), and monochlorotriazinyl azo reactive dyes, such as C. I. Reactive Orange 13(R.O.13), C. I. Reactive Red 3(R.R.3). C. I. Reactive Yellow 2(R.Y.2) on polyester/cotton blend(P/C) fabrics were examined for the one-step printing of P/C fabrics. The high temperature steaming of $175^{\circ}C$ is the most satisfactory fixing method for P/C one-step printing with above disperse and reactive dyes among the four different fixing methods: $175^{\circ}C$ steaming, $102^{\circ}C$ steaming${\rightarrow}175^{\circ}C$ steaming, $190^{\circ}C$ thermosol, $102^{\circ}C$ steaming${\rightarrow}190^{\circ}C$ thermosol. $190^{\circ}C$ thermosol is unfit to fix R.R.3 and R.Y.2 whose heat stability is poor. It was found that D.V.26 and D.B.14 containing dimethylamino substituent are unstable for heat and alkali, but D.B.73 is stable for them to print P/C blend fabrics with R.O.13 which is also stable for heat. Therefore we found that D.B.73, R.O.13 and a pair of D.B.73 and R.O.13 were very suitable for one-step printing of P/C blend fabrics.

• 기술경영경제학회:학술대회논문집
• /
• 기술경영경제학회 2003년도 제23회 하계학술발표회 논문집
• /
• pp.26-40
• /
• 2003

Korean enterprises have increased their R&D efforts to a large scale since the 1990s, especially after IMF jurisdiction period. The number of research institutes and R&D resources increased sharply. In line with the increase of R&D efforts, this paper investigates how well Korean firms manage R&D capabilities. According to our analysis, Korean enterprises adopt about the 2.3th to 2.7th generation of R&D management. In spite of insufficient R&D resources, Korean SMEs adopt a similar level of R&D management practice to that of big firms. However, some big enterprises have already adopted the 4th generation of R&D management. Also, many SMEs adopt a much lower level of R&D management than average level. In this sense, it is necessary to make an in-depth study on firms'R&D management capabilities by utilizing various factors of R&D generation model.

• 한국전자파학회지:전자파기술
• /
• 제26권1호
• /
• pp.60-62
• /
• 2015

• 충청수학회지
• /
• 제26권2호
• /
• pp.393-402
• /
• 2013

For 0 < $p$ < ${\infty}$, ${\alpha}$ > -1 and 0 < $r$ < 1, we show that if $f$ is in the space of Dirichlet type $\mathfrak{D}^p_{p-1}$, then ${\int}_{1}^{0}M_{p}^{p}(r,f^{\prime})(1-r)^{p-1}rdr$ < ${\infty}$ and ${\int}_{1}^{0}M_{(2+{\alpha})p}^{(2+{\alpha})p}(r,f^{\prime})(1-r)^{(2+{\alpha})p+{\alpha}}rdr$ < ${\infty}$ where $M_p(r,f)=\[\frac{1}{2{\pi}}{\int}_{0}^{2{\pi}}{\mid}f(re^{it}){\mid}^pdt\]^{1/p}$. For 1 < $p$ < $q$ < ${\infty}$ and ${\alpha}+1$ < $p$, we show that if there exists some positive constant $c$ such that ${\parallel}f{\parallel}_{L^{q(d{\mu})}}{\leq}c{\parallel}f{\parallel}_{\mathfrak{D}^p_{\alpha}}$ for all $f{\in}\mathfrak{D}^p_{\alpha}$, then ${\parallel}f{\parallel}_{L^{q(d{\mu})}}{\leq}c{\parallel}f{\parallel}_{\mathcal{B}_p(q)}$ where $\mathcal{B}_p(q)$ is the weighted Besov space. We also find the condition of measure ${\mu}$ such that ${\sup}_{a{\in}D}{\int}_D(k_a(z)(1-{\mid}a{\mid}^2)^{(p-a-1)})^{q/p}d{\mu}(z)$ < ${\infty}$.

• Journal of Korea Trade
• /
• 제26권5호
• /
• pp.23-38
• /
• 2022

Purpose - This research intends to find out whether R&D cost stickiness shows differentiated aspects depending on exports in Korea. A cost behavior that indicates a lower rate of costs decrease when sales decrease than the rate of costs increase when sales increase is called cost stickiness. This sticky cost behavior is caused by considering the adjusting costs. This study aims to empirically verify that R&D cost stickiness is greater in export firms than in non-export firms. We also investigate the effect of exports on R&D cost stickiness is nonlinear. Design/methodology - We obtain data for the analysis from Kis-Value and TS2000 from 2012 to 2020. This study tests for R&D cost stickiness of exports using the cost stickiness model developed by Anderson et al. (2003) that is used in a lot of prior literature. To explore the nonlinear behavior of R&D cost stickiness we include a quadratic term of exports in our model. Findings - The results of our analysis are as follows. First, we observed that R&D costs of export firms are more sticky than that of non-export firms. Our result indicated that export firms are less likely to reduce R&D costs in decreasing sales periods in preparation for future sales recovery. Second, our empirical evidence shows that export firms view R&D costs much favorably. However, we hypothesize that the effect of export intensity on R&D costs may not necessarily be linear. Our result shows the effect of exports intensity on R&D stickiness is thus nonlinear, forming a reverse U-shaped curve. When export intensity exceeds a certain threshold, the growth rate of R&D costs appears to be viewed negatively. Firms with relatively high export intensity do not support R&D costs, viewing them as taking away firms' resources from other more productive costs. On the contrary, those with export intensity under the threshold view R&D costs as beneficial and therefore promote further R&D costs when revenue decreases. Originality/value - The results of this research can contribute academically to the expansion of empirical research on R&D cost stickiness. R&D cost stickiness varies by industry. As a result of our research, the managers of export firms recognize the importance of R&D to lead innovation. We expected that this research contributes to further studies on R&D costs and cost stickiness. Second, this research has implications from a business perspectives. Our findings of export firms' R&D stickiness suggest that export firms' managers should consider keeping the stickiness of R&D when revenue decreases because it is essential for exporting firms to maintain their R&D stickiness to secure long-term competitiveness. R&D stickiness can be used on a practical basis to emphasize the need for continuous investment in exporting firms' R&D activities.

• 대한화장품학회지
• /
• 제34권3호
• /
• pp.175-181
• /
• 2008

생체 친화성 에칠셀룰로오스 막제를 사용하여 자발적인 유화확산에 의하여 레티닐 팔미테이트를 봉입한 나노입자를 제조하였다. 분산매인 유화제로는 폴리소로베이트 20, 폴리소르베이트 60, 피피지 26-부테스-26/피이지-40 하이드로제네이티드캐스터오일를 이용하여 제조하였으며, 본 결과로서 나노크기 입자를 제조하기에 가장 적절하며 안정한 조건은 1w/v% 에칠셀룰로오스와 3w/v% 폴리소그베이트 60 수용액을 이용한 것이었으며, 레티닐 팔미테이트의 봉입률을 최대화하기 위한 조건은 2w/v% 에칠셀룰로오스와 1w/v% 폴리소르베이트 60 수용액을 이용한 제조 조건이었다. 또한 이 최적 조건에 다른 유효성분에도 적용 가능한 것을 확인하였다.